Combining selection valve and mixing chamber for nanoflow gradient generation: Toward developing a liquid chromatography cartridge coupled with mass spectrometer for protein and peptide analysis

Toward developing a micro HPLC cartridge, we have recently built a high-pressure electroosmotic pump (EOP). However, we do not recommend people to use this pump to deliver an organic solvent directly, because it often makes the pump rate unstable. We have experimented several approaches to address this issue, but none of them are satisfactory. Here, we develop an innovative approach to address this issue. We first create an abruption (a dead-volume) within a fluid conduit. We then utilize an EOP to withdraw, via a selection valve, a train of eluent solutions having decreasing eluting power into the fluid conduit. When these solutions are further aspirated through the dead-volume, these solutions are partially mixed, smoothening concentration transitions between two adjacent eluent solutions. As these solutions are pushed back, through the dead-volume again, a smooth gradient profile is formed. In this work, we characterize this scheme for gradient formation, and we incorporate this approach with a high-pressure EOP, a nanoliter injection valve, and a capillary column, yielding a micro HPLC system. We then couple this micro HPLC with an electrospray ionization – mass spectrometer for peptide and protein separations and identifications.     

Gated-controlled electron pumping in connected quantum rings

We study the electronic transport across connected quantum rings attached to leads and subjected to time-harmonic side-gate voltages. Using the Floquet formalism, we calculate the net pumped current generated and controlled by the side-gate voltage. The control of the current is achieved by varying the phase shift between the two side-gate voltages as well as the Fermi energy. In particular, the maximum current is reached when the side-gate voltages are in quadrature. This new design based on connected quantum rings controlled without magnetic fields can be easily integrated in standard electronic devices.     

多级离心连续逆流手性萃取模型及模拟

基于单级手性萃取数学模型和质量守恒定律,建立了多级离心手性萃取数学模型,设计了多级离心萃取数学模型程序,并对多级离心萃取分离苯基琥珀酸（PSA）对映体进行了模拟.模拟了相比、萃取剂浓度、对映体浓度、进料位置和萃取级数等工艺参数对萃取效果（产物纯度和产率）的影响.模拟结果表明,考察的工艺参数共同影响萃取相和萃余相的产物纯度及产率;采用中间位置进料和较大的W/F相比有利于对称分离.实验发现：采用中间位置进料,10级离心萃取后萃取相中苯基琥珀酸的光学纯度ee（对映体过量）达到56%以上.模拟结果还表明,采用26级离心萃取器,中间进料,逆流分级萃取,萃取相及萃余相中的光学纯度ee都能达到98%以上.     

Solid Particle Distribution in Centrifugal Impeller Contactors

The recently developed centrifugal impeller is examined to investigate the solid–liquid mixing in a mechanically agitated contactor. Using the sample withdrawal method, the effects of impeller geometrical parameters, impeller rotational speed (200–700 rpm), solid particle size (500–1100 µm), and solid loading (2–10 vol%) on the degree of homogeneity are studied. The axial and the radial solid concentration profiles and the minimum impeller speed for the complete homogenization are also determined. In comparison with a widely used propeller impeller, considerably higher homogeneity values in lower impeller speeds are obtained (90% homogeneity against 16% homogeneity at 200 rpm at the same conditions). Having also lower power consumption makes this a superior impeller in solid–liquid mixing processes especially in shear-sensitive systems.      

基于微流控技术的蛋白质结晶及其筛选方法的研究进展简

微流控技术以其高通量、低消耗和集成化等优点成为蛋白质结晶微型化研究的重要手段. 本文综述了基于微流控技术的蛋白质结晶技术和方法,主要包括微泵微阀、液滴(Droplet)、滑动芯片(SlipChip)以及液滴实验室(DropLab)等技术. 此外,还针对当前膜蛋白在结构生物学研究中的重要地位,综述了应用于膜蛋白结晶的微流控技术的研究进展.     

Isolation of Volatile Compounds with Repellent Properties against Aedes albopictus (Diptera: Culicidae) Using CPC Technology

The present work describes the use of Centrifugal Partition Chromatography (CPC) for the bio-guided isolation of repellent active volatile compounds from essential oils. Five essential oils (EOs) obtained from three Pinus and two Juniperus species were initially analyzed by gas chromatography–mass spectrometry (GC/MS) and evaluated for their repellent properties against Aedes albopictus. The essential oil from needles of P. pinea (PPI) presented the higher activity, showing 82.4% repellency at a dose of 0.2 μL/cm². The above EO, together with the EO from the fruits of J. oxycedrus subsp. deltoides (JOX), were further analyzed by CPC using the biphasic system n-Heptane/ACN/BuOH in ratio 1.6/1.6/0.2 (v/v/v). The analysis of PPI essential oil resulted in the recovery of (−)-limonene, guaiol and simple mixtures of (−)-limonene/β-pheladrene, while the fractionation of JOX EO led to the recovery of β-myrcene, germacrene-D, and mixtures of α-pinene/β-pinene (ratio 70/30) and α-pinene/germacrene D (ratio 65/45). All isolated compounds and recovered mixtures were tested for their repellent activity. From them, (−)-limonene, guaiol, germacrene-D as well the mixtures of (−)-limonene/β-pheladrene presented significant repellent activity (>97% repellency) against Ae. albopictus. The present methodology could be a valuable tool in the effort to develop potent mosquito repellents which are environmentally friendly.     

基于功率谱包络能量和SVM的舰用发动机故障诊断

发动机是军舰上的重要部件之一,其稳定性对军舰的正常航行具有重要影响。以舰用发动机关键部件(主泵轴承)为具体研究对象,提出了基于功率谱包络能量和支持向量机相结合的故障诊断方法。首先获取了大量可表征舰用发动机主泵轴承健康状态的振动加速度信息,对其进行功率谱分析,获得其功率谱的包络能量;以获取的舰用发动机主泵轴承功率谱的包络能量构建特征向量,并设计基于SVM的舰用发动机主泵轴承故障诊断模型,对主泵轴承的故障进行诊断研究。研究结果表明,采用基于功率谱包络能量和SVM相结合的舰用发动机关键部件故障诊断方法,可以很好实现主泵轴承的故障诊断效能,为舰用发动机主泵轴承故障诊断的工程应用奠定了基础。     

流动控制沉积法制备PMMA叠层光子晶体薄膜及其光学性能研究

采用流动控制沉积法, 通过调控泵速和聚甲基丙烯酸甲酯(PMMA)胶体微球溶液的浓度, 制备出微球排列高度有序且薄膜紧密附着于基底的高质量光子晶体薄膜. 获得了制备高质量PMMA光子晶体薄膜的组装条件范围, 发现在该条件范围内, 当泵速或胶体微球溶液浓度一定时, PMMA光子晶体薄膜的厚度随胶体微球溶液浓度的增加或泵速的降低而增加. 研究了组装条件对PMMA光子晶体薄膜光学性能的影响, 发现光子禁带位置随光子晶体薄膜厚度增加或减少而红移或蓝移. 在此基础上, 控制组装条件得到了不同尺寸微球堆叠而成的叠层光子晶体薄膜, 并研究了其光学性能的变化规律. 结果显示, 叠层光子晶体薄膜的光子禁带峰为各层叠层光子晶体禁带峰的简单叠加, 且峰强度受光入射角方向影响.     

Simultaneous enantioselective determination of omeprazole,rabeprazole, lansoprazole,and pantoprazole enantiomers in human plasma by chiral liquid chromatography–tandem mass spectrometry

Proton pump inhibitors, including omeprazole, rabeprazole, lansoprazole, and pantoprazole, achieved simultaneous enantioselective determination in the human plasma by chiral liquid chromatography–tandem mass spectrometry. The four corresponding stable isotope‐labeled proton pump inhibitors were adopted as the internal standards. Each enantiomer and the internal standards were extracted with acetonitrile containing 0.1% ammonia, then separated with a Chiralpak IC column (5 µm, 4.6 mm × 150 mm) within 10 min. The mobile phase was composed of acetonitrile–ammonium acetate (10 mM) containing 0.2% acetic acid (50:50, v/v). To quantify all enantiomers, an API 4000 tandem mass spectrometer was used, and multiple reaction monitoring transitions were performed on m/z 360.1→242.1, 384.1→200.1, 370.1→252.1, and 346.1→198.1, respectively. No significant matrix effect was observed for all analytes. The calibration curve for all enantiomers were linear from 1.25 to 2500 ng/mL. The precisions for intra‐ and inter‐run were < 14.2%, and the accuracy fell in the interval of –5.3 to 8.1%. Stability of samples was confirmed under the storage and processing conditions. The developed method was also suitable for separation and determination of ilaprazole enantiomers. The validated method combining the equilibrium dialysis method was applied to the protein binding ratio studies of four pairs proton pump inhibitor enantiomers in human plasma.