Synthesis, band structure, and optical properties of Ba2ZnV2O8

A novel compound Ba₂ZnV₂O₈ has been synthesized in high temperature solution reaction and its crystal structure has been characterized by means of single crystal X-ray diffraction analysis. It crystallizes in monoclinic system and belongs to space group P2₁/c with a=7.9050(16), b=16.149(3), , β=90.49(3). It builds up from 1-D branchy chains of [ZnV₂O₈⁴⁻]_∞, and the Ba²⁺ cations are located in the space among these chains. The IR spectrum, ultraviolet-visible diffuse reflection integral spectrum and fluorescent spectra of this compound have been investigated. The calculated results of energy band structure by the density functional theory method show that the solid-state compound of Ba₂ZnV₂O₈ is an insulator with direct band gap of 3.48 eV. The calculated total and partial density of states indicate that the top valence bands are contributions from the mixings of O-2p, V-3d, and Zn-3d states and low conduction bands mostly originate from unoccupied antibonding states between the V-3d and O-2p states. The V-O bonds are mostly covalence characters and Zn-O bonds are mostly ionic interactions, and the ionic interaction strength is stronger between the Ba-O than between the Zn-O. The refractive index of n_x, n_y, and n_z is estimated to be 1.7453, 1.7469, and 1.7126, respectively, at wavelength of 1060 nm for Ba₂ZnV₂O₈ crystal.     

Capacity factors and peak widths in the gradient elution reversed phase separation of high molar mass polystyrenes

Summary A simplex method for determining the constantsS andk _o from the equation lnk’=lnk _o−S ϕ (was developed and applied to the reversed phase separation of high molar mass polystyrenes using gradients of any curvature. Experimental retention times described using the equation had a standard deviation of 1.1%. The inclusion of a quadratic term in the equation was found to be unwarranted. BothS and lnk _o varied linearly with ln molar mass. The logarithm of peak width of an eluting polystyrene peak was found to be a linear function of the mobile phase composition at elution. The slope was equal toS.     

Electroreduction of Aryldiazonium Ion at the Polar and Non-Polar Faces of ZnO: Characterisation of the Grafted Films and Their Influence on Near-Surface Band Bending

ZnO is a strong candidate for transparent electronic devices due to its wide band gap and earth-abundance, yet its practical use is limited by its surface metallicity arising from a surface electron accumulation layer (SEAL). The SEAL forms by hydroxylation of the surface under normal atmospheric conditions, and is present at all crystal faces of ZnO, although with differing hydroxyl structures. Multilayer aryl films grafted from aryldiazonium salts have previously been shown to decrease the downward bending at O-polar ZnO thin films, with Zn−O−C bonds anchoring the aryl films to the substrate. Herein we show that the Zn-polar (0001), O-polar (000 ), and non-polar m-plane (10 0) faces of ZnO single crystals, can also be successfully electrografted with nitrophenyl (NP) films. In all cases, X-ray photoelectron spectroscopy (XPS) measurements reveal that the downward surface band bending decreases after modification. XPS provides strong evidence for Zn−O−C bonding at each face. Electrochemical reduction of NP films on O-polar ZnO single crystals converts the film to a mainly aminophenyl layer, although with negligible further change in band bending. This contrasts with the large upward shifts in band bending caused by X-ray induced reduction.     

A Theoretical Study on the Conductivity of Carbon Doped BNNT

From the changes in energy band, density of state (DOS) and electronic structure calculated by the DFT/B3LYP method, the conductivity of carbon doped boron‐nitride nanotube (BNNT), which is formed by C‐C bond substituting B‐N bond, was discussed. The results indicate that the substitution will strengthen the conductivity of the tube, and its semi‐conductivity might be adjusted by controlling the substitution.     

Synthesis and characterisation of bis(pentafluorophenyl)antimony(V) cations, [(C6F5)2SbL3]

Pentacoordinate complex cations of the general formula [(C₆F₅)₂SbL₃]³⁺ stabilized as solid salts in combination with tetraphenylborate (BPh₄), tetrafluorobroate (BF₄) anions, where L=DMSO, Ph₃AsO, PyO, DMF, α-, β- and γ-picoline have been isolated. The newly formed complexes were characterized by elemental analysis, molar conductance measurements, solid-state IR and and NMR. From these results, a five-fold coordination around antimony was required.     

Growth, Band Structure and Optical Properties of LiSrBO3 Crystal

The bulk crystal of LiSrBO3 (8.39 g) with a size of 21mm×20mm×15mm was grown by high temperature solution growth method. The relationship between growth habit and crystal structure was discussed. The transmission spectrum shows an UV absorption edge at about 300 nm. The melting temperature of this crystal was determined to be 942 ℃ by DTA-TG measurement. The band structure of the LiSrBO3 crystal was studied by means of the first principle method. An indirect band gap was found to be about 4.0 eV,and a low dielectric constant was estimated to be about 1.9 in terms of theoretical results.     

A study of preferential solvation of N-alkyl pyridinium iodides in mixed solvents containing acetonitrile

The charge transfer (CT) band maximum of N-alkyl pyridinium iodide (NAPI) has been studied as a function of the composition of binary mixed dipolar aprotic solvents. The deviation from linearity of the energy maximum (E₁₂) and the mole fraction (of a component solvent) plot is explained as due to a preferential solvation by the more polar cosolvent in the binary mixture. The extent of preferential solvation has been observed to vary with the composition, the maximum being towards the less-polar end. The role of hydrogen bond donating ability of a solvent in preferential solvation is discussed.     

Effect of the ionic strength of salts on retention and overloading behavior of ionizable compounds in reversed-phase liquid chromatography I. XTerra-C18

The influence of the salt concentration (potassium chloride) on the retention and overloading behavior of the propranolol cation (R'-NH2+ -R) on an XTerra-C18 column, in a methanol:water solution, was investigated. The adsorption isotherm data were first determined by frontal analysis (FA) for a mobile phase without salt (25% methanol, v/v). It was shown that the adsorption energy distribution calculated from these raw adsorption data is bimodal and that the isotherm model that best accounts for these data is the bi-Moreau model. Assuming that the addition of a salt into the mobile phase changes the numerical values of the parameters of the isotherm model, not its mathematical form, we used the inverse method (IM) of chromatography to determine the isotherm with seven salt concentrations in the mobile phase (40% methanol, v/v; 0, 0.002, 0.005, 0.01, 0.05, 0.1 and 0.2 M). The saturation capacities of the model increase, q(s,1) by a factor two and q(s,2) by a factor four, with increasing salt concentration in the range studied while the adsorption constant b1 increases four times and b2 decreases four times. Adsorbate-adsorbate interactions vanish in the presence of salt, consistent with results obtained previously on a C18-Kromasil column. Finally, besides the ionic strength of the solution, the size, valence, and nature of the salt ions affect the thermodynamic as well as the mass transfer kinetics of the adsorption mechanism of propranolol on the XTerra column.     

Silver nanoparticles dispersed within amphiphilic star-block copolymers as templates for plasmon band materials

Formation of silver nanoparticles has been developed based on a template technique. Amphiphilic star-block copolymers employed as single molecule template, utilizing the coordination of Ag⁺ ions with carboxyl groups in the core of the star-block copolymer. Silver nanoparticles have been prepared by the addition of chemical reductant, e.g., NaBH₄. The solution of the resultant nanosphere composites showed yellow due to the surface plasmon resonance. These composites were soluble in organic solvents, because hydrophobic corona of the star-block copolymer protected the fabricated silver nanoparticles from aggregation.     

Semi‐classical formulation of time‐dependent discrete variable representation method

In this article, we apply a novel time‐dependent discrete variable representation (TDDVR) method proposed by Barkakaty and Adhikari to investigate tunneling through an Eckart barrier. This semi‐classical method is theoretically rigorous and straightforward to implement. Among the TDDVR formulations, this report presents the first derivation of a rigorous form of quantum force (QF) for the present perspective. The validity of this semi‐classical approach is demanded based on the excellent agreement of the tunneling probability with the corresponding quantum results. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004