Nickel cluster structure determined from the adsorption of molecular nitrogen: Ni49-Ni71

The geometrical structures of nickel clusters in the size range from 49 to 71 atoms are studied by the chemical probe method. Saturation coverages of molecular nitrogen are determined for each cluster and from this data specific structures are proposed (except for Ni₆₆ and Ni₆₇). The results indicate that icosahedral packing is the dominant structural configuration throughout this size range, in agreement with earlier results based on water and ammonia adsorption. In addition, it seems that for clusters larger than Ni₅₄ the excessive strain in the surface of the 55-atom regular icosahedron often leads to rear-rangements of the surface atoms to relieve that strain. Ni₅₅, in particular, is found to have two isomers, the regular icosahedron and a structure in which a single apex atom is displaced to the center of an opposite face. Ni₇₁ occurs as a 55-atom regular icosahedron with a 16-atom cap. The results suggest that the atoms in the cap adopt an ABA configuration relative to the underlying icosahedron rather than an icosahedral arrangement. For some clusters the saturation with nitrogen causes a small degree of surface reconstruction that leads to the adsorption of additional nitrogen molecules.Work supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, under Contract No. W-31-109-Eng-38     

Multiple Bonds between Transition Metals and “Bare” Main Group Elements: Links between Inorganic Solid State Chemistry and Organometallic Chemistry

The last two decades have seen a dramatic development in the study of metal-metal multiple bonds, particular successes being recorded in the field of organometallic chemistry. Syntheses designed to produce novel transition metal complexes with single, double, triple and quadruple metal-metal bonds occupy a most important place in such research, as also do reactivity studies. A striving to establish general principles has provided much of the motivation for such work, but one less obvious goal—the commercial application of the catalytic properties of metal-metal multiple bonding systems, in the medium and long term—should not be overlooked. All aspects of the investigations of metal-metal multiple bonds also apply to a particular class of compound that has, however, enjoyed little lime-light and thus deserves the present review: complexes with multiple bonds between transition metals and substituent-free (“bare”) main group elements. Although based mostly on accidental discoveries, the few noteworthy examples are now beginning to unfold general concepts of synthesis that are capable of being extended and thus are deserving of exploitation in preparative chemistry. The availability of further structural patterns exhibiting multiple bonds between transition metals and ligand-free main group elements might enable preparative organometallic chemistry to expand in a completely new direction (for instance by the stabilizing or activation of small molecules at the metal complex). This essay discusses the chemistry of complexes of bare carbon, nitrogen, and oxygen ligands (carbido-, nitrido-, and oxo-complexes) and their relationships to higher homologues from both a synthetic and a structural point of view.     

Thermal investigations on γ-radiation processed natural medicinal products (Ashwagandha,Amla and Hartiki)

DSC and TG studies were carried out on -radiation processed Indian natural products of medicinal importance, namely Ashwagandha (Withania Somnifera), Amla (Emblica Officinalis) and Hartiki (Terminalia chebula). DSC thermoanalytical curves were recorded from 35 to 400°C in air and nitrogen atmosphere. Similarly, TG thermoanalytical curves were taken from 35 to 700°C in air and nitrogen atmosphere. Irradiated products gave significantly different thermoanalytical profiles in comparison to non-irradiated samples. The differences were observed above decomposition temperature of 200°C and were non-linear with respect to radiation dose. Partial oxidation of the products during irradiation in air could be responsible for the observed differences.     

All-Solid-State PVC Membrane Ag+-Selective Electrodes Based on Diaza-18-Crown-6 Compounds

Two diaza-crown ether compounds were synthesized and evaluated as Ag⁺-selective carriers in polyvinylchloride (PVC) membrane electrodes of solid-state type. The all-solid-state PVC membrane electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 exhibited a super-Nernstian response (75±10mV per decade) over the concentration range of 1×10^–1 to 7×10^–6M of Ag⁺ ion and a detection limit of 3×10^–6M, at a wide range of pH (pH 4–7). The response time of the electrode was fast (less than 10s), and it can be used for three months without any significant deviation in potential. The proposed all-solid-state PVC membrane electrodes revealed high selectivity toward Ag⁺ ion with respect to alkali, alkaline earth, heavy and transition metal ions. A flow-through cell of all-solid-state PVC membrane Ag⁺-selective electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 has also been prepared and applied for flow-injection analysis of Ag⁺ ion in solution.     

Determination of the uronic acid composition of seaweed dietary fibre by HPLC

A high-performance liquid chromatographic (HPLC) method is described for determination of the ratio of beta-d-mannuronic acid to alpha-l-guluronic acid (M/G ratio) in dietary fibre of edible seaweeds. Total dietary fibre (TDF) content was determined gravimetrically. The TDF fraction was hydrolysed with 12 m and 1 m H(2)SO(4), then neutralized with AG 4 x 4 resin. The uronic acids were separated in a Tracer Extrasil SAX 5 micro m column (25 cm x 4 mm) at 35 degrees C, with 2 mm KH(2)PO(4) containing 5% methanol as mobile phase at a fl ow rate of 1.5 mL/min. The detection wavelength was UV 210 nm. The chromatographic identifications of beta-d-mannuronic acid and alpha-l-guluronic acid were confirmed by liquid chromatography-mass spectrometry (LC-MS). The method precision was 1.4% for beta-d-mannuronic acid and 3.5% for alpha-l-guluronic acid. The method was used to determine M/G ratio in canned seaweeds (Saccorhiza polyschides and Himanthalia elongata) and in dried seaweeds (H. elongata, Laminaria ochroleuca, Undaria pinnatifida, Palmaria sp. and Porphyra sp.).     

Reactive scattering of sodium clusters with molecular oxygen

The first reactive differential scattering study for atomic clusters is reported. Oxidation of Na _x (x8) with O₂ is investigated in a crossed beam apparatus. Sodium oxide (Na _n O,n4) and sodium dioxide (Na _n O₂,n6) are produced with a total reactive cross section from 50 to 80 Ų, depending on the cluster size. The excess energies for these reactions are estimated by an SCF type ab initio calculation and range from 0.5 to 5 eV. The large cross section may then be understood quantitatively in terms of a harpooning mechanism as a first step in the reaction path. Angular distributions have been determined for the most abundant products, showing strong forward scattering. Two different schemes are discussed for the reaction: while the dioxides Na _n O₂ may be formed by an evaporative cooling process from a highly excited collision complex, formation of Na _n O appears to originate from a direct process. In both cases the experimental data suggest that most of the exothermicity remains in the reaction products.     

On the applicability of the “abt” concept

Kaiser's “abt” concept rests on the experimental establishment of a linear relation between band width at half height, b_0.5, and capacity ratio, k, according to His column specification quantity, h_real, is dependent on the square of the slope a, obtained from a linear regression analysis based on this relation. It is shown in the present paper that an improvement of the experimental conditions leading to a lower extra-column contribution to band broadening, b, introduces a tendency towards a negative curvature in the plot at low k values. The mean slope increases, and an uncritical linear regression would yield an h_real-value which is higher than before and which would be in the opposite direction to the requirements of a reliable column specification. Generally the linear regression analysis has to be moved to higher k regions in cases of curvature, especially as it is also shown that h_real is an estimation of the traditional HETP value, H∞, that would be obtained when k approaches infinity. This theoretically expected relation is a strong motivation for the use of h_real as a column specification, since the b_0.5-value associated with H∞ is expected to be practically independent of b.     

Dimeric water embedded within a hydrophobic cavity of tetra-(p-tert-butyl)thiacalix[4]arene

X-ray crystallographic analysis and density functional B3LYP/6-31G(d) calculation confirm that dimeric water is embedded within a hydrophobic cavity of tetra-(p-tert-butyl)thiacalix[4]arene and stabilized by hydrogen bondings of aromatic π?H₂O(1) and methyl?H₂O(2) in the dimeric water inclusion complex with binding energies of 1.4 and 0.9 kcal mol⁻¹ respectively, and by hydrogen bonding formed between H₂O(2) and four phenolic OH groups from an adjacent tetra-(p-tert-butyl)thiacalix[4]arene, with binding energy of 3.8-4.2 kcal mol⁻¹.     

Synthesis of Some New Heterobicyclic Nitrogen Systems Bearing 7H‐1,2,4‐Triazolo[1,5‐d]tetrazol‐6‐yl Moiety for Biological Interest

Reaction of 6‐mercapto‐7H‐1,2,4‐triazolo[1,5‐d]tetrazole ( 1 ) wtih 1,2‐phenylenediamine afforded N‐{7H‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}‐1,2‐phenylenediamine which was cyclized to benzimidazolyl‐1,2,4‐triazolo[1,5‐d]tetrazoles using various one‐carbon cyclizing agents. Also, the treatment of 1 with maleic anhydride or phthalic anhydride gave the corresponding thio derivatives followed by hydrazinolysis to afford the thio heterobicyclic systems. Former structures of the products have been established upon elemental and spectral analyses.     

Chains, ladders and sheets of d metal–organic polymers generated from the flexible bipyridyl ligands

By use of the three-layer diffusion method, reactions of flexible bipyridyl ligands (4,4′-bpp or 3,3′-bpp) with M(II) salts (M = Zn, Cd) and multi-carboxylate ligands resulted in the formation of four interesting d¹⁰ metal–organic coordination polymers: [Zn(μ-4,4′-bpp)Br₂]_n (1), [Zn(μ-4,4′-bpp)(1,2-bdc)]_n · nH₂O (2), [Zn(μ-3,3′-bpp)(1,3-bdc)]_n · nCH₃OH · 2nH₂O (3) and [Cd(μ-3,3′-bpp)(C₄H₂O₄)]_n · 3nH₂O (4) (4,4′-bpp = 2,2′-bis(4-pyridylmethyleneoxy)-1,1′-biphenylene; 3,3′-bpp = 2,2 ′-bis(3-pyridylmethyleneoxy)-1,1′-biphenylene; bdc=benzenedicarboxylate, C₄H₄O₄ = fumaric acid). Complex 1 has a 2D sheet structure consisting of two unusual zigzag Zn(II) chains which are nearly perpendicular to each other. Complex 2 is comprised of two-leg ladders, in which [Zn(4,4′-bpp)] chains serve as the side rails and 1,2-bdc ligands serve as the cross rungs. In complex 3, every two 1,3-bdc ligands connect the neighbouring Zn(II)-3,3′-bpp dimetallic rings in η¹ coordination modes into an interesting chain structure. Complex 4 consists of an anionic macrocycle-containing cadmium dicarboxylate sheets that are separated by 3,3′-bpp. These d¹⁰ metal complexes exhibit high thermal stabilities and strong luminescence efficiencies.