脉管制冷机直流机理研究和抑制方法探讨

双向进气脉管制冷机中存在的直流流动不仅增加了冷端换热器的负载 ,降低了脉管制冷机的性能 ,而且还是引起脉管制冷机制冷温度不稳定的一个重要原因。文中从流体网络理论出发 ,分析了直流产生的机理 ,对目前各种抑制方法进行了探讨 ,指出了进一步研究的方向。     

螺旋管锅炉反应器管内汽液两相流压力降脉动研究

本又根据闭式循环热动力推进系统中锅炉反应器的各种可能的航行方向及运行参数，对螺旋管内汽液两相流压力降脉动特性进行了系统的试验研究，首次区分了两类不同特征的压力降脉动并得到了各主要因素的影响现律和发生脉动的界限准则。     

原子吸收光谱法测定气样中一氧化碳的研究

本文研究了用自制Ｎｉ（ＣＯ）４发生管和电加热石英管原子化器间接测定一氧化碳的条件，探讨了Ｎｉ（ＣＯ）４的产生和在石英管中原子化效率及干扰消除。     

真空光电探测器件的发展动向及其应用

真空光电探测器件的发展动向及其应用陈举忠（南京电子器件研究所，２１００１６）［摘要］介绍光电倍增管、高灵敏度高分辨率视像管、ＥＢＣＣＤ／像增强器、条纹管类光电探测器的发展现状及其应用。关键词：光电探测器，光电倍增管，视像管，条纹管ＴＨＥＤＥＶＥＬＯＰ...     

Ultramicro determination of organic halogens using sealed tube dry combustion method

A sealed tube dry combustion method that is simple, accurate, and precise for ultramicro determination of halogens in organic compounds has been developed. Samples below 1 mg are heated at 580 °C for 1 h in an electric furnace. After the combustion and absorption of the gaseous halogen, the interior of the tube is rinsed. Subsequent titration is carried out potentiometrically with silver nitrate and yielded standard deviations of 0.21% for chlorine, 0.17% for bromine, and 0.25% for iodine.     

圆扫描变像管人卫激光测距技术研究

在本文中,我们设计并研制了用于毫米级精度人卫激光测距的圆扫描时间分析系统。研制的圆扫描变像管理论时间分辨率可优于3ps,可用于双色测距;偏转灵敏度高达10cm/kV,偏转空间分辨率优于24lp/mm;利用双MCP内增强,增益～1×10⁶,并有门控功能以进一步提高信噪比和动态范围。扫描控制电路能提供300MHz、10W的正弦信号,其频率、幅度、相位稳定度均可满足要求。调试过程中较好地解决了阻抗变换、空间干扰和相位正交等关键问题。在仅2W的RF功率驱动下,即可实现稳定的φ24mm的圆扫描,系统实测时间分辨率达4.8ps。在实验室实测测距精度达亚毫米级。动态实验及模拟测距表明,该时间分析系统可满足第四代人卫激光测距系统的需要。     

火焰原子吸收法测定大豆、茶叶及合金中微量铁和锰

本文用ＦＡＡＳ法对大豆、茶叶及合金中的铁和锰进行研究［１－４］。根据实验结果，铁的变异系数为１．０～３．７％，回收率为９８～１０１％；锰的变异系数为２．４～３．５％，回收率９７～１０３％，均得到较为满意的结果，具有较好的实用价值。     

植物研究用γ射线成像系统设计

为了利用正电子发射断层成像技术在植物生理功能研究中的优势,正在开发由两个探测器相向放置构成的γ射线成像系统.系统中采用的探测器是由10×10的氧正硅酸镥(LSO)晶体阵列与滨松R5900-C12耦合组成.单个LSO尺寸为1.8mm×1.8mm×10mm.根据PET应用的特点,测试了该探测器的性能.所有闪烁晶体的图像在位置图谱中清楚可见;511keV全能峰处的能量分辨率位于14.5%—22%之间;符合时间分辨率随着位置灵敏光电倍增管的供给电压的增加而得到改善.这些实验结果表明,该LSO探测器适于构造高分辨率的双探测器成像系统.     

单缝石英管火焰原子吸收法测定蒜头、茶叶、大米中微量硒

本法利用单缝石英管，提高火焰原子吸收法的灵敏度并降低测试成本。方法用于大米、蒜头、茶叶中硒的测定，获得满意的结果。     

Flexural vibration analyses of piezoelectric ceramic tubes with mass loads in ultrasonic actuators

Based on Timoshenko beam model, a theoretical model of radially polarized piezoelectric ceramic tubes is investigated. In the model, the piezoelectric effects are considered, and the shear correction factor is introduced which reveals effects of the size of the cross-section and Poisson’s ratio. Based on the model, the particular attentions are devoted to effects of the boundary conditions at two ends on flexural resonance frequencies of the piezoelectric ceramic tubes. Changing the sizes of the tubes and the mass loads at both free ends, the variations of the flexural resonance frequencies of free–free piezoelectric ceramic tubes are calculated theoretically. Besides, the flexural resonance frequencies of the piezoelectric ceramic tube cantilevers with mass loads at one free end are also investigated theoretically. To verify accuracy of the theoretical mode, the flexural resonance frequencies for different lengths of the piezoelectric ceramic tubes and different loaded masses are measured experimentally. The theoretical results agree well with the experimental measurement, which demonstrates that the model is accurate for analyzing the flexural resonance frequencies of the piezoelectric ceramic tubes with mass loads.