Photoluminescence of green nanophosphors Sr2MgSi2O7 doped with Tb3+ under 374-nm excitation

A series of Sr₂MgSi₂O₇:Tb³⁺ nanophosphors is prepared using a high-temperature solid-state reaction. The x-ray diffraction patterns show that the crystal structure of the sample is not significantly affected by Tb³⁺ ions. However, the images of the scanning electron microscope illustrate that the average size of nanoparticles becomes larger with the increase of Tb³⁺ concentration. Unlike earlier investigations on down-conversion emission of Tb³⁺ ion excited by deep ultraviolet light, in this work, the photoluminescence characteristics of Sr₂MgSi₂O₇ nanophosphors doped with different Tb³⁺ concentrations are analyzed under 374-nm excitations. The intense green emission at 545 nm is observed at an optimal doping concentration of 1.6 mol%. The main reason for the concentration quenching is due to the electric dipole-electric dipole interaction among Tb³⁺ ions.     

Ultrasonically assisted synthesis of barium stannate incorporated graphitic carbon nitride nanocomposite and its analytical performance in electrochemical sensing of 4-nitrophenol

We describe the ultrasonic assisted preparation of barium stannate-graphitic carbon nitride nanocomposite (BSO-gCN) by a simple method and its application in electrochemical detection of 4-nitrophenol via electro-oxidation. A bath type ultrasonic cleaner with ultrasonic power and ultrasonic frequency of 100 W and 50 Hz, respectively, was used for the synthesis of BSO-gCN nanocomposite material. The prepared BSO-gCN nanocomposite was characterized by employing several spectroscopic and microscopic techniques such as X-ray diffraction, X-ray photoelectron spectroscopy, fourier transform infra-red, field emission scanning electron microscopy, and high resolution transmission electron microscopy, to unravel the structural and electronic features of the prepared nanocomposite. The BSO-gCN was drop-casted on a pre-treated glassy carbon electrode (GCE), and their sensor electrode was utilized for electrochemical sensing of 4-nitrophenol (4-NP). The BSO-gCN modified GCE exhibited better electrochemical sensing behavior than the bare GCE and other investigated electrodes. The electroanalytical parameters such as charge transfer coefficient (α = 0.5), the rate constant for electron transfer (k_s = 1.16 s⁻¹) and number of electron transferred were calculated. Linear sweep voltammetry (LSV) exhibited increase in peak current linearly with 4-NP concentration in the range between 1.6 and 50 μM. The lowest detection limit (LoD) was calculated to be 1 μM and sensitivity of 0.81 μA μM⁻¹ cm⁻²_. A 100-fold excess of various ions, such as Ca²⁺, Na⁺, K⁺, Cl⁻, I⁻, CO₃²⁻, NO₃, NH₄⁺ and SO₄²⁻ did not able to interfere with the determination of 4-NP and high sensitivity for detecting 4-NP in real samples was achieved. This newly developed BSO-gCN could be a potential candidate for electrochemical sensor applications.     

Electric field assisted oxygen removal from the basal plane of the graphitic material

We provide a novel strategy to eliminate the epoxy group from the basal plane of graphene platelets. Given that the current reduction methods are unsatisfactory to clean the epoxides or sometimes cause undesirable structure deformations, the proposed strategy restores the original hexagonal carbon network without creating other new defects. To the best of our knowledge, the electric field mediated graphene oxide (GO) reduction has not yet been systematically investigated. The capability would permit the improvement of existing GO reduction methods and assist in the fabrication of high‐quality graphitic materials. © 2012 Wiley Periodicals, Inc.     

Detection of Photoemission of Electrons into Anthracene Crystals by Studying Recom ination Radiation

Evidence for photoemission of electrons from a calcium contact into anthracene crystals is presented. It is based on the observation of recombination radiation resulting from mutual annihilation of photoinjected electrons with holes which are supplied by an ohmic counter-electrode. The method avoids spurious effect's due to optical release of trapped electrons. The problem of photoemission of electrons from alkali-metals into anthracene crystals is discussed.     

Dependence of electronic and optical properties of multilayer SiC and GeC on stacking sequence and external electric field

The electronic and optical properties of different stacked multilayer SiC and GeC are investigated with and without external electric field (EEF). The band gaps of multilayer SiC and GeC are found smaller than that of monolayer SiC and GeC due to the interlayer coupling effect. When EEF is applied, the direct band gaps (ΔK–M) of multilayer SiC and direct band gaps (ΔK–K) of multilayer GeC all turn to indirect band gaps (ΔK–G) as the band at the G point drops dramatically toward zero. The imaginary part ε₂(ω)s of multilayer SiC and GeC show that new absorption peaks between 2–5 eV appear when the polarized direction is perpendicular to the layer plane, and new absorption peaks in infrared region appear as the EEF is higher than a certain point when the polarized direction is parallel to the layer plane. Our calculations reveal that different stacking sequences and EEF can provide a wide tunable band structures and optical properties for multilayer SiC and GeC.     

The stabilization of partially-premixed jet flames in the presence of high potential electric fields

Numerous research efforts have focused on flame stabilization and emissions. Based on initial experiments, specific mechanisms resulting from DC electric fields were chosen to be investigated, namely the chemical, thermal, and ionization mechanisms. Numerical simulations were performed on premixed propane-ozone-air flames to characterize ozone effects on flame speed resulting from the formation of ozone in high potential electric fields. These results were compared against partially premixed flame experiments to observe the dominant influences within leading edge stabilization within high potential electric fields. It was found that the electromagnetic or ionization influences, serve as the dominant effect on the combustion zone.     

A New Simple Voltammetric Method for Thiourea and Thiourea Dioxide Determinations

Abstract

Linear sweep voltammetry at glassy carbon or other carbon materials is shown to be a simple, highly sensitive, and relatively versatile analytical method for the determination of thiourea and thiourea dioxide. Using the first one-electron oxidation peak occurring at ～0.6V, thiourea can be determined directly in a variety of electrolytes from concentrated acids to solutions of pH ～5. The thiourea dioxide determination is based on the two-electron oxidation peak which appears in a number of electrolytes at ～1.2V.     

外电场对2-氟-5-溴吡啶分子结构与电子光谱影响的研究

采用密度泛函B3LYP方法，在6-311++g(3df,3pd)基组水平上优化了不同外电场下2-氟-5-溴吡啶分子的基态稳定构型、电偶极矩和分子的总能量，在此基础上利用杂化CIS方法研究了外电场下2-氟-5-溴吡啶分子的前9个激发态的激发能、波长和振子强度受外电场的影响规律。结果表明：5C-9Br和3C-10F间键长受到X轴向外场影响最大，随着外电场的继续增加，可能最先趋于断裂；在外电场F=-0.005a.u.时总能量达到最大，而偶极矩达到最小；LUMO能级受外场影响较大，HOMO能级受外电场影响较小；激发波长、振子强度也受外电场影响，但随电场变化比较复杂。     

Selectivity of seismic electric signal (SES) of the 2000 Izu earthquake swarm: a 3D FEM numerical simulation model

Although seismic electric signal (SES) has been used for short-term prediction of earthquakes, selectivity of SES still remains as one of the mysterious features. As a case study, we made a numerical simulation based on a 3D finite element method (FEM) on the selectivity of SES observed in the case of the 2000 Izu earthquake swarm. Our numerical results indicated that the existence of conductive channel under Niijima island could explain the reported SES selectivity.