Self-aligned imaging system using phase conjugate readout from elementary holographic grating

We propose a self-aligned imaging system (SAIS) using phase conjugate readout from an elementary holographic grating. The SAIS provides a huge amount of interconnections between a lot of points on two corresponding imaging planes without troublesome mechanical alignment. In the SAIS, a hologram for one-to-one interconnection is used for many-to-many interconnections. In addition, the SAIS has the capability of correcting aberration. Preliminary experiments verify the principle and the capability of the SAIS.     

Asymptotic properties of constrained Markov Decision Processes

We present in this paper several asymptotic properties of constrained Markov Decision Processes (MDPs) with a countable state space. We treat both the discounted and the expected average cost, with unbounded cost. We are interested in (1) the convergence of finite horizon MDPs to the infinite horizon MDP, (2) convergence of MDPs with a truncated state space to the problem with infinite state space, (3) convergence of MDPs as the discount factor goes to a limit. In all these cases we establish the convergence of optimal values and policies. Moreover, based on the optimal policy for the limiting problem, we construct policies which are almost optimal for the other (approximating) problems. Based on the convergence of MDPs with a truncated state space to the problem with infinite state space, we show that an optimal stationary policy exists such that the number of randomisations it uses is less or equal to the number of constraints plus one. We finally apply the results to a dynamic scheduling problem.This work was partially supported by the Chateaubriand fellowship from the French embassy in Israel and by the European Grant BRA-QMIPS of CEC DG XIII     

钢卷尺刻度在线测量系

本文介绍了一种钢卷尺刻度在线测量系统 ,它采用了高速摄像及计算机数据处理技术 ,文章阐述了系统的非接触动态测量原理 ,描述了光电信号的处理方法 .     

Viscoelasticity and birefringence of polyisoprene

The complex Young's modulus, E^*(ω), and the complex strain-optical coefficient, O^*(ω), which is the ratio of the birefringence to the strain, were measured for polyisoprene (PIP) over a frequency range of 1 ～ 130 Hz and a temperature range of 22 ～ ?100°C. The imaginary part of O^*, O″, was positive at low frequencies and negative at high frequencies. The real part, O′, was always positive and showed a maximum. The complicated behavior of O^* could be understood by the assumption that E^* = E_R^* + E_G^* and O^* = C_RE_R^* + C_GE_G^*, where E_R^* and E_G^* were complex quantities and C_R and C_G were constants. The C_R value, equal to the ordinary stress-optical coefficient measured in the rubbery plateau zone, was 2.0 × 10^?9 Pa^?1. The C_G value, defined as the ratio O″/E″ in the glassy zone, was ?1.1 × 10^?11 Pa^?1. The E_G^*, which was the major component of E^* in the glassy zone, showed almost the same frequency dependence as that of polystyrene and polycarbonate. The E_R^*, which was dominant in the rubbery zone, was described well by the bead-spring theory. The temperature dependence of the E_G^* was stronger than that of the E_R^*. This difference caused the breakdown of the thermorheological simplicity for E^* and O^* around the glass-to-rubber transition zone. © 1995 John Wiley & Sons, Inc.     

对薄层柱壳爆炸膨胀断裂过程的研究

 本文提出了一个用于描述动态破坏发展过程的损伤度函数。从这个损伤度函数出发,把材料特征性方程取为强化粘塑性本构方程形式,导出了薄层柱壳爆炸膨胀运动在两种近似下（恒定膨胀速度近似合恒定应变速率近似）断裂判据的解析表达式。结果分析表明,在上述条件下,存在着一个动态断裂“塑性峰”,在这个峰值条件的应变率下,柱壳出现贯穿断裂时刻的应变最大。以软钢为算例,本断裂判据可以比较好地解释Иванов和陈大年等给出的实验结果。这时,动态断裂“塑性峰”对应的应变率为4×10⁴ s^-1,相应的应变约为60%~80%。     

Experimental investigation on large deflection response of a frame impacted by a moving body

This paper reports on the experimental investigation of the dynamic large deflection response of a portal frame impacted at its midspan by a body moving at a certain speed. Both the deflection and velocity vs. time curves of the midspan and the dynamic history of a number of desired locations were recorded during the process of response. On the basis of the test data, the momentum and kinetic energy conversion between the frame and the moving body in the impact process are realized, and the occurrence and expansion of plastic regions are described. Investigation results show that the initial collision is approximately ideally inelastic, and that the elastic deformation plays a considerable role in the response though the input energy is much larger than the maximum elastic energy capacity of the beam member; therefore, in a general impact, the energy ratio should not be regarded as a sufficient criterion for a rigid—plastic solution. The ratios of the impulse transferred to and the energy absorbed by the frame in the initial collision to that carried by the moving body before impact is only related to the ratiobetween the equivalent mass of the frame paticipating in the initial collision and the mass of the impacting body, having nothing to do with the impacting velocity to a certain extent.     

Computer simulation of some dynamical properties of the Lorentz gas

We carried out molecular dynamics simulations of a Lorentz gas, consisting of a lone hydrogen molecule moving in a sea of stationary argon atoms. A Lennard-Jones form was assumed for the H₂-Ar potential. The calculations were performed at a reduced temperatureK ^* =kT/_{H 2–Ar} = 4.64 and at reduced densities ^*= _{Ar Ar} ³ in the range 0.074–0.414. The placement of Ar atoms was assumed to be random rather than dictated by equilibrium considerations. We followed the trajectories of many H₂ molecules, each of which is assigned in turn a velocity given by the Maxwell-Boltzmann distribution at the temperature of the simulation. Solving the equations of motion classically, we obtained the translational part of the incoherent dynamic structure factor for the H₂ molecule,S _tr(q, ). This was convoluted with the rotational structure factorS _rot(q, ) calculated assuming unhindered rotation to obtain the total structure factorS(q, ). Our results agree well with experimental data on this function obtained by Egelstaffet al. At the highest density ( ^*=0.414) we studied the dependence ofS(q, ) on system size (number of Ar atoms), number of H₂ molecules for which trajectories are generated, and the length of time over which these trajectories are followed.     

PHASE INVERSION AND ITS MECHANICAL MODEL STUDIES FOR THE TWO-PHASE POLYMER BLEND SYSTEMS (Ⅱ)——DYNAMIC VISCOELASTIC RESPONSE

The dynamic viscoelastic response of the two-phase polymer blend systems shows the characteristics of the thermorheologically complex materials. In this paper theoretical equations for describing the dynamic viscoelastic response of such polymer blend systems have been established by means of the mechanical modeling technique. The dynamic viscoelastic response of the blend systems at any blend composition can be predicted theoretically by using the equations established, provided that the dynamic viscoelastic response of the two pure components and the mechanical model parameters are known in advance. Thus, we provide an effective method for studying the dynamic mechanical properties and the molecular relaxation characteristics of the two-phase polymer blend systems.     

Age related changes in the thermal transition of Turkey leg flexor tendon collagen

A differential scanning calorimetric, thermogravimetric and electron microscopic investigation has been carried out on the uncalcified areas of turkey leg flexor tendon as a function of age. Rehydrated samples exhibit an increase of thermal stability with age. The H_D values drop from about 11 cal·g^–1 in the first weeks of life down to 7 cal·g^–1 after the 11th week.At about 11 weeks, the collagen fibril diameter distribution passes from unimodal to multimodal. The DSC curves as well as the TG-DTG curves recorded from dried samples do not show any appreciable difference with ageing. The variations in thermal behaviour of rehydrated samples and fibril diameter distribution could be related to modifications in water binding with ageing.The Authors are grateful to Dr. G. Fabris for discussion and help in the selection of the samples. They also wish to thank Mr. G. Pizzuto for excellent technical assistance. The financial support by Consiglio Nazionale delle Ricerche is gratefully acknowledged.     

Surface forces in foam films from ABA block copolymer: a dynamic method study

The thinning of foam films from aqueous solutions of an ABA triblock copolymer of polyethylene oxide and polypropylene oxide (average molecular weight 14,000 g/mol) is studied experimentally. The dependence of the surface forces on film thickness is obtained by the dynamic method of Scheludko and Exerowa.The total surface force measured in foam films (radius 60–70 m) from 10^–5 M (0.014 wt%) polymer solution with 0.1 M NaCl is positive at thicknesses from about 800 down to 460 . The electrostatic repulsion is negligible while the contribution of van der Waals attraction is small (within 15%). Therefore a positive surface force component predominates. Most probably it arises from steric interactions between the hydrophilic polyethylene oxide tails of the polymer. The dynamic method appears to be a suitable technique for exploring the stabilization of foam films from ABA copolymers.