球－盘微动摩擦件磨损体积的测量与计算

一般地说，由于微动磨损量很小，测定非常困难，所得结果的误差通常都相当大．尽管几十年来人们对微动磨损进行了好些研究，然而至今却还没有建立起统一而完善的微动磨损量的测量和计算方法，以至很难对试验结果进行定量比较．因此，根据ＳＲＶ微动磨损试验机的工作原理，利用几何和数学分析手段提出了一种能够比较精确地测量和计算球－盘接触型微动摩擦件磨损量的方法，并且利用不同的模型对计算方法进行简化，从而得出了球和盘的磨损体积计算公式。只要借助轮廓仪和读数显微镜测量出有关参数，就可以比较精确地计算出球和盘的微动磨损体积，为了验证这种计算方法的实用性和可靠性，还进行了５２１００钢对不同含钨量的Ｎｉ－Ｗ合金镀层的ＳＲＶ微动磨损试验，测量结果与计算结果具有较好的一致性，由此可见，根据所提计算方法得到的计算结果，不仅可以增强ＳＲＶ试验机测试结果的可比性，也为利用这种试验机深入开展微动磨损研究提供了参照依据。     

Direct In Situ Investigation of Milling Reactions Using Combined X‐ray Diffraction and Raman Spectroscopy

The combination of two analytical methods including time‐resolved in situ X‐ray diffraction (XRD) and Raman spectroscopy provides a new opportunity for a detailed analysis of the key mechanisms of milling reactions. To prove the general applicability of our setup, we investigated the mechanochemical synthesis of four archetypical model compounds, ranging from 3D frameworks through layered structures to organic molecular compounds. The reaction mechanism for each model compound could be elucidated. The results clearly show the unique advantage of the combination of XRD and Raman spectroscopy because of the different information content and dynamic range of both individual methods. The specific combination allows to study milling processes comprehensively on the level of the molecular and crystalline structures and thus obtaining reliable data for mechanistic studies.     

On slice hyperholomorphic fractional Hardy spaces

In this paper we introduce and study the fractional Hardy spaces of the half space and of the unit ball in the quaternionic setting. In particular, we discuss their properties of invariance and of factorization in terms of functions in the Hardy space of the half space in the first case, and in terms of a suitable reproducing kernel Hilbert space in the case of the unit ball.     

Volterra核函数法在轴承滚珠磨损中的特征提取及应用

针对滚动轴承滚珠磨损故障特征难以提取的问题,提出一种基于多脉冲激励法下的Volterra级数核的求解算法.该方法是一种非线性系统模型的“交叉”诊断法,利用轴承系统输入输出的采样信号,建立Volterra非线性辨识系统模型,并运用多脉冲激励Volterra低阶核求解算法,将得到的低阶核通过时域和频域进行对比来判断轴承当前所处的运行状态.该文以无心车床主轴轴承为例进行实验验证,并与传统的小波分析法对比得出:多脉冲激励法能够方便准确地提取轴承的故障特征,该方法对此类故障的诊断具有一定的借鉴意义.     

Milling Bifurcations from Structural Asymmetry and Nonlinear Regeneration

This paper investigates multiple modeling choices for analyzing the rich and complex dynamics of high-speed milling processes. Various models are introduced to capture the effects of asymmetric structural modes and the influence of nonlinear regeneration in a discontinuous cutting force model. Stability is determined from the development of a dynamic map for the resulting variational system. The general case of asymmetric structural elements is investigated with a fixed frame and rotating frame model to show differences in the predicted unstable regions due to parametric excitation. Analytical and numerical investigations are confirmed through a series of experimental cutting tests. The principal results are additional unstable regions, hysteresis in the bifurcation diagrams, and the presence of coexisting periodic and quasiperiodic attractors which is confirmed through experimentation.     

三种典型磨粒磨损磨屑形成过程的研究

作者利用扫描电子显微镜、光学显微镜和计算机图象分析系统,对3种典型磨粒磨损磨屑的形成特点和典型试验条件下材料的磨粒磨损过程进行了研究。结果表明,在磨粒磨损条件下,典型的磨屑形态主要是切屑和块状屑,同时还有极少量的球状屑和花状屑。作者指出,切屑和块状屑分别是磨粒与被磨材料表面一次和多次相互作用的产物。在三体磨粒磨损条件下,切削是造成编号为2M和3M等硬质材料磨损的主要原因,也是4M和几种奥氏体锰钢在高载荷下磨损的重要形式;块状屑的形成是塑性较好的材料在各种磨损条件下磨损的主要形式。球状屑的形成是磨粒与被磨材料表面的接触点产生高温致使材料熔化的结果。球状屑一般是中空且表面有很多孔洞的球壳,其形成与气体有关。     

Evaluation of grinding methods for pellets preparation aiming at the analysis of plant materials by laser induced breakdown spectrometry

It has been demonstrated that laser induced breakdown spectrometry (LIBS) can be used as an alternative method for the determination of macro (P, K, Ca, Mg) and micronutrients (B, Fe, Cu, Mn, Zn) in pellets of plant materials. However, information is required regarding the sample preparation for plant analysis by LIBS. In this work, methods involving cryogenic grinding and planetary ball milling were evaluated for leaves comminution before pellets preparation. The particle sizes were associated to chemical sample properties such as fiber and cellulose contents, as well as to pellets porosity and density. The pellets were ablated at 30 different sites by applying 25 laser pulses per site (Nd:YAG@1064 nm, 5 ns, 10 Hz, 25 J cm⁻²). The plasma emission collected by lenses was directed through an optical fiber towards a high resolution echelle spectrometer equipped with an ICCD. Delay time and integration time gate were fixed at 2.0 and 4.5 μs, respectively. Experiments carried out with pellets of sugarcane, orange tree and soy leaves showed a significant effect of the plant species for choosing the most appropriate grinding conditions. By using ball milling with agate materials, 20 min grinding for orange tree and soy, and 60 min for sugarcane leaves led to particle size distributions generally lower than 75 μm. Cryogenic grinding yielded similar particle size distributions after 10 min for orange tree, 20 min for soy and 30 min for sugarcane leaves. There was up to 50% emission signal enhancement on LIBS measurements for most elements by improving particle size distribution and consequently the pellet porosity.     

具多重氢键寡聚芳酰胺的合成及自组装

含六重氢键寡聚芳酰胺双分子链在没有相应互补链的情况下, 其中一条链发生自组装. 通过紫外-可见(UV-Vis)光谱、动态光散射(DLS)、扫描电镜(SEM)和透射电镜(TEM)等实验手段, 对其自组装行为进行了研究. 实验结果表明, 在1,2-二氯乙烷中随温度升高在紫外区吸收发生蓝移, 说明酰胺自组装体部分解聚. 该分子链在不同极性的溶剂中都能发生自组装, 并随极性不同表现为不同的形貌. 如在甲苯中呈网状结构, 在极性相对较弱的二氯甲烷和环己烷的混合溶剂中为不规则的蜂窝状结构, 而在三氯甲烷和甲醇组成的极性混合溶剂中则组装成稳定的实心微球, 其直径随着浓度升高而增大, 通过在乙腈中的降温过程, 观察到组装体形貌由管状纤维向实心球的转变.     

固相力化学改性高聚物的方法研究

在固相应力作用下高聚物分子结构可被削弱或破坏,化学键可能发生畸变或断裂。固相力化学改性高聚物是研究各种高聚物因机械力影响而发生化学或物理化学变化的方法。由于该方法具有适用性广、产品纯净、操作方便、效率高、简便、节能、无污染等优点而成为高聚物改性的重要方法之一。本文系统综述了高聚物的固相剪切粉碎、固相磨盘型碾磨粉碎、高能...     

Milli-free flow electrophoresis: I. Fast prototyping of mFFE devices

We coin a term of milli-free flow electrophoresis (mFFE) to describe mid-scale FFE with flow rates intermediate to macro-FFE and micro-FFE (μFFE). Introduced decades ago, mFFE did not find practical applications. We revive mFFE, as we view it as a viable purification complement to continuous synthesis in capillary reactors with product flow rates of ～5 to 2000 μL/min, too small for macro-FFE but too large for μFFE. The development of the tandem of continuous synthesis/purification will require the production and evaluation of a large number of prototypes of mFFE devices. As the first step, we developed a fast (<24 h) and economical (～$10) method for prototyping mFFE devices using a robotic milling machine. mFFE prototypes are constructed from two machined matching poly(methyl methacrylate) (PMMA) substrates, which are bonded in 10 min using dichloromethane to provide a strong and irreversible seal. Using the developed prototyping technology, we designed and evaluated 25 prototypes of mFFE devices. By optimizing the feed rates and rotational speeds of the drills, the depth of the electrode channels, the dimensions of the entrance and exit reservoirs, the sample flow rate, and the diameter and position of the sample input, we were able to achieve indefinitely long operation of the device with cycles of alternating 15-min electrophoresis and 0.5-min regeneration (bubble removal). The test analytes, rhodamine B and fluorescein, were baseline resolved by mFFE for flow rates ranging from 10 to 600 μL/min. These results prove that our prototyping approach is suitable for the challenging task of multi-parameter optimization of mFFE devices.