Determination of different arsenic species in food‐grade spirulina powder by ion chromatography combined with inductively coupled plasma mass spectrometry

A “two‐step” pressurized microwave‐assisted extraction method coupled with ion chromatography with inductively coupled plasma mass spectrometry for the determination of different arsenic species in spirulina samples was developed. The extraction method used H₂O₂/H₂O (1:5, v/v) as solvent to extract all arsenic species except arsenite, which was extracted by using water as solvent. The extraction method had a satisfactory recovery (>96%) and took a short time (20.0 min). With our method, all arsenic species in spirulina samples were completely separated and determined with recoveries of 84–105% and relative standard deviations of 2–4%. Food‐grade spirulina powder samples from seven provinces (Inner Mongolia, Zhejiang, Fujian, Hainan, Yunnan, Jiangsu, and Guangxi) in China were analyzed using the optimized protocol. Arsenate was detected at the concentration range of 170–394 ng/g in all the spirulina samples. Dimethylarsinic acid was detected at the concentration range of 32–839 ng/g in spirulina from above‐six provinces except Guangxi. Monomethylarsonic acid (67 ± 3 ng/g) was detected only in spirulina from Yunnan province. Arsenite was detected at the concentration range of 28–147 ng/g in spirulina from above five provinces except Hainan and Guangxi. Five unknown organic arsenic species were found in spirulina from above six provinces except Guangxi.     

方便面中砷元素的形态分析

建立了硝酸提取,高效液相色谱一原子荧光联用技术测定方便面中不同砷形态的分析方法。样品经0．15mol／L盐酸溶液超声提取后离心过滤,上机测试。实验表明：砷的4种形态亚砷酸[As（Ⅲ）]、砷酸[As（V）]、一甲基胂酸（MMA）和二甲基胂酸（DMA）的线性范围为0-50μg／L,相关系数（r）均优于0．9990,检出限在2～8μg／L之间,砷各形态的测量重复性（以RSD表示）均小于5％,样品的加标回收率为78％-118％。同时用原子荧光光度计检测了样品中总砷,并将两种方法测定结果进行了对比,结果符合理论以及文献报道。该方法操作简单快速、结果准确可靠,适用于方便面中砷形态的分析测定。     

氢化物发生-原子荧光光谱法同时测定水中砷和锑

建立在硝酸介质中用氢化物发生-原子荧光光谱法同时测定水中砷和锑的方法。优化了仪器工作条件、酸度、硼氢化钾及还原剂浓度。砷、锑的线性范围为0～10．0μg／L;检出限分别为0．02,0．01μg／L;测定结果的相对标准偏差分别为1．77％～3．72％,2．95％～4．87％（n=6）;加标回收率分别为98％106％,96％105％。该法操作简便,灵敏度高,快速,便于推广,适用于水中砷和锑的同时测定。     

微波消解–原子荧光法同时测定PM2.5中砷、汞含量

采用微波消解–原子荧光法测定PM2.5中砷、汞含量。实验结果表明,当还原剂硼氢化钾的质量分数为2%、溶液介质酸度为4%(体积分数)盐酸时,同时测定砷、汞可获得最佳的荧光值。砷、汞测定的检出限分别为0.027,0.006μg/L,空白滤膜的加标回收率分别为95.3%~101.7%,96.0%~106.0%,样品的加标回收率分别为95.0%~103.5%,93.3%~110.0%。该法检出限低,准确度高,适用于环境空气PM2.5中砷、汞含量的测定。     

Electrochemical Oxidation of Ibuprofen and Its Voltammetric Determination at a Boron‐Doped Diamond Electrode

The electrochemical oxidation of ibuprofen at a boron‐doped diamond electrode (BDDE) and its voltammetric determination is reported for the first time. A well‐defined oxidation peak was observed at around 1.6 V in 0.1 mol L^?1 H₂SO₄ solution with 10 % (v/v) ethanol at the BDDE surface activated by either cathodic or anodic pretreatments. A differential‐pulse voltammetric method for the determination of ibuprofen in pharmaceutical formulations was optimized with a detection limit of 5 µmol L^?1 and compared with the British Pharmacopeia method.     

氢化物发生–原子荧光光度法测定食品和食品添加剂中的砷、汞和铅

建立氢化物发生–原子荧光光度法测定食品和食品添加剂中砷、汞和铅元素的方法。对茶叶、方便面、精料与二氧化硅样品的前处理方法进行了研究,讨论了酸介质与酸度、还原剂浓度、铁氰化钾与草酸浓度等因素对样品测定的影响。当还原剂质量浓度为20 g/L、载流酸度为5%、铁氰化钾和草酸质量浓度分别为4 g/L和2 g/L时,砷、汞和铅的方法检出限分别为0.024,0.008,0.066μg/L,方法的回收率为85%~105%,测量结果的相对标准偏差分别为0.7%,0.7%,1.8%。该方法简便、快速、结果准确可靠,能满足食品和食品添加剂中砷、汞、铅的测定。     

Ultra‐low friction of fluorine‐doped hydrogenated carbon film with curved graphitic structure

Fluorine‐doped hydrogenated carbon film was grown by chemical vapor deposition technique using CH₄ and CF₄ as feedstock, with a pulse DC‐bias power supply. The structure of as‐deposited film was characterized by transmission electron microscopy and Raman spectra. The results suggested that the film could be considered as composite thin film with curved graphitic structures embedded in amorphous carbon matrix. The mechanical properties and friction coefficient were tested by TI 950 TriboIndenter and UMT‐2 at humidity of 30%, respectively. The results showed that the film exhibited high hardness (~11.04 GPa), good elasticity recovery(~83%) and ultra‐low coefficient of friction (~0.01). Copyright © 2013 John Wiley & Sons, Ltd.     

Bioconjugated Luminescent Nanoparticles for Biological Applications

Abstract

Inorganic nanostructures that interface with biological systems have recently attracted widespread interest in biology and medicine. Nanoparticles are thought to have potential as novel luminescent probes for both diagnostic (e.g., imaging) and therapeutic (e.g., drug delivery) purposes because of their size comparable to biomolecules and their novel optical, electronic, and magnetic properties. Critical issues for successful nanoparticle delivery include the ability to target specific tissues and cell types and escape from the biological particulate filter known as reticuloendothelial system. Three distinct types of luminescent nanoparticles have been identified which show promise in bioanalysis, namely dye‐doped nanoparticles, semiconductor and metal nanoparticles. In this article we examine the recent advances in the development of dye‐doped nanoparticles, metal and semiconductor nanoparticles, bioconjugation schemes to attach these nanoparticles to biomolecules and a few biological applications.