Screen-printed electrochemical hybridization biosensor for the detection of DNA sequences from the Escherichia coli pathogen

An electrochemical biosensor for the specific detection of short DNA sequences from the E. coli pathogen is described. This hybridization device relies on the immobilization of a 25-mer oligonucleotide probe, from the E. coli lacZ gene, onto a screen-printed carbon electrode. Chronopotentiometric detection of the Co(bpy)₃⁺³ indicator is used for monitoring the hybridization event. Numerous variables of the assay protocol, including those of the probe immobilization step, the hybridization event, and the indicator association/detection, are characterized and optimized. Hybridization times of 2- and 30-min are sufficient for detecting 300- and 50 ng/mL, respectively, of the E. coli DNA target. Applicability to analysis of untreated environmental water samples is illustrated. Such single-use electrochemical sensors hold great promise for decentralized environmental and food testing for the E. coli pathogen.     

水环境中有机污染物生化需氧量的测定

本文从理论和实践上讨论了水质监测中有机污染物生化需氧量(BOD)测定中的有关问题。其中包括BOD测定中发生的生化反应过程，好氧生化反应速率及速率常数，影响BOD测定结果的各种因素，BOD测定技术，以及BOD与COD、TOC的相关性。     

Using a process-centered approach to minimize the effort of compliance

 The complexity of different quality standards can, in principle, be covered by different approaches and strategies. In-depth process mapping of quality control (QC) work streams was used by the analytical laboratories of Lonza AG to show up the principle differences in being compliant to different quality systems. The results identified two main drivers for all necessary actions: process-related activities and infrastructure-related activities. In addition, a clear indication of the economic impact of these driving forces was gained, which led the laboratories to decide on a process-oriented approach. This approach has the advantage of being able to reflect the different demands of different quality assurance (QA) regulations within the same QC organizational structure. Following the process helps avoid unnecessary efforts in analytical work and represents a very economical approach, at the same time, providing high flexibility to react to different QA or customer demands. Received: 5 July 2002 Accepted: 12 November 2002 Acknowledgements The process-oriented approach resulted from many, very challenging discussions for which I would like to thank the staff of my organization (Analytics & QC), especially, the QA staff and the LIMS team. Presented at Analytica Conference, 23–26 April 2002, Munich, Germany Correspondence to B. Ciommer     

Use of CF3,Br/Al,discharges for reactive ion etching of III-V semiconductors

The reactive ion etching of GaAs, InP, InGaAs, and InAlAs in CF₃Br/Ar discharges was investigated as a function of both plasma power density (0.56-1.3 W - cm^–2) and total pressure (10-40 mTorr) The etch rate of GaAs in 19CF₃Br:1Ar discharges at 10 m Torr increases linearly with power density, from 600 Å min^–1 at 0.56 W · cm^–2, to 1550 Å · min at 1.3 W · cm^–2. The in-based materials show linear increases in etch rates only for power densities above – 1.0 W · cm^–2. These etch rates are comparable to those obtained with CCI₂F₂:O₂ mixtures under the same conditions. Smooth surface morphologies and vertical sidewalls are obtained over a wide range of plasma parameters. Reductions in the near-surface carrier concentration in n-type GaAs are evident for etching with power densities of >0.8 W cm^–2, due to the introduction of deep level trapping centers. At 1.3 W· cm^–2, the Schottky barrier height of TiPtAu contacts on GaAs is reduced from 0.74 to 0.53 eV as a result of this damage, and the photoluminescent intensity from the material is degraded. Alter RIE, we detect the presence of both F and Br on the surface of all of the semiconductors. This contamination is worse than with CCl₂F₂-based mixtures. High-power etching with CF₃Br/Ar together with Al-containing electrodes can lead to the presence of a substantial layer of aluminum oxide on the samples if the moisture content in the reactor is appreciable.     

Outer product analysis of electronic nose and visible spectra: application to the measurement of peach fruit characteristics

Visual aspect and aroma are among the most important features of fruit that determine consumer preferences. Electronic nose and spectroscopic techniques have shown positive results in evaluating some basic analytical parameters of fruit and global features such as the cultivar.In this paper, we illustrate and discuss a study aimed at evaluating the improvement derived by the fusion of visible spectra and electronic nose data. These experiments were performed on a population of yellow peaches belonging to two cultivars. Each sample was measured by visible optical spectroscopy and by electronic nose. In addition, a number of reference parameters were also measured by conventional destructive methodologies.Collected data were analysed individually and then fused together in order to classify the two cultivars and to estimate the reference parameters. Data fusion was performed building the outer product matrix for each measurement. The set of matrices was then successively unfolded and analysed by conventional chemometrics tools.Results were improved using outer products, for instance in classification average percentage errors of 25, 10, and 7 for electronic nose, spectra, and outer product, respectively was achieved. Regression analysis provides the evidence of a substantial orthogonal appearance of the datasets, which offer former hidden information on fruit classification.     

Investigation of the limitations of saturated fractional factorial experimental designs,with confounding effects for an HPLC ruggedness test

Summary Recently much attention has been directed to the validation of analytical methods. The level of validation will depend on the method application. If a method is developed for general use, for instance by different analysts, instruments or laboratories, then the effect of these changes need evaluation. This is normally referred to as ruggedness testing, where the limitations of the method to changes in the specified conditions are examined.This paper examines the use of Plackett-Burman fractional factorial experiment designs for ruggedness testing in high performance liquid chromatography (HPLC). The ability of these designs to identify confounding effects is applied to the stability indicating analysis of Salbutamol and its major degradation product, AH4045. The results show that confounding effects, proving extremely pertinent to HPLC, can be identified.The assay proved rugged to most tested changes although not to the use of column packing material from different manufacturers.     

Influence of Fe2O3 and V2O5 on Crystalline Structure of Mg-Al Spinel Synthesized by Waste Aluminum Slag

Mg-Al spinel is synthesized by using industrial waste-residue and basic magnesium carbonate in the aluminum factory as the main raw materials. The influence of V2O5 and Fe2O3 mineralizers on the structure, cell parameters and microscopic morphology of synthesized Mg-Al spinel has been discussed. The Mg-Al spinel is characterized by using XRD, SEM and relevant analytical software, such as Philips plus, Rietveld quantification and so on. The experimental results show that certain amounts of V2O5 and Fe2O3 are beneficial to the formation of Mg-Al spinel, and the optimum addition of V2O5 and Fe2O3 is respectively 2wt% and 3wt%. V2O5 has few effects on cell parameters of Mg-Al spinel; but Fe2O3 can form solid solution with Mg-Al spinel in which Mg-Fe spinel can also dissolve to form continuous solid solution. Therefore, with the increase of Fe2O3 content, the cell parameters of Mg-Al approximately present linear increase.     

激光通道传输热特性对远场光束质量的影响

 通过仿真计算分析了激光在光束控制系统通道内传输所产生的热效应及其对远场光束质量的影响。激光传播由近轴波方程描述，用快速傅里叶变换技术求解；激光热效应引起的流场密度变化采用完全Navier-Stokes方程计算。计算给出了不同波长、不同吸收系数条件下的远场光斑情况。计算结果表明，在典型的工作条件和状态下，较高能量激光在光束控制系统通道内产生的热效应影响不容忽视，它会明显降低远场目标处的能量集中度，增大光斑的发散。     

基于开关控制的兴趣实验设计

设计了开关控制实验,专门对常见的开关特点及使用进行探讨,根据开关特点搭建相应的控制电路,用近似于工程项目的形式锻炼学生对开关的灵活应用,激发了学生实验的兴趣和积极性.     

Simultaneous determination of eight components in Angelica sinensis based on UHPLC‐ESI‐MS/MS method for quality evaluation

A method employing ultra‐high performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) for determination of eight components including ferulic acid, senkyunolide A, butylphthalide, ligustilide, butylidenephalide, senkyunolide I, senkyunolide H and levistolide A in Angelica sinensis was established. The separation was carried out using a Waters ACQUITY UHPLC BEH C₁₈ column with gradient elution with 0.1% formic acid aqueous and acetonitrile at a flow rate of 0.4 mL/min. Good linearity was attained with R² of 0.9983–0.9998 in wide concentration ranges. The method had limit of detection (LOD) and quantitation (LOQ) in the range of 0.42–6.98 ng/mL and 1.39–23.28 ng/mL, respectively. Intra‐ and inter‐day precisions varied with relative standard deviations (RSDs) from 0.33% to 0.88% and 0.37% to 1.04%, respectively. Moreover, the average recoveries were in a satisfactory range of 92.7%–102.1% with RSDs of less than 3.60%. Finally, the method was successfully applied to analyze 19 batches of A. sinensis samples grown in Min County, Gansu province, China, as well as that collected in other regions. The findings indicated that the established method is reliable and may thus be applied as a powerful tool for qualitative and quantitative analysis of components in A. sinensis, which has its implications in quality control of A. sinensis.