One injection for one-week controlled release: In vitro and in vivo assessment of ultrasound-triggered drug release from injectable thermoresponsive biocompatible hydrogels

Episodic release of bioactive compounds is often necessary for appropriate biological effects under specific physiological conditions. Here, we aimed to develop an injectable, biocompatible, and thermosensitive hydrogel system for ultrasound (US)-triggered drug release. An mPEG-PLGA-BOX block copolymer hydrogel was synthesized. The viscosity of 15 wt% hydrogel is 0.03 Pa*s at 25 °C (liquid form) and 34.37 Pa*s at 37 °C (gel form). Baseline and US-responsive in vitro release profile of a small molecule (doxorubicin) and that of a large molecule (FITC-dextran), from the hydrogel, was tested. A constant baseline release was observed in vitro for 7 d. When triggered by US (1 MHz, continuous, 0.4 W/cm²), the release rate increased by approximately 70 times. Without US, the release rate returned to baseline. Baseline and US-responsive in vivo release profile of doxorubicin was tested by subcutaneous injection in the back of mice and rats. Following injection into the subcutaneous layer, in vivo results also suggested that the hydrogels remained in situ and provided a steady release for at least 7 d; in the presence of the US-trigger, in vivo release from the hydrogel increased by approximately 10 times. Therefore, the mPEG-PLGA-BOX block copolymer hydrogel may serve as an injectable, biocompatible, and thermosensitive hydrogel system that is applicable for US-triggered drug release.     

Assessment of the beneficial combination of electrochemical and ultrasonic activation of compounds originating from biomass

The electro-oxidation of organic molecules at the anode with simultaneous generation of hydrogen at the cathode in electrosynthesis reactors is considered as a promising and efficient process for the co-production of hydrogen and bio-sourced value-added chemicals. In this study and for the first time, we investigated the electro-oxidation of glucose and methylglucoside in 0.1 mol L⁻¹ NaOH on polycrystalline Pt (real surface area = 14.5 ± 0.5 cm², roughness ≈ 5) in the potential range [0; +1.20 V vs. rhe] under silent and ultrasonic (bath, 45 kHz, P_acous = 11.20 W) conditions. A series of linear sweep voltammograms, chronoamperograms and high-performance liquid chronoamperograms were generated. It was found that higher current densities were obtained under ultrasonic conditions over the potential range of +0.25 V to +1.10 V vs. rhe, indicating that higher oxidation rates were provided under ultrasonication. It was observed that the desorption of species from the Pt surface in the medium potential region was favoured, allowing free catalytic Pt sites for further adsorption and oxidation of reactants; and in the high potential region, high peak current densities in the presence of ultrasound was due to enhanced mass transport of the electroactive species from the bulk electrolyte to the Pt-polycrystalline electrode surface. HPLC studies confirmed that higher electrochemical activity was obtained in the presence of ultrasound than in the absence. In our conditions, it was also found that low frequency ultrasound did not change the selectivity of the glucose and methylglucoside electro-oxidation reactions but instead, a significant increase in the rate of conversion was observed.     

A tribute to professor Robert West,on the occasion of his 90th birthday

Abstract

This is for Bob, and for his vast number of friends and colleagues who wish to celebrate his 90^th birthday. On this occasion we express our admiration, friendship, and appreciation for the wonderful adventures that he has shared with so many of us. While we are limited to providing a personal account of our experience of Bob, we believe that what we describe will in some way resonant with those who know him. Not surprisingly, the life of a great person is dedicated to all possible kinds of movement (mentally and physically) always curious and ready to find out what future brings rather than looking back upon the past. Needless to say – Bob moves quickly. Very quickly. So we will not pretend that we, or anyone else, could capture the essence of the man. As much as he immerses himself in the moment, it seems a losing proposition to try to identify something singular and unchanging about him. As Heraclitus says “we can never step into the same river twice,” so has been our experience, and delight, with Bob. It is our hope that many other accounts of Bob will be told and retold during the events celebrating his 90^th birthday.     

The effect of high power airborne ultrasound and microwaves on convective drying effectiveness and quality of green pepper

The effectiveness of hybrid drying based on convective drying with application of ultrasound and microwave enhancement is the main subject of the studies. The drying kinetics, energy consumption as well as the quality aspect of green pepper is analysed. It was shown that hybrid drying methods shorten significantly the drying time, reduce the energy consumption and affect positively the quality factors. Each of the analysed aspects depend on combination of the convective-ultrasound-microwave drying programs. Besides, based on the drying model elaborated earlier by one of the authors, the effects of ultrasound on convective drying assessed by such phenomena as “heating effect”, “vibration effect” and “synergistic effect” are presented.     

Hydrqalumination of Diphenylacetylene

It was found that diphenylacetylene reacts at 55[ddot]C with i-Bu₂AlH to form cis-vinylalane. On the other hand, i-Bu₂AlH adds mostly in anti-manner to diphenylacetylene at 110[ddot] C.     

Numerical simulation of the red blood cell aggregation and deformation behaviors in ultrasonic field

The objective of this paper is to propose an immersed boundary lattice Boltzmann method (IB-LBM) considering the ultrasonic effect to simulate red blood cell (RBC) aggregation and deformation in ultrasonic field. Numerical examples involving the typical streamline, normalized out-of-plane vorticity contours and vector fields in pure plasma under three different ultrasound intensities are presented. Meanwhile, the corresponding transient aggregation behavior of RBCs, with special emphasis on the detailed process of RBC deformation, is shown. The numerical results reveal that the ultrasound wave acted on the pure plasma can lead to recirculation flow, which contributes to the RBCs aggregation and deformation in microvessel. Furthermore, increasing the intensity of the ultrasound wave can significantly enhance the aggregation and deformation of the RBCs. And the formation of the RBCs aggregation leads to the fluctuated and dropped vorticity value of plasma in return.     

Study and optimization of the ultrasound-enhanced cleaning of an ultrafiltration ceramic membrane through a combined experimental–statistical approach

Membrane fouling is one of the main drawbacks of ultrafiltration technology during the treatment of dye-containing effluents. Therefore, the optimization of the membrane cleaning procedure is essential to improve the overall efficiency. In this work, a study of the factors affecting the ultrasound-assisted cleaning of an ultrafiltration ceramic membrane fouled by dye particles was carried out. The effect of transmembrane pressure (0.5, 1.5, 2.5 bar), cross-flow velocity (1, 2, 3 m s⁻¹), ultrasound power level (40%, 70%, 100%) and ultrasound frequency mode (37, 80 kHz and mixed wave) on the cleaning efficiency was evaluated. The lowest frequency showed better results, although the best cleaning performance was obtained using the mixed wave mode.A Box–Behnken Design was used to find the optimal conditions for the cleaning procedure through a response surface study. The optimal operating conditions leading to the maximum cleaning efficiency predicted (32.19%) were found to be 1.1 bar, 3 m s⁻¹ and 100% of power level.Finally, the optimized response was compared to the efficiency of a chemical cleaning with NaOH solution, with and without the use of ultrasound. By using NaOH, cleaning efficiency nearly triples, and it improves up to 25% by adding ultrasound.     

Facile fabrication of pomponlike microarchitectures of lanthanum molybdate via an ultrasound route

Pomponlike La₂(MoO₄)₃ microstructures assembled with single-crystalline nanoflakes have been facilely fabricated via a surfactant-assisted ultrasound route for the first time. Various synthesis conditions were examined, such as the surfactant concentration, the molecular structure of surfactants, and the pH value. The obtained pomponlike microstructures were characterized by X-ray diffraction (XRD), (field-emission) scanning electron microscopy [(FE)SEM], transmission electron microscopy (TEM), and nitrogen adsorption/desorption isotherms. It has been revealed that a minimum concentration of sodium dodecylsulfate (SDS) was required for the formation of pomponlike La₂(MoO₄)₃ microstructures. When the SDS concentration is above 0.02 mol L⁻¹, the pomponlike microstructures become more perfect, and the size is also increased with the increasing SDS concentration. Under the same sonication, similar pomponlike microstructures were obtained when a cationic surfactant, cetyltrimethyl ammonium bromide (CTAB), was used instead of the anionic surfactant SDS, indicating that the hydrophobic alkyl chains are an important factor for the formation of the pomponlike La₂(MoO₄)₃ microstructures. It is also found that the pomponlike La₂(MoO₄)₃ microstructures can only be obtained within an optimal pH range of 8.0–9.0 under sonication. Based on TEM, Fourier transform infrared spectroscopy (FT-IR) and solubilization experiment, a formation mechanism of pomponlike La₂(MoO₄)₃ microstructures was proposed, in which the collaborative action of surfactants and sonication plays a key role. Furthermore, the porosity of the pomponlike La₂(MoO₄)₃ microstructures were discussed.     

Acid-induced gelation behavior of sonicated casein solutions

Casein gels were made from solutions sonicated by 24 and 130 kHz ultrasounds for 0, 60 and 120 min, followed by acidification with glucono-δ-lactone at 30 °C. The dynamics of gel formation were studied using rheological methods and microstructure of gels was monitored using scanning electron microscopy. Sonication postponed the gelation point to a lower pH value and increased the elasticity of freshly formed gels. It also resulted in gels with a more interconnected structure and smaller non-distinguishable particulates. This structure was especially dominant for the gel made from the solution already sonicated for 120 min.