Propagating transverse electric and transverse magnetic modes in liquid crystal-clad planar waveguides

ABSTRACT

In a planar dielectric waveguide, weak confinement of a propagating mode in a high index core leads to a measurable evanescent interaction with the cladding. In this work, we study the effect of a reorientable anisotropic cladding on the behaviour of Transverse Electric (TE) and Transverse Magnetic (TM) mode polarisations using a liquid crystal (LC)-clad waveguide architecture. The polarised evanescent field of a guided mode interacts with a voltage-tunable birefringent LC cladding to deflect an out-coupled beam. Experimental measurements are coupled with a theoretical framework and show good consistency with simulation results. We isolate the effect of mode confinement by changing the thickness of the high index core. Interactions between the LC index ellipsoid and the mode polarisation are probed by changing the initial alignment of the LC. Finally, we examine the difference in deflection between TE and TM modes, which incorporates both a change in mode confinement and a difference in LC index components.     

Approaching supramolecular functionality

Functional molecules require a high degree of complexity which is difficult to achieve by covalent synthesis. This article discusses supramolecular approaches to the creation of larger architectures through noncovalent bonds, self-assembly, and template strategies. It highlights selected examples for the structural and conformational control of function and attempts to identify difficulties and challenges which may arise in future.     

巯基卟啉自组装膜的制备及应用研究进展

详细介绍了巯基卟啉自组装膜的几种制备方法,评述了不同制备方法的优缺点;对卟啉自组装膜在电荷转移、分子氧电催化、分子光电器件等领域的研究进展进行了评述,引用文献54篇。     

卟啉超分子化合物在分子器件中的应用

分子电子器件已成为近年来的一个研究热点，卟啉类化合物因为光敏性好、性能稳定、易于修饰等优点成为分子器件研究的理想模型化合物。本文着重介绍了它在分子器件中的最新应用进展。     

Synthesis and characterization of a bifunctional amido-thiophene monomer and its copolymer with thiophene and electrochemical properties

A bifunctional amido-thiophene namely hexamethylene (bis-3-thiophene acetamide) (HMTA) was synthesized by the reaction of 3-thiophene acetic acid with hexamethylene diamine. Copolymerization in the presence of thiophene was achieved electrochemically in tetrabutylammonium tetrafluoroborate/acetonitrile (TBAFB/AN). Spectroelectrochemical analysis of the resulting copolymer [P(HMTA-co-Th)] reflected electronic transitions at 505 nm, 740 nm and ∼1000 nm, revealing π to π* transition, polaron and bipolaron band formation respectively. Switching ability was evaluated by a kinetic study via measuring the transmittance (%T) at the maximum contrast. Dual type polymer electrochromic devices (ECDs) based on P(HMTA-co-Th) and poly(ethylene dioxythiophene) (PEDOT) have been constructed. Spectroelectrochemistry, switching ability and stability of the devices were investigated by UV-vis spectroscopy and cyclic voltammetry. These devices exhibit low switching voltages (between 0.0 V and +1.6 V), short switching times with reasonable switching stability under atmospheric conditions.     

Progress in the realisation of an autonomous environmental monitoring device for ammonia

Progress in the development of a micro-fluidic system for colorimetric monitoring of ammonia in drinking and wastewater is described. The ultimate goal is to have a miniaturised instrument that can produce accurate, reliable measurements, is easy to operate, has minimal power consumption, and can operate autonomously for a year. In this study, the indophenol reaction is incorporated into a simple, reliable analytical micro-fluidic system. Absorbance measurements for the blue ammonia-indophenol complex formed in the micro-fluidic system are shown. A key issue is the limiting stability of hypochlorite, a reagent used in the assay. The effects of hypochlorite concentration and impurities on the stability of hypochlorite are investigated and discussed. Decomposition is shown to be very dependent on the presence of heavy-metal impurities. With low levels of these catalytic metals and careful storage, hypochlorite has been shown to be stable for over a year.     

Multistate/multifunctional behaviour of 4'-hydroxy-6-nitroflavylium: a write-lock/read/unlock/enable-erase/erase cycle driven by light and pH stimulation

We have investigated the network of reactions observed for the photochromic 4'-hydroxy-6-nitroflavylium compound in aqueous solutions upon pH changes (including pH jump and stopped flow experiments) and light excitation. The changes observed in the NMR and UV/Vis spectra allowed identification of ten different forms in which this compound can be transformed depending on the experimental conditions. Equilibrium and kinetic constants have been determined. Compared with other members of the flavylium family, 4'-hydroxy-6-nitroflavylium is characterized by a large cis-->trans isomerization barrier, and a very efficient hydration reaction. These peculiar features allow writing, reading, storing and erasing photonic information on 4'-hydroxy-6-nitroflavylium by a novel cyclic process that involves the following steps: write-lock/read/unlock/enable-erase/erase.     

偶氮苯光致异构化对紫精-曙洪络合的调控

报导了α，ω－偶氮苯，紫精双发色团化合物的合成与性质研究，结果表明偶氮苯的光致顺反异构化以可调控与之相连的紫精与曙红络合行为，其作用程度的强弱与连接两者的亚甲基链的长度有关，借助ＨＮＭＲ通过对构象进行分析解释了上述的研究结果。     

Photoinduced processes within compact dyads based on triphenylpyridinium-functionalized bipyridyl complexes of ruthenium(II)

As an alternative to conventional charge-separation functional molecular models based on long-range ET within redox cascades, a "compact approach" has been examined. To this end, spacer elements usually inserted between main redox-active units within polyad systems have been removed, allowing extended rigidity but at the expense of enhanced intercomponent electronic communication. The molecular assemblies investigated here are of the P-(theta (1))-A type, where the theta (1) twist angle is related to the degree of conjugation between the photosensitizer (P, of {Ru(bpy)(3)}(2+) type) and the electron-acceptor (A). 4-N- and 4-N-,4'-N-(2,4,6-triphenylpyridinio)-2,2'-bipyridine ligands (A(1)-bpy and A(2)-bpy, respectively) have been synthesized to give complexes with Ru(II), 1-bpy and 2-bpy, respectively. Combined solid-state analysis (X-ray crystallography), solution studies ((1)H NMR, cyclic voltammetry) and computational structural optimization allowed verifying that theta (1) angle approaches 90 degrees within 1-bpy and 2-bpy in solution. Also, anticipated existence of strong intercomponent electronic coupling has been confirmed by investigating electronic absorption properties and electrochemical behavior of the compounds. The capability of 1-bpy and 2-bpy to undergo PET process was evaluated by carrying out their photophysical study (steady state emission and time-resolved spectroscopy at both 293 and 77 K). The conformational dependence of photoinduced processes within P-(theta (1))-A systems has been established by comparing the photophysical properties of 1-bpy (and 2-bpy) with those of an affiliated species reported in the literature, 1-phen. A complementary theoretical analysis (DFT) of the change of spin density distribution within model [1-bpy(theta (1))](-) mono-reduced species as a function of theta (1) has been undertaken and the possibility of conformationally switching emission properties of P was derived.     

Monolayer Rectifiers

Molecular-scale electronics has now been enriched by the discovery that molecules, studied singly by scanning tunneling spectroscopy, or a large array of those molecules, studied in parallel as a Langmuir-Blodgett monolayer between metal electrodes, exhibit rectification, i.e., an asymmetric current as a function of applied voltage.This asymmetry can come, first, from work function differences between two dissimilar metals or the metal-molecule interfaces (Schottky barriers), second from an asymmetric placement of the chromophore between the two metal electrodes, and third, from an asymmetry of the molecular orbitals of the molecule.This third, electronic origin of rectification, first proposed by Aviram and Ratner in 1974, and confirmed in the work reported here, gives us hope that, not too many years from now, molecules can form the basis of ultra-small yet ultra-fast electronic devices and integrated circuits.