Indirect thermal lens detection for capillary electrophoresis

Thermal lens detection with a 325.0 nm He-Cd excitation laser is used for thermooptical indirect detection in combination with the capillary electrophoretic separation of organic anions. The optimization of indirect thermooptical detection is discussed. With Mordant Yellow 7 (an azo dye) chosen as a probe ion limits of detection for 1-heptane-, 1-pentane-, 1-butane-, 1-propanesulfonic, and acetic acid at a level of n × 10⁻⁷ M were achieved with a separation electrolyte containing 50 μM of the probe ion and 5 mM Tris pH 9.90. A further increase in the detection sensitivity (twofold decrease in the limit of detection ) was obtained with a separation electrolyte containing a volume fraction of 20% acetonitrile.     

Study of Densities, Viscosities and Ultrasonic Speeds of Binary Mixtures Containing 1,2-Dimethoxyethane and an Alkan-l-ol at 298.15 K

The viscosity deviation (Δη), the excess molar volume (V ^E) and the ultrasonic speed (u) have been investigated from viscosity (η) and density (ρ ) measurements of binary liquid mixtures of 1,2-dimethyoxyethane with methanol, ethanol, propan-1-ol, butan-1-ol, pentan-1-ol, hexan-1-ol or octan-1-ol over the entire range of composition at 298.15 K. The excess volumes are negative over the entire range of composition for all of the mixtures with the exception of hexan-1-ol and octan-1-ol. The excess isentropic compressibilities (K _S ^E) and viscosity deviations are negative for all of the mixtures. The magnitudes of the negative values of V ^E decrease with the number of carbon atoms of the alkan-1-ol. The trend of increasing K _S ^E values with the chain length of the alkanol is similar to that observed in the case of V ^E. Graphs of V ^E, Δ η, K _S ^E, Δ u, L _f ^E and Z ^E against composition are presented as a basis for a qualitative discussion of the results.     

A concept for bifocal contact‐ or intraocular lenses: liquid single crystal hydrogels (“LSCH”)

The synthesis of liquid single crystal hydrogels (“LSCH”) in suitable molds offers an innovative concept to realize bifocal contact‐ or intraocular‐lenses. LSCH combine the properties required for applications as bifocal ophthalmic lenses: the soft and water‐containing hydrogel enables oxygen permeation and exhibits high birefringence due to the liquid crystalline phase structure built up by rigid rod‐like amphiphiles. Via a photo‐initiated crosslinking reaction of aqueous solutions of monomeric lyotropic liquid crystalline amphiphiles in the macroscopically ordered liquid crystalline state, we obtain optically uniaxially ordered and transparent LSCH. The orientation process and the phase structure of the anisotropic hydrogel is analyzed by deuterium NMR‐spectroscopy. Copyright © 2002 John Wiley & Sons, Ltd.     

Influence of the variable wall thickness of the sample tubes and a quartz Dewar on the EPR signal intensity in a single TE102 and double TE104 rectangular cavity

The response of a single TE₁₀₂ and double TE₁₀₄ rectangular cavity to the insertion of samples contained in tubes with variable wall thickness and a quartz Dewar into the cavity has been analyzed. A direct, indirect, and concurrent (positive or negative) “lens effect” inside the double TE₁₀₄ rectangular cavity is discussed. The experimental dependence of the EPR signal intensity on the wall thickness of the sample tube, δ, for the line-like samples with identical length of the sample material column, L=30 mm, recorded in the microwave cavity showed a directly proportional increase of the relative “lens effect” with the increase of the wall thickness of the tube in the interval, δ∈<0.1 mm, >0.5 mm. The insertion of the variable-temperature double-wall quartz Dewar (home-built, resonant frequency shift, ca. −300 MHz) into the single TE₁₀₂ rectangular cavity showed the same relative “lens effect”, with ca. 1.5-time increase of the EPR signal intensity, for a point-like sample and the line-like samples with material columns of diameter of 1 and 1.3 mm, and wall thickness of the sample tubes, δ∈<0.1 mm, >0.5 mm. The increased effect of the Dewar arises because the active volume of the quartz Dewar tube walls is always much more larger than the active volume of the sample tube wall. In the case of the double TE₁₀₄ rectangular cavity, the insertion of the quartz Dewar: (i) into the same cavity, in which the sample is present, caused a direct “lens effect”, with ca. 1.8-fold increase of the EPR signal intensity; however, (ii) into the complementary cavity, in which the sample is absent, caused an indirect “lens effect”, with ca. 0.6-fold decrease of the EPR signal intensity. With the Dewar and sample in one cavity and a large empty sample tube in the complementary cavity, a concurrent (positive or negative) “lens effect” can be observed. Thus, the possible increase/decrease of the EPR signal intensity depends on the volume ratio of the quartz Dewar tube walls and large sample tube wall inserted into the double TE₁₀₄ rectangular cavity. Each of the above phenomena may be a significant source error in quantitative EPR spectrometry unless the samples to be compared in the quantitative EPR analysis are contained in sample tubes having the same wall thickness and each EPR spectra should be recorded inside an identical quartz Dewar.     

Active transient elasto-acoustic response damping of a thick-walled liquid-coupled piezolaminated cylindrical vessel

The linear 3D piezoelasticity theory in conjunction with the versatile transfer matrix approach and the wave equation for the internal acoustic domain are employed for active non-stationary vibroacoustic response control of an arbitrarily thick, tri-laminate, fluid-filled, simply supported, piezocomposite cylindrical tank, excited by arbitrary (non-axisymmetric) time-dependent on-surface mechanical loads. The smart structure is composed of a supporting core layer of functionally graded orthotropic material perfectly bonded to inner and outer spatially distributed radially polarized functionally graded piezoceramic sensor and uniform force actuator (FGPM) layers. Active vibration damping is implemented by transferring the accumulated voltage on the sensor layer to the piezoelectric actuator layer in context of proportional and derivative control laws. Durbin's numerical inverse Laplace transform scheme is utilized to calculate the time response histories of the relevant interface displacement/stress components, center-point acoustic pressure, and actuator voltage, for selected loading configurations (i.e., concentrated step, impulse, and moving external loads). Numerical simulations demonstrate the effectiveness of the adopted distributed sensing/actuation configuration together with the active damping control strategy in suppressing the vibroacoustic response of a three-layered (Ba₂NaNb₅O₁₅/Al/PZT4) water-filled piezoelastic cylindrical tank. Limiting cases are considered and the validity of results is established by comparison with the available data as well as with the aid of a commercial finite element package.     

一种不同地面分辨率图像的拼接算法

航空遥感监测中变焦镜头的广泛应用以及飞行高度的变化会获得不同地面分辨率的航空影像,因此为了实时监控到飞行区域的整体情况,需要对不同地面分辨率的图像进行拼接。提出了针对不同地面分辨率图像进行拼接的方法。首先用四分法对图像进行分割,检测变化倍率,选择配准策略;然后用基于加速鲁棒性特征(Speeded-Up Robust Features,SURF)的算法对相邻图像进行拼接。获得了焦距变化从高倍过渡到低倍,或从低倍过渡到高倍的拼接图像。通过航空变焦模拟影像的拼接实验和地面变焦影像的拼接实验表明,该方法能够对不同地面分辨率的图像进行拼接,且拼接结果均以高分辨率为基准。     

Ethylenically unsaturated polycarbosiloxanes for novel silicone hydrogels: synthesis,end‐group analysis,contact lens formulations,and structure–property correlations

A series of novel mono‐ethylenically unsaturated polycarbosiloxanes macromonomers as compatibilizer materials for soft silicon hydrogels were prepared from the anionic ring‐opening polymerization (AROP) of 2,2,5,5‐tetramethyl‐2,5‐disila‐1‐oxacyclopentane followed by methacrylation. The characterization was performed by end‐group analysis and included the determination of molecular weight, molecular weight distributions, end‐group functionality, and impurity profiles using gas chromatography‐mass spectrometry, gel permeation chromatography, nuclear magnetic resonance, and matrix‐assisted laser desorption/ionization time of flight mass spectrometry. The synthetic procedure was optimized to minimize the formation of any dimer that would have the potential to act as a low molecular weight cross linker. In addition, the novel di‐ethylenically unsaturated polycarbosiloxanes were synthesized by cationic polymerization. Use of these silicone derivatives was explored in the formulation of contact lenses, and the structure–property relationship was examined. When copoymerized with hydrophilic monomers, these were able to give transparent and wettable films with desired properties, particularly a low moduli for contact lenses. Contact lens with high modulus is often shown to impart a higher degree discomfort when worn upon the eye. It was clear from the structure–property relationship that the modulus and the tensile strength of the formulated material depend on the nature and length of the polycarbosiloxane used and may be tuned for the purpose as needed. Copyright © 2013 John Wiley & Sons, Ltd.     

An Ensemble Kalman Filter Approach Based on Level Set Parameterization for Acoustic Source Identification Using Multiple Frequency Information

In this paper, a reconstruction problem of the spatial dependent acoustic source from multiple frequency data is discussed. Suppose that the source function is supported on a bounded domain and the piecewise constant intensities of the source are known on the support. We characterize unknown domain by the level set technique. And the level set function can be modeled by a Hamilton-Jacobi system. We use the ensemble Kalman filter approach to analyze the system state. This method can avoid to deal with the nonlinearity directly and reduce the computation complexity. In addition, the algorithm can achieve the stable state quickly with the Hamilton-Jacobi system. From some numerical examples, we show these advantages and verify the feasibility and effectiveness.