确定线性偏微分方程组可积系统的对合特征集方法

基于Ritt-Wu特征集方法和Riquier-Janet理论,给出一种将线性微分方程组化成简单标准形式的有效算法．该算法通过消去冗余和添加可积条件获得线性微分方程组的完全可积系统(有形式幂级数解)或不相容判定．该算法不仅适用于常系数的线性偏微分方程组,而且对于变系数(以函数为系数)仍然有效．作者还给出了完全可积系统判定定理及其严格证明．     

FeCoB-SiO2磁性纳米颗粒膜的微波电磁特性

采用交替沉积磁控溅射工艺制备了超薄多层的FeCoB SiO2 磁性纳米颗粒膜 .利用x射线衍射仪、扫描探针显微镜、透射电子显微镜分析了薄膜的微结构和形貌特征 .采用振动样品磁强计、四探针法、微波矢量分析仪及谐振腔法测量薄膜试样的磁电性能和微波复磁导率 .重点对SiO2 介质相含量、薄膜微结构对电磁性能产生重要影响的机理做了分析和探讨 .结果表明 :这类FeCoB SiO2 磁性纳米颗粒膜具有良好的软磁性能和高频电磁性能 ,2GHz时的磁导率 μ′高于 70 ,可以应用于高频微磁器件或微波吸收材料的设计     

Directed Motion of a Molecular Motor Based on the Four-State Model with Unequal Substeps

A periodic one-dimensional four-state hopping model is proposed. In the model, the substeps betweenarbitrary adjacent states are unequal, and an explicit solution of the master equation is first obtained for the probabilitydistribution as a function of the time and position for any initial distribution with all the transients included. Next, thetransient behaviors in the initial period of time and the characteristic time to reach the steady state for the molecularmotor are discussed. Finally, we compare the steady state results to experiments and illustrate qualitatively the kineticbehaviors of a molecular motor under external load F.     

Phase and Amplitude Characteristics of Injection Lasers with Allowance for the Effects of Nonlinear Amplification in Current Modulation

The influence of the parameter of amplitude-phase coupling for nonlinear amplification on the phase-frequency characteristics of an injection laser in the regime of pumping current modulation has been investigated theoretically. The parameter is defined as the coefficient of proportionality between changes in the real and imaginary parts of the refractive index during variation of the density of photons in the cavity. The substantial dependence of the coefficient of phase modulation on the parameter of the amplitude-phase coupling for nonlinear amplification at small modulation frequencies is shown. A technique to determine the indicated parameter based on the frequency dependence of the ratio between the coefficients of phase and amplitude modulation is suggested.     

Sub-bundles of the complexified tangent bundle

We study embeddings of complex vector bundles, especially line bundles, in the complexification of the tangent bundle of a manifold. The aim is to understand implications of properties of interest in partial differential equations.

     

离子束合成钇硅化物的结构及红外谱特征

将稀土金属钇离子注入到n型单晶Si(111)中制备出钇硅化物埋层.利用x射线衍射、卢瑟福背散射和傅里叶红外吸收谱测量分析了样品的结构、原子的埋层分布和振动模式.结果表明，Y离子在注入过程中已与基底中的Si原子形成了YSi2结构相.真空下的红外光辐照处理促使YSi2择优取向生长，埋层中Si与Y的平均原子浓度比由24下降为20，与六方YSi2的化学计量比一致.还给出了钇硅化物的特征红外吸收谱.     

Bi12TiO20纳米粉体的制备及其光吸收特性研究

以钛酸四丁酯和硝酸铋为原料 ,利用化学溶液分解法制备了Bi12 TiO2 0 纳米多晶粉体 .采用XRD和TEM对其结构和形貌进行了表征 .结合热重 差热 (TG DTA)分析 ,探讨了Bi12 TiO2 0 晶相的形成机理 .通过UV Vis漫反射谱的测定 ,研究了Bi12 TiO2 0 纳米晶粉体的光吸收特性 .结果显示 ,从组成为化学计量比的前驱液中可以很容易制得纯Bi12 TiO2 0 纳米晶粉体 ,该Bi12 TiO2 0 纳米晶粉体呈现了在很宽的波长范围内 (5 6 0～ 385nm )对光的吸收的特性 .     

Effects of Evanescent Space-Harmonics on the Transmission Characteristics of a Gaussian Beam by Cylindrical Wire Grids

When electromagnetic waves propagate through a wire grid, there will be some evanescent space harmonics generated around the wire grid. In this paper, we mainly investigate their effects on the transmission characteristics of a Gaussian beam by cylindrical wire grids. The results are compared with those without taking account of evanescent space-harmonics.     

Structural optimization design for large mirror

The system design must be started from the concept with low cost and high performance. In this point, the topological shape of the structure is very important in the view of the structural rigidities and light-weight design.In this paper, the optimization methodology is presented in the design stage of the large optical mirror. We obtain the optimal layout through the topology optimization and then design the details through the size or shape optimization for structural rigidity.     

Cold compaction of ceramic powder: Computational analysis of the effect of pressing method and die shape

This paper deals with a computational analysis of the influence of the pressing method and part geometry on the final density distribution in the cold compaction process of ceramic alumina powders. The analysis is based on the explicit finite-element model proposed and validated in a previous study. The mechanical behavior of the processing material is described using a multisurface elastoplastic model, the modified Drucker-Prager/Cap model Published in Prikladnaya Mekhanika, Vol. 43, No. 10, pp. 129–134, October 2007.