Crystal and Molecular Structure of OMPCTF

ＣｒｙｓｔａｌａｎｄＭｏｌｅｃｕｌａｒＳｔｒｕｃｔｕｒｅｏｆＯＭＰＣＴＦＷａｎｇＲｕｉ－Ｙａｏ；ＪｉｎＺｈｏｎｇ－Ｓｈｅｎｇ（ＬａｂｏｒａｔｏｒｙｏｆＲａｒｅＥａｒｔｈＣｈｅｍｉｓｔｒｙａｎｄＰｈｙｓｉｃｓ，ＣｈａｎｇｃｈｕｎＩｎｓｔｉｔｕｔｅｏｆＡ...     

Na2CO3调质钙基脱硫剂硫化机理实验研究

对经Na2CO3溶液调质石灰石煅烧产物CaO的物理结构及硫化特性进行了研究,发现同等条件下调质后石灰石煅烧产物CaO(M-CaO)比未经调质的CaO(N-CaO)具有更高的钙转化率.利用XRD技术对CaO晶体结构进行了测定,通过比较二者的晶胞参数和晶格畸变度等并结合其孔特性,证实M-CaO之所以比N-CaO具有更高的钙转化率,是由于M-CaO比N-CaO具有更高的晶体缺陷浓度,使得在硫化反应过程中通过产物层的扩散具有更高的离子扩散率.     

Asymptotic behaviors of competitive Lotka-Volterra system with stage structure

In this paper, a two-species competitive model with stage structure is presented and studied. Results on the global extinction and permanence are given, which generalize the well-known three theorems for the two species competitive system and, moreover, they confirm the negative effect of stage structure on the permanence of populations as well as estimate the degree of such effect. Conclusions in this paper suggest that for a competitive community stage structure is also one of the important reasons that cause permanence and extinction.     

Solved and unsolved problems in surface structure determination

The range of surface structural problems of interest in understanding the physics and chemistry of solid surfaces is reviewed with reference to the available methods and their strengths and limitations. Key challenges being addressed currently concern the achievable precision of measurements and their physical and chemical significance, and the complexity of the problems which may be solved. Past progress and future problems are illustrated with a series of examples ranging from the relaxation of simple clean metal surfaces through complex semiconductor reconstructions to large molecular adsorption and coadsorption systems and complex adsorbate-induced reconstructions. The strengths and limitations of scanning tunnelling microscopy as a complement to true quantitative structural methods are discussed, as is the role of chemical state specificity and elemental specificity in solving complex molecular adsorbate systems.     

Synthesis and Crystal Structure of Di-n-butyltin(IV) Complex with 2-Oxo-propionic Acid (4-Pyridinecarbonyl) Hydrazone

Introduction The studies of diorganotin(IV) complexes are of current interest owing to their wide range of applica-tions such as biocides and homogeneous catalysts in industry.1 In recent years there have been more and more reports on the synthesis, antitumour activities and structural elucidation of various diorganotin(IV) deriva-tives of carboxylic acid.2-5 In particular, people take considerable interest in structural studies of diorgano-tin(IV) complexes of carboxylic acid, because there…     

Physical properties and phase separation structure of Antheraea pernyi/Bombyx mori silk fibroin blend films

The physical structure and compatibility of solution-cast Antheraea pernyi/Bombyx mori silk fibroin blend films were stuided by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, dynamic viscoelastic measurement, infrared spectroscopy, and x-ray diffractometry. The DSC curves of the blend films showed independent endotherms at 280 and 358°C, corresponding to the thermal decomposition of B. mori and A. pernyi silk fibroins with random coil conformation. The intensity was roughly proportionate to the amount of each component in the blend. The thermal behavior corresponding to the conformational transitions induced by heating on A. pernyi and B. mori silk fibroins overlapped in the temperature range 190–230°C. Thermal expansion and contraction properties, as well as weight retention behavior of the blend films were intermediate between the pure components, as shown by the TMA and TGA curves. The onset temperature of the storage modulus curve decreased markedly, approaching that of B. mori silk fibroin film when the amount of this component in the blend increased. The loss modulus curve of the blend films showed two peaks at ca. 190 and 210°C, the former corresponding to B. mori, and the latter to A. pernyi silk fibroin. Infrared spectra of the blends exhibited absorption bands characteristic of the pure components overlapping in the spectral region 2000–400 cm^?1. The x-ray diffraction peaks at 23 and 21.5°, attributed to the crystalline spacings of A. pernyi and B. mori fibroins, respectively, overlapped in the diffraction curves of the blends, while the peak at 11.4°, of A. pernyi, increased as the content of this fibroin in the blend increased. The degree of crystallinity, calculated from the x-ray diffraction curves, diminished as the amount of B. mori silk fibroin decreased. A low degree of compatibility exists between the two fibroins when they are cast from aqueous solution in the experimental conditions adopted in this work. © 1994 John Wiley & Sons, Inc.     

On interrelation between the internal pressure and the cohesion energy density

The question about the definition of the “internal pressure” concept is being discussed. It is shown that the previously found differential relation between the cohesion energy density and the internal pressure is one of the examples of an absolutely general interrelation between definitely connected differential functions. It is ascertained that the ratio (the internal pressure divided by the cohesion energy density) is a structuresensitive parameter inherent to the calorific (thermal) equation of a liquid state.     

Syntheses and Structures of Sil abridged Hafnocene Dichlorides

The present paper covers three silabridged hafnocene dichlorides(1, 2 and 3) prepared by sequential reactions of α, ω-dichloropermethyl polysilane with cyclopentadienyl sodium, n-butyl lithium and hafnium tetrachloride. Their structures were characterized by elemental analyses, UV, 1H(13C) NMR and MS. Furthermore the crystal and molecular structures of 1 and 2 were determined by X-ray diffraction method. The crystal of 1 is monoclinic, space group C2/c with a=1. 3401(4), b=0. 9977(3), c = 1. 0922(4) nm; β=94. 07(1)° V=3. 6342 nm3, Z = 2, Dc = 2.155 g·cm-3. The final deviation factor R = 0. 064. The crystal of 2 is monoclinic, space group P21/c with a=0.0847(1), b=1.5181(1), c=2.9824(2) nm; β= 94. 07(1)°? V=3.634 nm3; Dc= l. 805 g·cm-3. The final deviation factor R = 0. 033. The relationship between the silabridged structure and spectral properties is also discussed.     

CRYSTAL STRUCTURE AND MORPHOLOGY OF NASCENT SAMPLES OF SYMMETRIC AROMATIC POLYESTERS——Ⅱ. POLY(p-PHENYLENE 2,6-NAPHTHALATE)

Confined thin film melt polymerization (CTFMP) of naphthalene chloride/hydroquinone (NCMQ, 1/1, molar)mixtures at polymerization temperatures (T_p) below ca. 300℃ resulted in relatively thick, elongated crystals. Polymerizationof NC/HQ above 300℃ between glass yielded well-formed lamellar crystals ca. 100 A thick. Phase Ⅰ and Ⅱ [001] EDpatterns were obtained for all T_p, the relative amount of phase Ⅰ increasing with T_p. Polymerization of naphthalenedicarboxylic acid/hydroquinione diacetate 1/1 mixtures at high T_p also yielded lamellar crystals that "curled up" off of thesubstrate. When the high temperature CTFMP polymerization was conducted between mica, aggregates of lamellae on-edgedeveloped but epitaxial growth did not occur. Epitaxial growth of lamellae between mica could be obtained, however, byconfined thin film solution polymerization, with both of the latter samples yielding apparently related ED patterns from adifferent unit cell than phase Ⅰ or Ⅱ. Fiber patterns, obtained from sheared samples, indicated considerably greater crystaldisorder than in the nascent crystals. Refinement of the phase Ⅰ unit cell parameters, based on the [001] and [01 1] EDpatterns, with modeling based on Cerius~2, suggests a monoclinic phase Ⅰ unit cell with a = 7.76, b = 5.71, c = 14.99 A, α = γ= 90°, β= 99.7°, ρ = 1.47 g/cm~3, space group P12_1/al.