二极管激光侧泵浦单横模100Hz电光调Q激光器

介绍了二极管激光侧泵浦单横模１００Ｈｚ电光调Ｑ激光器的实验结果。泵浦源为一个线阵准连续１００Ｗ二极管激光器，激光工作介质为ＮｄＹＡＧ薄梯形板条，板条与泵浦源间用柱透镜耦合，ＫＤ＊Ｐ电光晶体调Ｑ。在１００Ｈｚ重复频率下，获得单脉冲能量２．３７ｍＪ，脉宽小于７ｎｓ，光束质量因子Ｍ２＝１．１的１．０６μｍ激光，光－光效率为８．５％，斜效率为１８．７％。     

双包层椭圆光波导解析解

解析求解了双包层椭圆光纤中的波动方程，得到了模式精确解有模式特征方程。对基模的特征方程进行了数值计算，给出了不同椭圆比下的归一化双折射和模间色散随归一化频率的变化关系曲线，并与高斯近似解的结果进行了比较。     

低噪音摩阻复台材料影响因素的探讨

采用动态粘弹谱仪（ＤＤＶ）、电子扫描显微镜（ＳＥＭ）和摩擦试验机等对影响摩阻复合材料制动噪音的因素进行了探讨。结果表明，摩阻材料基体的合理改性以提高其损耗角正切ｔａｎδ对减少振动、降低噪音行之有效。同时对传统解决噪音的方法，如添加固体润滑剂、橡胶共混等进行了分析比较。     

Effect of structural variation within cationic azo-surfactant upon photoresponsive function in aqueous solution

The cationic azo-surfactants possessing different spacers and tail alkyl chain lengths have been synthesized by azocoupling ofp-alkylaniline orop-ethoxyaniline with phenol, followed by alkylation and quaternalization with dibromoalkane and trimethylamine, respectively. These surfactants showed a good solubility in water. A reversibletrans-cis isomerization of the azosurfactants by photoirradiation was assessed by UV-Vis absorption spectra. Due to a difference in HLB between thetrans- andcis-surfactants, the observed critical micelle concentration (CMC) values and the electric conductivity of the surfactant solution at above the CMC were significantly affected by the photoinducedtrans-cis isomerization. The azo-surfactants bearing moderate alkyl chain lengths such as surfactants 6 (R₂=C₂H₄, R₃=C₄H₉) and 9 (R₂=C₄H₈, R₃=C₂H₅) were found to be effective to achieve large CMC changes (3.6 mmol/L for 6 and 5.9 mmol/L for 9) by UV-light irradiation. The replacement of the tail chain species also affected the photoresponsive function. The surfactant 12, possessingp-ethoxy group as the tail chain, was found to form a stable micelle aggregation as compared with the structurally related surfactant 10 having ethyl unit as its tail group, but it exhibited a large CMC change (5.3 mmol/L) by UV-light irradiation.     

小间隙高放大多丝室及其放电机制

对以强猝灭气体工作的小间隙多丝室及其放电机制进行了研究,实验表明,因为工作在饱和模式区,这种室同时具有很高的气体放大和相当快的时间特性.文中探讨了放电机制,雪崩中空间电荷效应以及电离光子的产生和作用是重要的因素,而其中后一因素又受到强猝灭气体的抑制.     

Stability analysis of abnormal multiplication of plankton using parameter identification technique

This paper presents the mathematical approach for the abnormal multiplication of plankton. An abnormal multiplication can be expressed as an unstable problem and the stability of the system is investigated by introducing eigenvalues of a mathematical equation. The stability of the system can be judged by an eigenvalue based on the Lyapunov's stability theory. In this paper, the Arnoldi‐QR method is used to obtain eigenvalues and eigenvectors of the system. The mode superposition method is employed to create spatial distribution needed to analyse the stability. To obtain the objective eigenvalue, the parameter identification technique is employed. The finite element method is used for the discretization in space. Lake Kasumigaura, which is located in Ibaraki Prefecture in Japan, is selected and actual data in 1975, 1976, 1991 and 2000 are used in order to investigate the stability of the specified lake in Japan. Copyright © 2004 John Wiley & Sons, Ltd.     

Geodesic Acoustic Mode in Toroidally Axisymmetric Plasmas with Non-Circular Cross Sections

The geodesic acoustic mode （GAM）, first predicted by Winsor, Johnson and Dawson in an attempt to explain some experimentally observed low frequency oscillations in stellarators, is a special electrostatic fluid mode with low mode number and coupled with the so-called geodesic curvature of a toroidally confined plasma. The recent on this mode are due to the close relevance of the stabi- lization of drift turbulence by both the zonal flow and the GAM. Previously, the GAM was illustrated in very simple geometries,     

Sterically stabilized emulsion polymerization of styrene: Pseudo‐semicontinuous approach

The sterically stabilized emulsion polymerization of styrene initiated by a water‐soluble initiator at different temperatures has been investigated. The rate of polymerization (R_p) versus conversion curve shows the two non‐stationary‐rate intervals typical for the polymerization proceeding under non‐stationary‐state conditions. The shape of the R_p versus conversion curve results from two opposite effects—the increased number of particles and the decreased monomer concentration at reaction loci as the polymerization advances. At elevated temperatures the monomer emulsion equilibrates to a two‐phase or three‐phase system. The upper phase is transparent (monomer), and the lower one is blue colored, typical for microemulsion. After stirring such a multiphase system and initiation of polymerization, the initial coarse polymer emulsion was formed. The average size of monomer/polymer particles strongly decreased up to about 40% conversion and then leveled off. The initial large particles are assumed to be highly monomer‐swollen particles formed by the heteroagglomeration of unstable polymer particles and monomer droplets. The size of the “highly monomer” swollen particles continuously decreases with conversion, and they merge with the growing particles at about 40–50% conversion. The monomer droplets and/or large highly monomer‐swollen polymer particles also serve as a reservoir of monomer and emulsifier. The continuous release of nonionic (hydrophobic) emulsifier from the monomer phase increases the colloidal stability of primary particles and the number of polymer particles, that is, the particle nucleation is shifted to the higher conversion region. Variations of the square and cube of the mean droplet radius with aging time indicate that neither the coalescence nor the Ostwald ripening is the main driving force for the droplet instability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 804–820, 2003     

正方分布的4×4单模光纤熔锥耦合器耦合特性分析

本文以线性耦合波方程为基础,采用散射矩阵的方法讨论了具有正方分布的4×4单模光纤熔锥形耦合器的耦合特性,并与实验作了比较,得到了比较一致的结果。     

Separation of piano keyboard vibrations into tonal and broadband components

A new method is presented for splitting musical notes into tonal and broadband components by removing the harmonic peaks from the spectra. This method was used to analyse the key vibrations of eight pianos (four grand and four upright). The broadband component of vibrations was found to be more intense in the upright pianos than in the grand pianos, while no such difference was found in the tonal component. As grands are considered to be superior to uprights, this suggests that it may be possible to improve upright pianos by reducing the strength of the broadband component of vibrations.