N,N-二甲基甲酰胺中电沉积制备镁镍储氢合金

采用恒电位沉积法, 选用适宜的添加剂和络合剂, 成功地从N,N-二甲基甲酰胺(DMF)中沉积出致密的黑色Mg-Ni储氢合金膜. 并初步探讨了其共沉积机理. XRD显示沉积层中含有非晶态Mg-Ni相和微晶态Mg相. SEM图及相应能谱图分析表明合金颗粒以团聚状态存在, 合金成分不是很均匀. AAS分析表明沉积合金中Mg的原子摩尔分数达27.3%. LAND电池测试系统测得所镀合金膜的放电比容量最高为172.4 mAh/g.     

电沉积AuInSe2半导体薄膜上的电化学振荡现象

研究了电沉积制得的ＡｕＩｎＳｅ２半导体薄膜上过氧化氢阴极还原过程中产生的电化学振荡行为，对影响该振荡行为的一些因素如半导体薄膜的后处理、溶液组成、传质、光照、化学浸渍作用等进行了分析，同时采用外界周期性光照和外接小幅度正弦波电位来调节振荡频率，为金铟硒半导体薄膜发展成为光电传感器件提供了一定的理论与实践基础．     

Kinetic Regularities Governing the Reaction of Electrodeposition of Iron from Solutions of Citrate Complexes of Iron(III)

The kinetics of a multistep reaction of electrodeposition of iron out of aqueous citrate-containing solutions of trivalent iron is investigated. It is shown that concentrations of major solution components affect the partial current density of discharge of ions of divalent iron. It is established that the deposition of metallic iron occurs as a result of discharge of intermediates, which are hydroxy complexes of divalent iron. Kinetic parameters and mechanism of the reaction of discharge of complexes [FeOH]⁺ to a metallic state are determined. It is mentioned that the formation of poorly soluble hydroxy compounds of trivalent iron in a near-electrode layer leads to a decrease in the iron deposition current.     

Reactions of 3-cyclopropyl-3-oxopropionitrile anion generated by electroreduction of 5-cyclopropylisoxazole

3-Cyclopropyl-3-oxopropionitrile anion obtained by cathodic reduction of 5-cyclopropylisoxazole in an aprotic medium was used as an example to demonstrate that cyano ketone anions show a dual reactivity. The reaction of acetyl chloride with the electrogenerated tetrabutylammonium salt of 3-cyclopropyl-3-oxopropionitrile gave O-acylation products, whereas the reaction with its sodium salt gives C-acylation products. The reactions of these salts with hydroxylamine hydrochloride follow a different route: in the case of the tetrabutylammonium salt, resinification takes place, while in the case of the sodium salt, 5-amino-3-cyclopropylisoxazole is formed. The condensation of this product with 4,4,4-trifluoro-1-(2-thienyl)butane-1,3-dione in glacial AcOH affords 3-cyclopropyl-6-(2-thienyl)-4-(trifluoromethyl)isoxazolo[5,4-b]pyridine in 85% yield. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2110–2114, November, 2007.     

Electrodeposition of mercury film on electrodes modified with clay minerals

A new type of carbon paste electrode modified with clay mineral and covered with a mercury film is presented in this work. Electrodeposition of the mercury film was performed on the carbon paste electrode modified with montmorillonite. The mercury film was deposited by both electrodeposition in situ and a preliminary electrodeposition. The pre-deposited film of mercury showed to be suitable for anodic stripping voltammetry. An open-circuit sorption of Cd, Pb, and Cu with subsequent anodic stripping voltammetry exhibited higher current responses of metals. Besides the enhanced sensitivity superior separation of the current responses during a simultaneous stripping of metals is expected to be achieved by means of the newly prepared electrode. Presented at the 57th Congress of Chemical Societies, Tatranské Matliare, 4–8 September 2005.     

不同取向的CoSb3纳米线阵列的电化学法制备

近年来,金属纳米线及其阵列由于其新奇的物理和化学特性和在纳米器件方面潜在的应用前景,越来越受到人们的关注。氧化铝模板合成一维纳米材料具有设备简单、制作方便等优点,因而成为近年来人们常用的一种方法。利用电化学沉积的方法在多孔氧化铝模板中沉积各种成分的纳米线已成为纳米材料制备的一种常见的方法。这种方法不仅可以得到大面积有序的纳米线阵列,还可以根据需要调节孔洞的大小来控制纳米线的直径[1￣3]。最近理论研究结果预言[4￣6],由于纳米材料的量子限域效应,热电材料的纳米线将有比其相应块体材料更高的品质因数n,这极大地激…     

Determination of trace arsenic on hanging copper amalgam drop electrode

Hanging copper amalgam drop electrode has been applied for trace determination of arsenic by cathodic stripping analysis. Detection limit for As(III) as low as 0.33 nM (0.02 μg/L) at deposition time (240 s) could be obtained. For seven successive determinations of As(III) at concentration of 5 nM relative standard deviation was 2.5% (n = 7). Interferences from selected metals and surfactant substances were examined. Absence of copper ions in sample solution causes easier optimization and makes method less vulnerable on contamination. The developed method was validated by analysis of certified reference materials (CRMs) and applied to arsenic determinations in natural water samples.     

Adsorptive Stripping Voltammetric Determination of Ultra Trace of Zinc and Lead with Carbidopa as Complexing Agent in Food and Water Samples

In the present work, the cathodic stripping voltammetric methodology using a hanging mercury drop electrode was described for simultaneous determination of lead and zinc in different real samples. The method is based on adsorption of metal ions on mercury electrode using carbidopa as a suitable complexing agent. The potential was scanned to the negative direction and the differential pulse stripping voltammograms were recorded. Optimal conditions were found to be: accumulation time; 70 s, accumulation potential; 50 mV versus Ag/AgCl, scan rate; 40 mV s^?1, supporting electrolyte; 0.01 M ammonia buffer at pH 8.5, and concentration of carbidopa; 8.0 μM. The relationship between the peak current versus concentration was linear over the range of 0.1–210 and 0.2–170 nM for lead and zinc, respectively. The detection limits are 0.09 and 0.15 nM for lead and zinc ions respectively. The relative standard deviations at a concentration level of 70 nM of both metal ions are found 1.08 and 1.24% for lead and zinc ions respectively.     

Cathodic materials for lithium-ion batteries based on spinels Li x Mn2−y Me y O4: Synthesis, phase composition, and structure of Li x Mn2−y Cr y O4 at x = 1.0−1.2 and y = 0−0.5

Extralithiated chromium-doped finely divided lithium-manganese spinels are synthesized as a result of a two-step solid-phase process with use made of the fusion-saturation method. The spinels are intended for application as cathodic materials in lithium-ion batteries. The phase composition and structural characteristics of samples of cathodic materials of the type Li _x Mn_2?y Cr _y O₄ are studied. The samples with x = 1.0?1.2 and y = 0?0.5 are characterized by phase purity and cubic syngony with parameter a = 0.817?0.823 nm and a disperseness equal to 1–2 nm. The maximum content of chromium and lithium in Li _x Mn_2?y Cr _y O₄ that does not lead to violation of cubic syngony is determined. Lithium excess in the cathodic material that does not exceed 0.2 formula units may be used for compensating the irreversible capacity. Replacing some manganese atoms by chromium may facilitate retention of the structures’s integrity in the course of cycling.     

离子液体中电沉积制备钴纳米线阵列

Porous anodic alumina (PAA) was used as a template to prepare Co nanowires array from 1-ethyl-3-methylimidazolium chloride ionic liquid by direct current method. The surface morphology of porous anodic alumina template was observed by field emission-scanning tunneling microscopy (FE-SEM) before and after the electrodeposition of Co nanowires. The electrodeposition of Co nanowires was characterized by transmission electron microscopy (TEM) and X-ray powder diffraction (XRD). TEM results indicate that the Co nanowire surface is coarse and porous when aqueous solution was used as electrolyte， and the Co nanowire deposited from the ionic liquid is uniform and smooth. XRD results show that the electrodeposition of Co is a mixture of crystal and microcrystal phase.