角锥棱镜谐振腔激光模式模拟研究

为了探究角锥棱镜谐振腔激光模式,以角锥-平面镜腔为例,将角锥棱镜等效为衍射光栅,考虑角锥镜棱宽在谐振腔中的衍射效应以及二面角误差引起的附加相位分布对谐振腔激光模式的影响,在光学谐振腔理论的基础上,建立了求解本征模式的理论分析模型.采用快速傅里叶法数值模拟不同腔长、角锥镜棱宽和二面角误差情况下该无源谐振腔激光输出模式分布情况.结果表明,在腔长30 cm、角锥镜棱宽小于75μm、二面角误差在-10′~5′之间时,可实现光斑完整的圆形分布输出模式,且有较好的光束质量;棱宽不小于0.4 mm,二面角误差在-40′~10′之间时,光斑为TEM 03阶横模,光场呈六瓣分布;当角锥镜棱宽为0.4 mm、二面角误差为3′,腔长从30~90 cm范围内增加时,该谐振腔输出的激光模式从TEM 03转换成TEM 10.     

基于演化博弈的公共交通、共享汽车与私家车的博弈分析

出行者的选择行为分析是交通系统中的一项重要内容,随着城市的发展,交通出行方式大体分为三大类:公共交通出行、辅助公共交通出行和私人交通出行。本文在以往的研究基础上,采用演化博弈的方法研究公共交通、共享汽车以及私家车三者之间的博弈关系,模拟出行者的选择行为,分析博弈均衡点稳定性及参数条件。通过模型仿真实验,演化结果中各项比例大小取决于各项收益、补贴、损失以及额外收益,要增加公共交通的配套设施,增收拥堵费以及增加对共享汽车的补贴及配套服务。     

基于ANP法的股权激励模式选择研究

本文对企业如何科学合理地选择股权激励模式问题进行研究探讨。不仅考虑到以往研究中的企业特征因素,同时也考虑了激励对象特征因素和外部实施环境因素,建立股权激励模式选择指标体系,并分析各指标间的依存关系,基于此构建了ANP网络结构模型,并选取两个代表性样本企业进行算例验证和应用,最终使得不同企业可根据自身的实际情况选择合适的股权激励模式,验证了该模型的合理性与可行性。     

An improved algorithm for the shallow water equations model reduction: Dynamic Mode Decomposition vs POD

We propose an improved framework for dynamic mode decomposition (DMD) of 2‐D flows for problems originating from meteorology when a large time step acts like a filter in obtaining the significant Koopman modes, therefore, the classic DMD method is not effective. This study is motivated by the need to further clarify the connection between Koopman modes and proper orthogonal decomposition (POD) dynamic modes. We apply DMD and POD to derive reduced order models (ROM) of the shallow water equations. Key innovations for the DMD‐based ROM introduced in this paper are the use of the Moore–Penrose pseudoinverse in the DMD computation that produced an accurate result and a novel selection method for the DMD modes and associated amplitudes and Ritz values. A quantitative comparison of the spatial modes computed from the two decompositions is performed, and a rigorous error analysis for the ROM models obtained is presented. Copyright © 2015 John Wiley & Sons, Ltd.     

任意高差的多档输电线动刚度理论建模

针对目前多档输电线动力特性研究中存在的不足,将任意一档导线视为子结构并基于现有的索振动理论获得了其动张力;利用相邻两档导线的动张力建立了悬垂绝缘子串绕其悬挂点摆动的动力学方程;综合每一档导线的振动方程以及悬垂绝缘子串的摆动方程建立了两档及三档输电线的动力学方程,求解得到由端部位移激励产生的动刚度;通过对动刚度进行分析得到了多档输电线的固有频率以及模态的理论表达形式;建立了小高差的两档及三档导线的有限元模型,理论分析结果与有限元结果一致,验证了理论公式的正确性。本文提出的动刚度理论对于研究多档输电线的动态响应具有重要的应用价值。     

激光雷达扫描方式

为实现激光束对空域的有效扫描和探测,研究了栅形扫描、李萨茹形扫描、螺旋形扫描和六边形扫描四种常见的激光雷达扫描方式,推导了相应的扫描方程,讨论了参数的物理意义及调整方法;重点研究了栅形扫描和六边形扫描方式下光斑的分布情况,通过仿真分析了两种扫描方式下光束的漏扫率和重叠率,结果表明,在相同扫描条件下六边形扫描方式的漏扫区域最少。展示了基于上述研究内容的扫描控制系统实物图及扫描图案。分析总结了四种扫描方式的特点,给出了每种扫描方式的适用情况及使用建议。     

On the use of edge cracked short bend beam specimen for PMMA fracture toughness testing under mixed-mode I/II

In this paper an inclined edge cracked short beam specimen subjected to symmetric three-point bend loading was designed and examined for conducting mixed-mode I/II fracture toughness experiments. The aspect ratio (i.e. length to width ratio) and the loading span distance are considered much lower than the other conventional cracked bend beam samples. Crack tip parameters such as stress intensity factors and T-stress were computed numerically for this specimen by several finite element analyses and it was demonstrated that the specimen is able to produce full combinations of mode I and II including pure mode II. The practical capability of the short bend beam specimen was studied experimentally by conducting a set of mixed-mode fracture tests on PolymethylMethacrylate (PMMA) as a well-known model brittle material. The critical stress intensity factors, the direction of fracture kinking and the path of fracture trajectory were investigated both experimentally and theoretically using two stress and strain-based fracture criteria. The fracture toughness of tested PMMA was decreased by moving towards mode II case due to the effect of T-stress on the fracture mechanism of the short bend beam specimen.     

吉林大学化学本科与研究生贯通式创新型人才培养模式

吉林大学化学学院秉持立德树人的根本任务,以“厚基础、重实践、严要求”为理念,探索了改革开放后具有吉大特色的本科与研究生贯通创新型人才培养模式。以先进的教学科研理念、雄厚的师资队伍、完善的人才培养体系、优质的平台支撑为基础,培养了一大批杰出的化学家,为我国化学领域的教育事业和科学研究奠定了深厚的基础,成为培养高素质化学人才的一方沃土。     

Comments on “Fuzzy fractional order sliding mode controller for nonlinear systems” [Commun Nonlinear Sci Numer Simulat 15 (2010) 963-978]

The aim of this note is to point out some comments to the article [Delavari H, Ghaderi R, Ranjbar A, Momani S. Fuzzy fractional order sliding mode controller for nonlinear systems, Commun Nonlinear Sci Numer Simulat 15 (2010) 963-978].     

Coherent electron transport in a helical nanotube

The quantum dynamics of carriers bound to helical tube surfaces is investigated in a thin-layer quantization scheme. By numerically solving the open-boundary Schrödinger equation in curvilinear coordinates, geometric effect on the coherent transmission spectra is analysed in the case of single propagating mode as well as multimode. It is shown that, the coiling endows the helical nanotube with different transport properties from a bent cylindrical surface. Fano resonance appears as a purely geometric effect in the conductance, the corresponding energy of quasibound state is obviously influenced by the torsion and length of the nanotube. We also find new plateaus in the conductance. The transport of double-degenerate mode in this geometry is reminiscent of the Zeeman coupling between the magnetic field and spin angular momentum in quasi-one-dimensional structure.