Novel Catalytic Dielectric Barrier Discharge Reactor for Gas-Phase Abatement of Isopropanol

Catalytic gas-phase abatement of air containing 250 ppm of isopropanol (IPA) was carried out with a novel dielectric barrier discharge (DBD) reactor with the inner catalytic electrode made of sintered metal fibers (SMF). The optimization of the reactor performance was carried out by varying the voltage from 12.5 to 22.5 kV and the frequency in the range 200–275 Hz. The performance was significantly improved by modifying SMF with Mn and Co oxide. Under the experimental conditions used, the MnO _x /SMF showed a higher activity towards total oxidation of IPA as compared to CoO _x /SMF and SMF electrodes. The complete destruction of 250 ppm of IPA was attained with a specific input energy of ∼235 J/L using the MnO _x /SMF catalytic electrode, whereas, the total oxidation was achieved at 760 J/L. The better performance of the MnO _x /SMF compared to other catalytic electrodes suggests the formation of short-lived active species on its surface by the in-situ decomposition of ozone.     

On‐Line Determination of Arsenic Species in Sea Water by Selective Hydride Generation Coupled with Inductively Coupled Plasma — Mass Spectrometry

A method for direct de termination of total in organic arsenic (III+V), arsenic (III) and dimethylarsinate (DMA) in sea water was developed by combining continuous‐flow selective hydride generation and inductively coupled plasma mass spectrometry (ICP‐MS) is presented. The principle underlying selective hydride generation is based on proper control of the reaction conditions for achieving separation of the respective arsenic species. The effects of pH and composition of reaction media on mutual interference between the arsenic species were investigated in detail. The results indicate that the appropriate media for the selective determination of total in organic arsenic, DMA and As(III) are 6 M HNO₃, acetate buffer at pH = 4.63 and citrate buffer at pH = 6.54, respectively. The concentrations of total inorganic arsenic species, As(III+V), and As(III) were respectively deter mined and that of As(V) was obtained by the difference between them. As to the concentration of DMA, it was obtained after correction from the interference caused by As(III) and As(V). By following the established procedure, the detection lim its (as based on 3‐sigma criterion) for As(III+V), As(III) and DMA were 0.050, 0.009, and 0.002 ng/mL, respectively. There liability of the pro posed method was evaluated in terms of precision and spike addition. The results indicated that the precision of better than 3% and spike recovery of 95 to 105% for all the arsenic species tested in the natural sea water samples can be obtained.     

苯硫酚等离子体聚会及其结构与性能

应用外部电容耦合式等离子体聚合装置．研究了苯硫酚等离子体聚合规律，找到了最佳聚合条件，通过热失重、红外光谱、X－射线衍射、电子衍射、GC－MS和接触角测定等研究了聚合物结构与性能。电导率测定表明等离子体聚苯硫酚具有半导体性质。     

Experimental and Theoretical Studies of a Pulsed Microwave Excited Ar/CF4 Plasma

The present work deals with a pulsed microwave discharge in an Ar/CF ₄ gas mixture under a low pressure (1–10 mbar). The discharge chamber developed has a cylindrical geometry with a coupling window alternatively made of quartz or alumina. The setup allows one to investigate the plasma–wall interactions (here etching of the quartz window) and the ignition process of the pulsed microwave plasma. Microwave pulses with a duration of 50–200 s and repetition rate between 1 and 10 kHz are typical for the experiments. The space-time behavior of the fluorine number density in the discharge has been investigated experimentally by optical actinometry. The discharge kinetics is modeled using electron-transport parameters and rate coefficients derived from solutions of the Boltzmann equation. Together with the solution of the continuity and electron balance equations and the rate equations describing the production of CF _x (x=2, 3, 4) radicals and F atoms, a good agreement between experimental and theoretical data can be achieved.     

Anode Magnetron Enhanced DC Glow Discharge Processes for Plasma Surface Cleaning and Polymerization

The objective of this study was to examine some fundamental factors involved in the design and construction of the anode magnetron dc glow discharge processes as well as its performance in plasma cleaning and polymerization. Those advantages of anode magnetron include the capability of the magnetron to operate at low pressure, as well as decreasing the thickness of cathode dark space, i.e., the negative glow which contains a higher concentration of ions and active species was more closely to the cathode surface, which makes the plasma surface cleaning and polymerization an effective and uniform processes. The deposition rate at a given discharge power is increased by the presence of anode magnetrons, and is also much higher relative to rf and af. The refractive index of dc plasma film at a given polymer thickness (such as TMS, 70 nm, RI: 2.4) is higher than rf, af, and cascade arc plasma (RI: 1.6–1.7).     

Polarization of coherent synchrotron radiation from an electron beam rotating in a plasma

After eliminating reflections from the walls of the plasma container, we observed polarization of the coherent synchrotron radiation from a relativistic electron beam rotating in a plasma. Several features of the polarization agree well with calculations based on the single particle synchrotron radiation theory. A particular polarization ratio (Fig. 3) does not, however. We deduce from this direct diffraction of the radiation by the beam electrons. This is strong evidence for beam-particle bunches of size cm. Also, there must be some absorption of the extraordinary wave to account for the observations. We suggest a way to apply these results to measure the pitch angle of the beam.Work supported by Army Research Office.     

Rate Coefficient for Self-Association Reaction of CF2 Radicals Determined in the Afterglowof Low-Pressure C4F8 Plasmas

We have analyzed decay kinetics of CF₂ radicals in the afterglow of low-pressure, high-density C₄F₈ plasmas. The decay curve of CF₂ density has been approximated by the combination of first- and second-order kinetics. The surface loss probability evaluated from the frequency of the first-order decay process has been on the order of 10^–4. This small surface loss probability has enabled us to observe the second-order decay process. The mechanism of the second-order decay is self-association reaction between CF₂ radicals (CF₂+CF₂C₂F₄). The rate coefficient for this reaction has been evaluated as (2.6–5.3)×10^–14 cm³/s under gas pressures of 2 to 100 mTorr. The rate coefficient was found to be almost independent of the gas pressure and has been in close agreement with known values, which are determined in high gas pressures above 1 Torr.     

On the ν-dimensional one-component classical plasma: The thermodynamic limit problem revisited

We prove theH-stability property and the existence of the thermodynamic limit of the free energy density of the two-dimensional, one-component classical plasma. We give lower and upper bounds on the free energy density in any dimensionv and draw some consequences.     

一维等离子体光子晶体的带隙研究

采用时域有限差分方法(FDTD),结合等离子体计算中的分段线性电流密度卷积技术(PLJERC)对一维等离子体光子晶体(1D-PPC)进行了数值模拟,给出了微分高斯脉冲在一维等离子体光子晶体中的传播过程。计算得到的带隙结构与K-P模型方法的结果一致。计算并分析了等离子体频率、介质介电常数、等离子体-介质层的厚度比以及周期厚度对一维等离子体光子晶体带隙结构的影响。     

基于化学计量学结合ICP-MS的党参道地性的研究及安全评价

微量元素与中药的功效和安全性密切相关,也是药材道地性研究的一部分,为探讨党参中重金属元素的安全性、风险性及道地性的相关性。本文采用电感耦合等离子体质谱法（ICP-MS）及原子荧光光谱法(AFS)测定来源于甘肃、山西、湖北、四川等产区的39批党参药材中的20种元素的含量,结果结合化学计量学分析对党参产区进行差异判别。通过单因子污染指数法和内梅罗综合污染指数法对其进行安全性评价,通过健康风险基于暴露量、危害指数法和暴露限值法对其进行风险评估。结果表明,重金属在各自范围内线性关系良好,加样回收率,仪器精密度和重复性良好,其中 Ba、Sr、Mn的含量最高。主成分分析显示39批药材分为三类,同一产区的党参能较好的聚在一起,元素含量差异与产区分布有一定规律,其中Cs、Ga、As、Co、Li、Pb、Hg、Se、V、Mn为关键的差异标志物,为产地元素特征分析鉴别提供依据。安全评价结果为39批党参药材污染等级为安全,但风险评估后DS-31、DS-32、DS-34、DS-36及 DS-37在人体长期蓄积中具有健康风险。结论：本研究方法高效、准确、简便,结合化学计量学可以对党参进行有效的产地判别,评价党参中元素的安全性及风险性,为党参道地性及健康评价提供了科学依据。