Sulfur removal from bauxite water slurry (BWS) electrolysis intensified by ultrasonic

Effects of ultrasonic on desulfurization ratio from bauxite water slurry (BWS) electrolysis in NaOH solution were examined under constant current. The results indicated that ultrasonic improved the desulfurization ratio at high temperatures because of the diffusion and transfer of oxygen gas in electrolyte. However, due to the increase in oxygen gas emission, ultrasonic could not improve the desulfurization ratio obviously at low temperatures. Additionally, the particle size of bauxite became fine in the presence of ultrasonic, indicating that the mass transfer of FeS₂ phase was improved. According to the polarization curves, the current density increased in the presence of ultrasonic, indicating that the mass transfer of liquid phase was improved. The apparent activation energy (AAE) of electrode reaction revealed that ultrasonic did not change the pathway of water electrolysis. However, ultrasonic changed the pathway of BWS electrolysis, converting indirect oxidation into direct oxidation. The AAE of BWS electrolysis in the presence of ultrasonic was higher than that in the absence of ultrasonic. And the low AAEs (less than 20 kJ/mol) clearly indicated the diffusion control during BWS electrolysis reaction.     

Opportunities and Challenges in the Use of TiO2 Nanoparticles Modified with Citric Acid to Synthesize Advanced Nanocomposites Based on Poly(amide-imide) Containing N,N′-(Pyromellitoyl)-bis-L-leucine Segments

In this study, the goal was the preparation, characterization, and surface morphology of poly(amide-imide)/TiO₂-citric acid nanocomposites (PAI/TiO₂-CA NCs). Owing to the high surface energy and tendency for agglomeration, the surface of TiO₂ nanoparticles was modified with citric acid. Then poly(amide-imide) was synthesized by direct polycondensation reaction of N,N′-(pyromellitoyl)-bis-L-leucine diacid with 4,4′-diaminodiphenylmethane by triphenyl phosphite and tetra-n-butylammonium bromide as a green medium. The attained polymer and modified TiO₂ nanoparticles were used to prepare PAI/TiO₂-CA NCs through ultrasonic irradiation. The resulting PAI/TiO₂-CA NC was characterized with FT-IR spectroscopy, X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis.     

Ultrasound-promoted,rapid, green,one-pot synthesis of 2′-aminobenzothiazolomethylnaphthols via a multi-component reaction,catalyzed by heteropolyacid in aqueous media

A one-pot, three-component condensation reaction of 2-aminobenzothiazole, 2-naphthol and appropriate aldehydes catalyzed by heteropolyacid (HPA) in an aqueous medium afforded the Mannich adduct 2′-aminobenzothiazolomethylnaphthols at 45 °C under ultrasound irradiation. This method provides several advantages such as simple work-up procedure, short reaction time and high yields.     

The effects of ultrasound frequency and power on the activation energy in Si-KOH reaction system

The activation energy is the minimum amount of energy required to initiate a reaction. It is one of the important indexes for appraising a reaction. The chemical reaction rate is closely related to the value of activation energy, and reducing activation energy is propitious to promoting a chemical reaction. In the present paper, the relationship between the activation energy in Si-KOH reaction system and the ultrasound frequency and power has been discussed for the first time. The range of ultrasound frequency and power is 40-100kHz （interval by 20kHz） and 10-50W （interval by 10W）, respectively. The experimental clata indicate that the activation energy decreases with the increasing ultrasound power. Comparing with the activation energy without ultrasound irradiation, the results in our paper indicate that ultrasound irradiation could reduce the activation energy in Si-KOH reaction system and increase the reaction rate.     

Sonochemical synthesis,formation mechanism,and solar cell application of tellurium nanoparticles

Tellurium inherently tends to form 1-D structures and while the 0-D Te nanostructures have better properties and applications in solar cell. In the present study, 0-D Te nanostructures including rice-like and spherical nanoparticles with the particle size of 15–40 nm were successfully synthesized via a facile sonochemical method. In the absence of ultrasonic irradiation nanorods were produced while performing the reaction under ultrasonic waves (at 200 W for 30 min) led to the formation of nanoparticles. Finally, the efficiency of various as-synthesized Te nanostructures in quantum dot-sensitized solar cells (QDSSCs) were evaluated. Using rice-like nanoparticles led to increase in J_SC, V_OC, FF and η parameters from 1.22, 0.54, 0.49 and 0.32% to 1.57, 0.64, 0.63 and 0.63%, respectively, compared with nanorods.     

Non-contact evaluation of the resonant frequency of a microstructure using ultrasonic wave

This paper presents a novel non-contact method for evaluating the resonant frequency of a microstructure, Firstly, the microstructure under test is excited by ultrasonic waves. This excitation method does not impose any undefined load on the specimen like the electrostatic excitation and also this is the first actual use of ultrasonic wave for exciting a microstructure in the literature. Secondly, the amplitudes of the microstructure are determined by image edge detection using a Mexican hat wavelet transform on the vibrating images of the microstructure. The vibrating images are captured by a CCD camera when the microstructure is vibrated by ultrasonic waves at a series of discrete high frequencies （〉30 kHz）. Upon processing the vibrating images, the amplitudes at various excitation frequencies are obtained and an amplitude-frequency spectrum is obtained from which the resonant frequency is subsequently evaluated. A micro silicon structure consisting of a perforated plate （192 × 192 μm） and two cantilever beams （76 × 43 μm） which is about 4 μm thickness is tested. Since laser interferometry is not required, thermal effects on a test object can be avoided. Hence, the setup is relatively simple. Results show that the proposed method is a simple and effective approach for evaluating the dynamic characteristics of microstructures.     

Ultrasonic‐Assistance and Aging Time Effects on the Zeolitation Process of BZSM‐5 Zeolite

The isomorphic substitution of boron into ZSM‐5 zeolite under static hydrothermal condition was investigated. Evaluation of hydrothermal synthesis of BZSM‐5 was performed by treating the synthesis mixture by different aging processes, namely, ultrasonic, static, stirring, and microwave‐assisted aging prior to the conventional hydrothermal treatment. The synthetic processes with different techniques of aging prior to the onset of conventional hydrothermal crystallization were compared with a process without any prior aging. The obtained results showed that the ultrasonic and microwave assisted aging shortened the crystallization time and altered the crystal size and the morphology of the obtained products. The characteristics of the synthesized products were obtained by FT‐IR spectroscopic, XRD and SEM techniques.     

南下访“淇淇”

介绍甸独遥长江淡水白暨豚“淇淇”及其同种的发声和听觉的特性,包括它们所发射超声信号（的答声）和可听声信号（哨叫声）以及它们的听觉区域,也介绍了白暨豚当前频临灭绝的处境 。     

Elastic constants of lead-bismuth alloys

A study of ultrasonic velocities and internal friction has been carried out in Pb-Bi alloys in the concentration range of 0 to 49.5 atomic % Bi using the composite oscillator technique. From the velocity and density data a set of elastic constants namely, Young’s modulus, rigidity modulus, bulk modulus and Poisson’s ratio are estimated. The results are interpreted in terms of the phase changes occurring in the alloy system. Internal friction is found to be more sensitive than the elastic constants to the phase changes.     

Hydrogen peroxide bleaching of cotton in ultrasonic energy

It is well known that, conventional hydrogen peroxide bleaching process is an important and a specific step for wet processors; however it has some problems such as long time, high energy consumption. On the other hand, using ultrasonic energy in bleaching is an alternative method for the conventional processes.

In this work, 100% cotton materials of different forms such as raw fibre, ring-spun yarns and knitted fabrics produced from these cottons, were treated with hydrogen peroxide in two different concentrations (5 mL/L and 10 mL/L), at three different temperatures (20 °C, 30 °C, 40 °C) and times (20 min, 30 min, 60 min). Whiteness Index of the samples were then measured spectrophotometrically and the overall results were compared.