Energy transfer rates and impact sensitivities of two classes nitramine explosives molecules

Some explosives are stable molecules with large energy barriers to chemical reaction, and in shock or impact initiation, a sizable amount of phonon energy must be converted to the molecular internal higher vibrations by multiphonon up pumping. To investigate the relationship between impact sensitivities and energy transfer rates, the number of doorway modes of explosive molecules is estimated by a simple theory in which the rate is proportional to the number of normal mode vibrations. We evaluated frequencies of normal mode vibrations of 13 explosive molecules which are CHNO nitramine-contained and have not been analyzed previously. The number of doorway modes in the regions of 200–700 cm⁻¹ was evaluated by the direct counting method. For more clear investigation of the relationship we have classified these 13 nitramine explosive molecules, by the number of nitramine group they contained, into two groups. There are eight molecules that contained one nitramine group and five molecules that contained poly-nitramine groups. It is found that the number of doorway modes shows a linearly correlation to the impact sensitivities derived from drop hammer tests. This result is in agreement with that of several previous works. Besides, it is also noted in our study that in those nitramine explosives molecules with similar molecular structure (similar number nitramine group they contained) and similar molecular weight, the correlation between the sensitivity and the number of doorway modes is higher. We found that the vibrational frequency of ω corresponds to nitro group motions of every molecule is contributed to the number of doorway modes in the regions of 200–700 cm⁻¹.     

Probing buried carbon nanotubes within polymer-nanotube composite matrices by atomic force microscopy

Multi-walled carbon nanotubes (MW-CNT) inside a polyamide-6 (PA6)-MW-CNT composite were visualized by atomic force microscopy (i) in a field-assisted intermittent contact and (ii) in the tunneling (TUNA) mode. Individual buried MW-CNTs were clearly discerned within the PA6 matrix. An average diameter of 33 ± 5 nm of the MW-CNTs was determined based on field-assisted intermittent contact mode AFM images, which is consistent with the expected size of PA6-coated MW-CNTs. Single well dispersed MW-CNTs that are located in the sub-surface region of the composite were also observed in the TUNA mode. These new AFM approaches circumvent the tedious sample preparation based on ultramicrotoming required for high resolution electron microscopy studies to obtain “in-depth” morphological information and hence are expected to facilitate the analysis of CNT-based and other nanocomposites in the future.     

Fast spatially localised electrooptical mode in vertically aligned nematic LCs with negative dielectric anisotropy

ABSTRACT

Electro-optical switching and the liquid crystal (LC) director distribution are studied in spatially periodic electric field for vertically aligned LC with negative dielectric anisotropy. Two electro-optical switching modes characterised by different switching times are observed. These modes are well distinguished optically by choosing proper geometry for the polarisers axes orientation. One of these modes is significantly faster as compared to the other. The fast switching is explained in terms of localised near-to-surface director reorientation. The 3D-numerical simulation shows very good agreement with the experiment: it points out the existence of the disclination lines and field-stabilised walls responsible for the localised director field switching and its relaxation. Possibilities of enhancing the fast mode for high-speed light modulators are discussed.     

白杨素-6-磺酸钠及其Zn(Ⅱ)、Ca(Ⅱ)配位化合物与NDA作用的研究

采用紫外、荧光、粘度法研究了白杨素-6-磺酸钠、白杨素-6磺酸双核锌及白杨素-6-磺酸四核钙与小牛胸腺DNA的结合常数分别是KNa=1.52×104L.mol-1、KZn=3.56×104L.mol-1和KCa=1.54×104L.mol-1。实验结果表明,白杨素-6-磺酸双核锌和白杨素-6-磺酸四核钙;白杨素-6-磺酸钠与DNA间的作用方主要为静电结合。     

旋转输液管动力稳定性理论分析北大核心CSCD

基于Lagrange原理和假设模态法建立了旋转输液管的动力学模型.通过降阶升维的方法求解系统的特征值问题,并分析了旋转输液管自由振动特性.得到了不同端部集中质量和转速下,系统特征值随流速升高的演变轨迹.揭示了临界流速随系统参数的变化规律.研究发现,内部流体的流动对旋转输液管动力学特性存在显著影响.在某些参数组合下,系统低阶模态能够形成不同形式的内共振关系.预示了旋转输液管模型蕴含丰富的动力学现象.     

基于简化的应变梯度理论下Kirchhoff板模型边值问题的提法及其应用北大核心CSCD

考虑应变梯度和速度梯度的影响,建立薄板控制微分方程及给出其边值问题的提法,修正了前人给出的薄板角点条件.采用Levy法,给出受分布力作用下简支板的挠度及自由振动频率的解析解.通过与文献中分子动力学数据对比,验证了该文模型的有效性并提出校核材料参数的一种方法.研究结果表明,增大弹性地基和应变梯度参数可以有效提高板的等效刚度,而速度梯度参数则相反.该文提出的板的边值问题为研究薄板在复杂支撑边界及外荷载等条件提供了理论依据.同时,有望为其有限元法、有限差分法和基于能量原理的Galerkin法等数值方法提供理论依据.     

价格与质量双重竞争下电商平台渠道模式决策研究

近年来传统电商正加速从经销商转变为连接消费者与供应商的在线市场中间商, 电商平台与供应商形成三种渠道结构:经销商模式、混合模式和在线市场模式。本文通过构建Stackelberg博弈模型讨论产品质量与价格双重竞争情境下电商平台与供应商销售合作模式最新选择问题。研究表明,当价格竞争强度适中而佣金比例较大时,混合模式是电商平台最优选择,此时产品质量差异最大;当价格竞争强度较小而佣金比例较大时,在线市场模式则是最优选择;在其他条件下,经销商模式是其最优选择。本文结论对电商平台与供应商合作模式选择、产品质量与定价决策具有参考价值。     

我国区域绿色技术创新效率的分类测度和提升模式研究——基于非期望产出的SBM-SupSBM模型

本文首先运用考虑非期望产出的SBM-SupSBM模型估计我国各省市绿色技术创新效率并进行分类:稳定上升类、平稳类、大幅度波动类以及下降类。之后从企业内部和外部两方面对绿色技术创新效率提升的影响因素提出假设,着重考虑大幅度波动类别省份的效率提升。运用面板数据模型各影响因素进行验证,结论显示:企业规模对绿色技术创新效率波动较大的省份起到显著的抑制作用,环境规制和技术进步对绿色技术创新效率波动较大的省份作用不明显。针对分析结果,提出结论:在提升绿色技术创新效率的过程中,应注重企业规模和技术进步的协同作用,以及技术的开放程度。     

Event-triggered sliding mode control for switched genetic regulatory networks with persistent dwell time

This paper focus on the event-triggered sliding mode controller design for discrete-time switched genetic regulatory networks (GRNs) with persistent dwell time (PDT) switching. Firstly, the observation error dynamics of switched GRNs with PDT is constructed in the light of event-triggered sliding mode control (SMC) scheme. Next, sufficient conditions are derived to ensure the exponential stability of the augmented plant. Moreover, an event-triggered SMC law is synthesized to impel the system trajectories onto the sliding surface in a finite time. Finally, a verification example is provided to illustrate the effectiveness and potential of the proposed method.     

碱性模式氢化物发生原子荧光光谱法测定铁矿石中砷

建立了碱性模式氢化物发生原子荧光光谱法测定铁矿石中砷的最佳仪器和实验条件。采用微波消解分解样品，在硫脲和L-半胱氨酸存在下将As（Ⅴ）还原为As（Ⅲ），以1mol／L KOH作为介质，以0．75mol／L H3PO4作为载流，原子荧光光谱法测定样品中的砷。方法检出限为0．35μg／L，RSD在2．0％。9．4％之间，加标回收率95％～103％。对标准样品进行分析验证，结果与标准值相符。应用于铁矿样品的测定，结果满意。