碳酸钾催化的铁基氧载体煤催化化学链燃烧

研究了K₂CO₃催化剂及惰性担体对铁基氧载体煤化学链燃烧的影响.实验结果表明,K₂CO₃的添加可明显促进铁基氧载体与煤之间的反应速率,其原因可归结为从氧载体上迁移到煤颗粒上的K₂CO₃对煤-CO₂气化步骤的催化作用(该步骤为整个还原过程的速率控制步骤);由于K₂CO₃本身的促熔效果及加入K₂CO₃后导致的剧烈氧化还原反应,可以发现,K₂CO₃会增大铁基氧载体的烧结;不同惰性担体对铁基氧载体与煤的反应性影响不大,这是由于惰性担体对还原速控步没有影响;K₂CO₃在多循环化学链燃烧过程中依然可以保持一定的催化活性,另外由于催化剂的流失与失活,使得氧载体的反应活性有所下降.     

铜基载氧体与可燃固体废弃物化学链燃烧特性研究

采用机械混合法制备了铜基载氧体,利用两段式管式炉反应平台和磁悬浮热重分析仪分别研究了铜基载氧体与石墨、可燃固体废弃物典型组分及可燃固体废弃物热解气模型物CH₄的化学链燃烧特性。结果表明,机械混合法制备的Cu80Si950载氧体强度高,具有良好的转化率和循环稳定性,是实现可燃固体废弃物化学链燃烧的一种比较理想的载氧体。利用扫描电镜(SEM)、X射线衍射仪(XRD)和颗粒强度测定仪对各个反应阶段载氧体进行分析。结果表明,Cu80Si950载氧体参与反应后表面结构发生巨大改变,机械强度骤降。多次循环之后载氧体结构趋于规则均匀化,形成类似球棒形状的大孔隙率结构,强度保持不变,使得载氧体在长时间使用过程中反应性能得以维持。     

两相流中煤粉的燃烧机理及动力学特征

利用微型流化床动力学分析仪研究了两相流条件下无烟煤粉的燃烧反应机理和动力学特征,并与热重法所得结果进行比较分析。结果表明,当温度大于850℃时,煤粉燃烧机理发生了变化,燃烧气态产物的生成比例也随之改变;当气速大于0.10 m/s时,气体扩散限制基本被消除,煤粉燃烧反应速率主要受界面化学反应控制;煤粉燃烧反应速率随着氧气分压的增大呈幂函数形式增长,且氧气分压对煤粉静置燃烧的影响更加显著。煤氧两相流燃烧的表观活化能与静置燃烧相比降低了49 kJ/mol,相同温度条件下两相流燃烧的界面化学反应阻力也明显小于热重法测试结果。     

Cu-V-O氧化物催化燃烧甲苯的活性和抗硫性

采用溶胶-凝胶法制备一系列不同Cu/V比例的Cu-V-O催化剂,利用XRD、BET、H₂-TPR等手段对催化剂进行了表征,并考察其催化燃烧甲苯的活性和抗硫性。结果表明,适量的Cu掺杂会提高催化剂比表面积,而且Cu-V可以形成Cu₃V₂O₈晶型结构,使V₂O₅晶格氧活动增加,提高催化剂氧化-还原能力。其中,Cu_0.15V_0.85催化剂表现出最佳的活性和抗硫性;通过TiO₂负载可以进一步提高催化剂对甲苯的催化燃烧活性和抗硫性。     

Fe2O3/Al2O3氧载体用于甲烷化学链燃烧：负载量与制备方法的影响

以不同方法制备了系列Fe₂O₃/Al₂O₃氧载体,采用XRD、H₂-TPR、CH₄-TPR、O₂-TPD和BET等分析技术对氧载体进行了表征。研究了不同Fe₂O₃负载量氧载体的甲烷化学链燃烧性能,考察了不同制备方法对Fe₂O₃/Al₂O₃氧载体结构、反应性和产物选择性的影响。结果表明,Fe₂O₃负载量对氧载体活性及产物中CO₂选择性的影响较大,负载量较低时氧载体活性较低且引起甲烷部分氧化产物CO含量增加。制备方法亦对氧载体与甲烷的反应活性有所影响,整体上共沉淀法制备的质量分数60％Fe₂O₃/Al₂O₃氧载体具有较高的氧化活性和化学链循环稳定性。其在反应温度850℃、反应时间15 min、30次循环后甲烷转化率及产物中CO₂选择性均未见明显降低。     

Application of the Combustion Method in a Closed Flask to the Lead Determination in Atmospheric Aerosols

Abstract

The destruction of the filter for metal determination in atmospheric aerosols is an important step in the analysis. Nowadays the decomposition of this kind of sample has not been completely solved, so it is interesting to study new methods for filter sample attack. In the present work the application of the combustion method in a closed flask for mixed cellulose esters filter decomposition for lead determination is proposed. For this purpose optimum operating conditions as stopper flask design, sample size, flask volume, shaking time and volume and concentration of absorbing solution are established, and accuracy and precision of the proposed method using AAS for the measurements is given. The results obtained by the closed flask combustion are compared with those found by wet attack with HNO₃. The method proposed is rapid, has low reagent contamination and no loss of lead by volatilization or by amalgamation occurs. This method shows an accuracy and a precision in good agreement with the standard method.     

Strong Morphological Effect of Mn3O4 Nanocrystallites on the Catalytic Activity of Mn3O4 and Au/Mn3O4 in Benzene Combustion

Gold nanoparticles (3–4 nm) were deposited on Mn₃O₄ nanocrystallites with three distinct morphologies (cubic, hexagonal, and octahedral). The resulting structures were characterized, and their activities for benzene combustion were evaluated. The dominant exposed facets for the three kinds of Mn₃O₄ polyhedrons show the activity order: (103)≈(200)>(101). A similar activity order was derived for the interfaces between the Au and the Mn₃O₄ facet: Au/(200)≈Au/(103)>Au/(101). The metal–support interactions between the Au nanoclusters and specific facets of the Mn₃O₄ polyhedrons lead to a unique interfacial synergism in which the electronic modification of the Au nanoparticles and the morphology of the Mn₃O₄ substrate have a joint effect that is responsible for a significant enhancement in the catalytic activity of the Au/Mn₃O₄ system.     

固态研磨-燃烧法制CuO-ZnO-ZrO2/HZSM-5二甲醚合成催化剂

以柠檬酸为燃烧剂,采用固态研磨-燃烧法和机械混合法制备了CuO-ZnO-ZrO2/HZSM-5CO2加氢一步合成二甲醚双功能催化剂.采用固定床反应器,在反应温度270℃、压力为3.0 MPa、空速4 200 h-1条件下,考察了催化剂对CO2加氢一步合成二甲醚的反应性能,并采用XRD、BET、H2-TPR、NH3-TPD及XPS对催化剂的结构进行了表征.评价结果表明:随柠檬酸量的增加,二甲醚选择性和收率呈峰形变化趋势;当柠檬酸的量等于化学计量比的100%时,制备的催化剂具有较好的催化性能:CO2单程转化率为24.8%、二甲醚(DME)的选择性和收率分别为35.3%和8.7%.表征结果表明:柠檬酸的量影响催化剂的比表面积、还原性能以及CuO和ZnO的晶粒尺寸等,进而影响催化剂反应性能.     

The READY program: Building a global potential energy surface and reactive dynamic simulations for the hydrogen combustion

READY (REActive DYnamics) is a program for studying reactive dynamic systems using a global potential energy surface (PES) built from previously existing PESs corresponding to each of the most important elementary reactions present in the system. We present an application to the combustion dynamics of a mixture of hydrogen and oxygen using accurate PESs for all the systems involving up to four oxygen and hydrogen atoms. Results at the temperature of 4000 K and pressure of 2 atm are presented and compared with model based on rate constants. Drawbacks and advantages of this approach are discussed and future directions of research are pointed out. © 2014 Wiley Periodicals, Inc.     

大同烟煤增压富氧燃烧过程中硫、氯和氟的析出特性

利用高压热重结合傅里叶红外研究了大同烟煤在增压富氧燃烧过程中硫、氯和氟的释放行为,主要考察压力对其析出特性的影响。实验结果表明,压力的改变对煤中硫、氯和氟的迁移转化均有显著影响。随着压力的升高,黄铁矿硫向COS等中间产物的转化率逐渐增加,导致SO2的收率逐步上升,但在3 MPa时,燃煤SO2收率却有所降低。此外,压力升高后反应气氛中CO分压的增加促进了COS的生成,导致其收率逐渐上升。因为煤中有机氯析出和转化与挥发分的释放密切相关,所以高压下挥发分释放量的增加使得煤中有更多的有机氯析出并转化为HCl,而且压力升高后,挥发分燃烧速率和温度的升高促进了无机氟化物分解,HF生成量相应增加。此外,高压下水解反应的强化也提高了HF的收率。