Optical absorption of lithium metal vapor at high temperatures

Experimental results are reported for a unique spectroscopic device called the Plasma Spectroscopy Cell. Optical absorption of lithium metal vapor was observed at high density and temperature. Absorption spectra are analyzed using theoretical calculations of absorption cross sections for lithium-helium interactions, and singlet and triplet state transitions of diatomic lithium in the visible spectral range. This is believed to be the most complex example yet calculated in which absolute bound-bound, bound-free, free-bound, and free-free contributions for all possible optically allowed transitions are all included, in quite respectable agreement with experiment.     

A Numerical Calculation for Electron Impact Excitation of Copper

The scattering of electrons by atomic copper has been studied using Born approximation and the concept of the generalized oscillator strength (GOS). Differential and total cross-sections for the excitation of the 3d¹⁰ 4p² P state are calculated at incident energies of 100 eV and are compared with other available experimental and theoretical data. The agreement between our calculation for the differential cross-section and the available experimental results is fairly good at the forward angles, while the agreement at large angles is poor. The calculated total cross-sections are compared with the experimental data and those predicted by several theories. It is found that our calculation for the total cross-sections are in a good agreement with the close coupling calculation of Msezane and Henry (1986a, Physical Review A 33, 1631) for incident energies greater than 20 eV. The integrated cross-section measurements of Ismail and Teubner (1995, Journal of Physics B: Atomic, Molecular and Optical Physics 28, 4164) are in good agreement with the present calculation.     

肿瘤微波热疗的温度场预示及热损伤研究

本文将热损伤的产生和影响引入到肿瘤的微波热疗中。运用微波能量比吸收率SAR的分布分析了微波在组织中的传输和吸收过程,并对微波热疗过程中的温度场、热损伤分布以及血液灌注率的变化进行了数值模拟。     

神光Ⅱ上柱形黑腔辐射驱动冲击波

利用神光Ⅱ的八路三倍频激光装置，驱动柱形黑腔产生的x 射线作辐射源驱动台阶铝样品产生冲击波，获得了清晰的冲击波图像，通过冲击波过台阶样 品的时间差获得冲击波速度和压力分别为31.2km/s和17.5×10⁵MPa.采用软x射线能谱 仪通过激光注入孔测量的辐射温度与采用冲击波法测量辐射温度的结果一致. 关键词： 冲击波 辐射驱动 辐射温度     

遥感器CCD驱动器热设计及其在摄像过程中的温度变化

CCD驱动器是航天成像遥感器摄像过程中的主要热源之一。防止CCD驱动器过热是保证其正常工作的重要方面。介绍了遥感器的工作模式和对CCD驱动器采取的热控制措施。通过热平衡试验,利用回归的方法,对CCD驱动器在摄像过程中的温度变化规律进行了分析,同时对热控制效果进行了评估。CCD驱动器工作时升温速率在0.85℃/min左右,整个摄像过程中最高温度约为26℃,所实施的热控制措施效果理想。     

利用相干渡越辐射测量电子束团长度的分析与计算

利用相干渡越辐射(CTR)测量短和超短电子束团长度是国际上束测领域新发展的频域测量技术.文中理论分析和数值计算了北京自由电子激光装置的皮秒级的射频电子束团序列产生的CTR,当辐射波长在长于束长(4ps)时,渡越辐射发生相干增强效应;与非相干渡越辐射相比,当λ≥2πσz时,增强的倍数约等于束团中粒子的数目(10⁸);CTR从亚毫米波到毫米波段呈宽带连续谱特性;渡越辐射能量主要集中在轴线附近,宏脉冲辐射能量高达几毫焦.设计采用偏振型束团长度测量系统,利用CTR自相关技术,实验测量该束团序列的纵向长度,并藉助傅里叶变换光谱法,推求束团电子分布.     

双核系统核子转移驱动势与复合核的最佳激发能

计算了以208Pb为靶的一系列重离子熔合反应双核系统核子转移驱动势.它制约由输运方程所支配的核子转移速率,因而确定了双核系统形成复合核的几率.并由此可确定形成复合核所必须的最低激发能,即形成最稳定复合核的最佳激发能,得到了与已知实验值基本符合的结果. Particle transfer driven potentials in Di nuclear System (DNS) in heavy ion collisions based on 208Pb target are calculated. The driven potential controls the particle transfer velocity in the process governed by the diffusion equation, and as a consequence determines the compound nuclear formation probability of DNS. The minimum excitation energy to form a compound nucleus, which is the optimum excitation energy to form the most stable compound nucleus, has been calculated, and the results are basica...     

Effects of laser intensity on the emission direction of fast electrons in laser-solid interactions

The dependence of emission direction of fast electrons on the laser intensity has been investigated. The experimental results show that, at nonrelativistic laser intensities, the emission of fast electrons is mainly in the polarization plane. With the increase of the laser intensity, fast electrons emit towards the laser propagation direction from laser polarization direction. At relativistic laser intensities, fast electrons move away from the laser polarization plane, closely to the reflection direction of the incident laser beam.     

2MeV注入器脉冲电子束时间分辨能谱诊断研究

 介绍了利用磁分析器和电子束产生的契伦科夫辐射光诊断直线感应加速器脉冲电子束时间分辨能谱的原理、方法及诊断系统，对中物院2MeV感应叠加型注入器的2kA强流脉冲电子束时间分辨能谱进行实验诊断，并与二极管电压进行对比分析。测得能量约2.2MeV，60ns内最大能量变化为4%。     

Si微电阻桥温度分布与热传导特性的显微Raman光谱研究

采用显微Raman光谱方法对红外目标模拟器中重掺杂Si微电阻桥单元的热传导特性进行研究，根据Si桥的实际特性建立相应的Raman散射模型，通过测量Raman峰位的移动得到高功率激光辐照下测量点的温度.对Si桥桥面分别进行了沿某些特殊线段的逐点线扫描和覆盖全部桥面的面扫描，得到各点的温升及其分布.用基于有限元分析的软件结合Si桥结构参数对各测量点的温升进行了模拟计算，其结果在热导分布的基本趋势上与实验相一致.实验细致地揭示了热导分布的局域起伏，反映出实际器件的不均匀性，为改进器件设计、优化器件性能提供了实验依据. 关键词： Raman光谱 Si桥 温度分布 热导