Data-fusion of high resolution X-ray CT,SEM and EDS for 3D and pseudo-3D chemical and structural characterization of sandstone

When dealing with the characterization of the structure and composition of natural stones, problems of representativeness and choice of analysis technique almost always occur. Since feature-sizes are typically spread over the nanometer to centimeter range, there is never one single technique that allows a rapid and complete characterization. Over the last few decades, high resolution X-ray CT (μ-CT) has become an invaluable tool for the 3D characterization of many materials, including natural stones. This technique has many important advantages, but there are also some limitations, including a tradeoff between resolution and sample size and a lack of chemical information. For geologists, this chemical information is of importance for the determination of minerals inside samples. We suggest a workflow for the complete chemical and structural characterization of a representative volume of a heterogeneous geological material. This workflow consists of combining information derived from CT scans at different spatial resolutions with information from scanning electron microscopy and energy-dispersive X-ray spectroscopy.     

Xe~(26+)入射Au靶离子L壳层空穴的产生与退激辐射

基于两体碰撞过程的能量与角动量守恒,推导出Xe26+离子与Au原子碰撞过程,单离子的L壳层空穴产额与离子动能的理论关系.实验测定了动能2.4-3.6Me V的Xe26+离子入射Au靶,产生的Xe的L-X射线谱,获得了射线产额与离子入射动能的实验关系.结果表明,碰撞过程产生Xe L壳层空穴的同时,产生了一定数目的 M壳层空穴,导致L壳层空穴平均荧光产额显著变大,在实验能量范围,空穴产额的理论值与射线产额的实验值存在较好的一致性.     

Direct sunlight responsive Ag–ZnO heterostructure photocatalyst: Enhanced degradation of rhodamine B

The catalytic activity of Ag–ZnO heterostructure on the photocatalytic degradation of rhodamine B was investigated. It demonstrated that Ag–ZnO heterostructure exhibited an enhanced photocatalytic activity compared to pure ZnO nanoparticles under direct sunlight. The possible factors to the photocatalytic acitivity of the sample were explored, including Ag content, dispersity and calcination temperature. It was shown that the sample dispersed by PVP, with 5% mol ratio Ag content, calcined at 400 °C showed the highest photocatalytic acitivity and this catalyst was reusable.     

Ferroelectric phase transition and optical performance of PLZnNZT transparent ceramics

Lead-based Pb_0.97La_0.02(Zn_1/3Nb_2/3)_0.3(Zr_0.53Ti_0.47)_0.7O₃ (PLZnNZT) transparent ceramics with the addition of 2 wt% excess PbO were prepared by hot-pressing sintering method. The hot-pressing sintered PLZnNZT ceramics exhibit dense and large-grained microstructure, and perovskite structure with distorted cubic-like symmetry. The ceramics exhibit normal ferroelectric-like dielectric behavior with slightly diffused ferroelectric phase transition characteristic. The PLZnNZT ceramics exhibit fully developed, symmetric and saturated P–E hysteresis loop and large piezoelectric constant d₃₃, being 468 pC/N. The ceramics with 120 μm thickness exhibit maximum transmittance of 53% at 850 nm when Fresnel losses was not included, almost totally transparent in the mid IR region (2500–5600 nm), and low-lying optical band gap energy E_g of 3.23 eV. Three diffused Raman bands centering around 240 cm⁻¹, 560 cm⁻¹ and 750 cm⁻¹ are observed by micro-Raman spectroscopy, which can be attributed to F2g [BO₆] bending vibration, A1g [BO₆] stretching vibration and “soft mode” mixed by the bending and stretching vibrations, respectively, confirming the normal ferroelectric-like characteristic.     

BaCO3 mediated modifications in structural and magnetic properties of natural nanoferrites

Preparing M-type barium hexaferrite and improving the magnetic response of natural ferrites by incorporating barium carbonate (BaCO₃) is ever-demanding. Series of barium carbonate doped ferrites with composition (100−x)Fe₃O₄·xBaCO₃ (x=0, 10, 20, 30 wt%) are prepared through solid state reaction method and sintered gradually at temperatures of 800 and 1000 °C. Nanoparticles of natural ferrite and commercial BaCO₃ are used as raw materials. Impacts of BaCO3 on structural and magnetic properties of these synthesized ferrites are inspected. The obtained ferrites are characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM) at room temperature. Uniform barium hexaferrite particles in terms of both morphology and size are not achieved. The average crystallite size of BaFe₁₂O₁₉ is observed to be within 30–600 nm. The sintering process results phase transformation from Fe₃O₄ (magnetite) to α-Fe₂O₃ (hematite) and the formation of hexagonal barium ferrite crystals. The occurrence of barium crystal is found to enhance with the increase of BaCO₃ concentrations up to 20 wt% and suddenly drop at 30 wt%. Saturation and remanent magnetization of the doped ferrites are significantly augmented up to 16.37 and 8.92 emu g⁻¹, respectively compared to their pure counterpart. Furthermore, the coercivity field is slightly decreased as BaCO₃ concentrations are increased. BaCO₃ mediated improvements in the magnetic response of natural ferrites are demonstrated.     

Green synthesis and characterization of Au@Pt core–shell bimetallic nanoparticles using gallic acid

In this study, we developed a facile and benign green synthesis approach for the successful fabrication of well-dispersed urchin-like Au@Pt core–shell nanoparticles (NPs) using gallic acid (GA) as both a reducing and protecting agent. The proposed one-step synthesis exploits the differences in the reduction potentials of AuCl₄⁻ and PtCl₆²⁻, where the AuCl₄⁻ ions are preferentially reduced to Au cores and the PtCl₆²⁻ ions are then deposited continuously onto the Au core surface as a Pt shell. The as-prepared Au@Pt NPs were characterized by transmission electron microscope (TEM); high-resolution transmission electron microscope (HR-TEM); scanning electron microscope (SEM); UV-vis absorption spectra (UV-vis); X-ray diffraction (XRD); Fourier transmission infrared spectra (FT-IR). We systematically investigated the effects of some experimental parameters on the formation of the Au@Pt NPs, i.e., the reaction temperature, the molar ratios of HAuCl₄/H₂PtCl₆, and the amount of GA. When polyvinylpyrrolidone K-30 (PVP) was used as a protecting agent, the Au@Pt core–shell NPs obtained using this green synthesis method were better dispersed and smaller in size. The as-prepared Au@Pt NPs exhibited better catalytic activity in the reaction where NaBH₄ reduced p-nitrophenol to p-aminophenol. However, the results showed that the Au@Pt bimetallic NPs had a lower catalytic activity than the pure Au NPs obtained by the same method, which confirmed the formation of Au@Pt core–shell nanostructures because the active sites on the surfaces of the Au NPs were covered with a Pt shell.     

A novel ammonia-assisted method for the direct synthesis of Mn3O4 nanoparticles at room temperature and their catalytic activity during the rapid degradation of azo dyes

In this study, we prepared trimanganese tetroxide nanoparticles from MnCl₂ solution in an ammonia atmosphere using a new surfactant-free method at room temperature. We analyzed and characterized the effects of different processing conditions, such as the concentrations of manganese and the ammonia source, as well as the reaction time, on the structure, purity, and morphology of the products using powder X-ray diffraction (XRD), scanning electron microscopy, and Fourier transformation infrared spectroscopy (FTIR) techniques. The XRD and FTIR analyses confirmed that the prepared products comprised single phase Mn₃O₄. At room temperature, the paramagnetic characteristics were also verified by vibrating sample magnetometry. Furthermore, we tested the catalytic activity of the nanoparticles during the degradation of methyl orange and Congo red, which are organic pollutants. Our experiments demonstrated the rapid color removal and reduction in the chemical oxygen demand (>70% and >50% within 10 min, respectively) using aqueous solutions of azo dyes.     

Magnetic properties of iron nitride films prepared by oblique sputtering under different nitrogen gas flow ratios (N2/N2+Ar)

Iron nitride thin films were prepared on Si (100) substrates by oblique radio-frequency reactive magnetron oblique sputtering. Structures, phases and magnetic properties were investigated as a function of nitrogen gas flow ratio F_N(F_N=F_N2/(F_N2+F_Ar)×100%). When F_N is in the range of 2–7%, the iron nitride films show amorphous or nano-crystalline structures, which exhibit good soft magnetic properties. With 3%≤F_N≤6%, films show in-plane uniaxial magnetic anisotropy. Both intrinsic damping factor α_in and extrinsic damping factor α_ex of the iron nitride films increase with increasing F_N. The film deposited under F_N=6% with the resonance frequency f_r=3.3 GHz and full width at half-maximum Δf=3.6 GHz has great potential for high-frequency electromagnetic shielding applications.     

High pressure studies using two-stage diamond micro-anvils grown by chemical vapor deposition

Ultra-high static pressures have been achieved in the laboratory using a two-stage micro-ball nanodiamond anvils as well as a two-stage micro-paired diamond anvils machined using a focused ion-beam system. The two-stage diamond anvils’ designs implemented thus far suffer from a limitation of one diamond anvil sliding past another anvil at extreme conditions. We describe a new method of fabricating two-stage diamond micro-anvils using a tungsten mask on a standard diamond anvil followed by microwave plasma chemical vapor deposition (CVD) homoepitaxial diamond growth. A prototype two-stage diamond anvil with 300?µm culet and with a CVD diamond second stage of 50?µm in diameter was fabricated. We have carried out preliminary high pressure X-ray diffraction studies on a sample of rare-earth metal lutetium sample with a copper pressure standard to 86?GPa. The micro-anvil grown by CVD remained intact during indentation of gasket as well as on decompression from the highest pressure of 86?GPa.