A maximum-efficiency-first multi-path route selection strategy for optical burst switching networks

In this paper, the impact of a path selection on other existing paths in optical burst switching (OBS) networks is studied by analyzing the contention among different traffic streams and the interaction between the route selection and traffic load balance. The results show that there exists a mutual reinforcement interaction among the traffic load of a path, the path burst loss ratio and the contention ability of the path when burst loss ratio based multi-path selection strategies are adopted, which may increase the unbalance of traffic and lead to severe congestion further. A maximum-efficiency-first multi-path selection strategy, which considers the performance of the burst flows and the impact of a path selection on existing OBS paths at the same time by a combined metric of route efficiency, is proposed to maximize the utility of the burst flows and minimize the increment of lost throughput on the path. The performance of the proposed multi-path selection strategy is evaluated through simulation. The results show that the presented strategy obviously outperforms the least burst loss ratio strategy and shortest path first strategy in terms of the burst loss ratio in the practical unbalanced background traffic, especially when the network is heavily loaded.     

Classical Backfitting for Smooth-Backfitting Additive Models

Smooth backfitting has been shown to have better theoretical properties than classical backfitting for fitting additive models based on local linear regression. In this article, we show that the smooth backfitting procedure in the local linear case can be alternatively performed as a classical backfitting procedure with a different type of smoother matrices. These smoother matrices are symmetric and shrinking and some established results in the literature are readily applicable. The connections allow the smooth backfitting algorithm to be implemented in a much simplified way, give new insights on the differences between the two approaches in the literature, and provide an extension to local polynomial regression. The connections also give rise to a new estimator at data points. Asymptotic properties of general local polynomial smooth backfitting estimates are investigated, allowing for different orders of local polynomials and different bandwidths. Cases of oracle efficiency are discussed. Computer-generated simulations are conducted to demonstrate finite sample behaviors of the methodology and a real data example is given for illustration. Supplementary materials for this article are available online.     

Toward computational design of efficient plasticizers for nylon

Polyamides are semi‐crystalline polymers useful in a wide range of applications in the plastics industry. Some applications require higher flexibility and workability of the polyamides. Therefore, plasticizers are added to ease compounding and processing procedures and produce the desired product properties. The goal of the present study was to use computational tools to estimate plasticizer efficiency in plasticizing nylon 66/6. It is known that plasticizer efficiency is greatly influenced by structural effects of the plasticizer and the nature of the polymer, and therefore in this research, a systematic study is reported to explore these factors. A homology series of esters of 4‐hydroxybenzoate with various chain lengths of the alcohol moiety was examined. Also, the efficiency of linear plasticizers was compared to branched ones and stereoisomers were considered. Plasticizer efficiency was determined by calculating cohesive energy density (CED), solubility parameters, free volume and interaction intensities of pristine nylon and the nylon–plasticizer blends. It was found that plasticizer efficiency of esters with linear alcohol moiety is higher than branched chains. Whereas plasticizer efficiency increases when the branched side chain is more bulky, no coherent trend was observed for the linear side chain of the alcohol moiety. Surprisingly, a significant difference was observed between the pair of enantiomers. The most efficient plasticizer of the eight examined was the chiral molecule (R)‐2‐Methylbutyl‐4‐Hydroxybenzoate (R‐MB4HB), increasing the free volume of the nylon by 60‐fold (3‐fold greater than the original Methyl 4‐Hydroxybenzoate (M4HB)). Copyright © 2013 John Wiley & Sons, Ltd.     

Beiträge der Radiotracertechnik zur Rationalisierung einer großtechnischen Anlage zur Caprolactamproduktion

This paper reviews ways in which radioactive tracer techniques can he used to improve the efficiency of a caprolactam production plant, Residence time spectra and material distributions in different parts of the plant were measured by application of sodium 24, bromine 82 and technetium 99m. The investigations led to improved cumeneoxidators and gave useful informations on the catalytic decomposition of the phenolic tar and the hydrogenation process of phenol. It could he shown that the construction of the lactam extractor must he varied and the results of the tracerexperiments made in the distillation unit contributed to a higher quality of the final product.     

Characterization and Bioavailability of Vitamin C Nanoliposomes Prepared by Film Evaporation-Dynamic High Pressure Microfluidization

Vitamin C nanoliposomes were prepared by combining a conventional method (film evaporation) with dynamic high pressure microfluidization. Their physicochemical characterizations (antioxidant activity, particle size, entrapment efficiency, morphology, in vitro drug release, and storage stability) and skin permeation behavior were investigated. The results showed that vitamin C nanoliposomes, having equivalent DPPH (2, 2-diphenyl-1-picrylhydrazyl) free radical scavenging capacity of pure vitamin C solution without loss of their biological activity, exhibited better storage stability at 37°C for 24 hours and at 4°C for 60 days, a more excellent sustained drug release as well as higher skin penetration rate than vitamin C liposomes.     

Effect of the Cu co-activator on the charge-carrier trapping efficiency in CaSO4:Tm,Cu

Rare earth doped CaSO₄ materials are well known thermoluminescent dosimeters with friendly properties. They are used in the practice for a long while. New phosphors based on CaSO₄:Tm were synthesized using a modified preparation method for adding Cu as co-dopant. The produced materials have several favorable new characteristics. Larger linear dose response range, simpler glow-curve structure and a small diminution in the sensitivity are the consequences of the copper addition. Trapping efficiency of samples containing different amounts of Tm and Cu was investigated as the function of the composition using a consecutive RL/TL measuring technique. It was cleared up that the Cu addition, depending on its amount, reduced this value. This plays the main role in the sensitivity loss and forms one of the factors in the explanation of the linear dose range widening.     

Real‐Time Measurement of the Size Distribution of Diesel Exhaust Particles using a Portable 4‐stage Electrical Low Pressure Impactor

For this study, a 4 stage electrical low pressure impactor was designed to measure the real‐time size distribution of diesel particulate matter (DPM). For the performance evaluation, sodium chloride (NaCl) particles and dioctyl sebacate (DOS) particles were used. After evaluating the collection efficiency of each stage of the impactor, the size distributions of test particles were estimated using electrical current data and their inversion algorithm, and this was found to agree with the results obtained by a scanning mobility particle sizer (SMPS). For measurement of DPM, a common‐rail direct injection (CRDI) diesel engine, for engine speeds of 1,200 rpm and 1,500 rpm at 2.7 kgf·m, was used. Therefore, it was found that the size distribution of the DPM could be easily obtained, with the currents measured by the impactor and the data inversion algorithm, in less than 5 seconds. Furthermore, the effective density of the DPM could be obtained using the calculated results and the SMPS data.     

Cyclic Acetal-Photosensitized Polymerization. 9. Photopolymerization of Triallylidene Sorbitol

Abstract

The photopolymerization of triallylidene sorbitol (TAS) was carried out in benzene at 40°C without the usual initiator. The polymerization of TAS was found to be initiated with the ester radical generated via the acetal radical from TAS by means of photoirradiation. The rate of polymerization and the molecular weight of polymer were small due to the degradative chain transfer, It was kinetically investigated from the standpoints of the degradative chain transfer by the allylidene group and the cyclization by three double bonds. The following results were obtained: (1) The relation between the rate of polymerization, R_p, the monomer concentration, [M], could be expressed by [M] /R_p = (A[M] + B)/(3[M] + C), where A, B, and C were constant; (2) the ratio of the rate constant of unimolecular cyclization to the total rate constant of bimolecular propagation and the chain transfer of uncyclized radical was estimated to be 3.0 mol/dm³. A small amount of cyclopolymerization took place.     

Photovoltaic Cells Involving the Nonconjugated Conductive Polymer Iodine-Doped Styrene-Butadiene-Rubber (SBR)

Novel photovoltaic cells involving a nonconjugated conductive polymer have been fabricated using titanium dioxide/doped styrene-butadiene-rubber/carbon on ITO coated PET substrates. Photocurrents and photo-voltages for different intensities of light (emission at 300–700 nm) have been measured. These cells have shown significantly higher photocurrents and photo-voltages compared to previous reports. A photocurrent density of about 0.25 mA/cm² and a photo-voltage of 0.74 V have been measured for a light intensity of ～4 mW/cm².