Dependence of dielectric,ferroelectric, and piezoelectric properties on crystalline properties of p(VDF‐co‐TrFE) copolymers

Thermal processing at various temperatures has been used to fabricate poly(vinylidene fluoride‐co‐trifluoroethylene) [P(VDF‐co‐TrFE)] films with varied crystalline properties in an attempt to improve their piezoelectric properties. Although the dielectric constant of the films annealed at higher temperature is smaller than that of cooled and quenched ones, it has been shown that the annealed films possess larger crystallinity and stacked lamellar crystal grain size. The ferroelectric domains deriving from crystal region in all the samples are effectively improved by hot polarization. As a result, the remnant polarizations (P_r) and coercive electric field (E_c) of the corresponding films are improved at a low frequency due to the response of dipoles in crystal phase, and the largest piezoelectric constant in the longitudinal thickness mode (d₃₃=?25 pC/N) is obtained in an annealed copolymer film. The results illustrate improving the crystal structure of P(VDF‐co‐TrFE) is an effective way to realize high electromechanical properties, which provides broadly applied scenery for this kind of copolymer in piezoelectric components. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Hybrid inorganic–organic poly(carborane‐siloxane‐arylacetylene) structural isomers with in‐chain aromatics: Synthesis and properties

Structural isomers of thermo‐oxidatively stable poly(carborane‐siloxane‐arylacetylene) (PCSAA), namely, m‐PCSAA and p‐PCSAA, were synthesized by the reaction of the dimagnesium salts of m‐diethynylbenzene or p‐diethynylbenzene with 1,7‐bis(chlorotetramethyldisiloxyl)‐m‐carborane. The developed polymers have exceptional thermo‐oxidative properties similar to their diacetylene counterpart poly(carborane‐siloxane‐acetylene), PCSA. Thermal treatment of either of the PCSAAs results in a fully crosslinked thermoset by 500 °C resulting from the cycloaddition reactions involving the acetylene and aryl functionalities and subsequent formation of bridging disilylmethylene entities as discerned from Fourier transform infrared, ¹³C and ²⁹Si solid‐state NMR, and XPS studies. X‐ray diffraction analysis revealed that the thermosets obtained from p‐PCSAA possess enhanced crystallinity when compared to that obtained from m‐PCSAA possibly due to more efficient packing interactions of the p‐diethynylbenzene groups during thermoset formation. The presence of the aryl groups in the backbone of the PCSAAs' chains appeared to have enhanced the storage and bulk moduli of their thermosets when compared to the thermoset of PCSA. Dielectric studies of m‐PCSAA and p‐PCSAA revealed segmental relaxation peaks, α, above their glass transition temperatures with p‐PCSAA exhibiting a broader peak with a slower relaxation rate than m‐PCSAA. © 2013 Wiley Periodicals, Inc.^? J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2638–2650     

Study on properties of flame‐retardant cyanate esters modified with DOPO and triazine compounds

Ternary flame‐retardant modified cyanate ester blends (CEPG and CEPA) are formed by combining triazine compounds (TGIC or TAIC) and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide with cyanate ester resin. The curing behaviors, thermal and mechanical properties, and the flame‐retardant properties are investigated. The results show that the CEPG and CEPA blends result in lower curing temperatures and glass transition temperatures than those of neat CE. Both of CEPG and CEPA blends significantly improve the flame‐retardant properties of CE resins, and UL‐94V‐0 rate is achieved for CEPG‐1.0 and CEPA‐0.5. The dielectric constant and loss of CEPA blends are lower than those of CEPG blend with the same phosphors content, and both of them are lower than those of neat CE. Therefore, the ternary flame‐retardant modified cyanate ester blends provide 2 ways for composites of producing printed circuit board with high flame‐retardant property and low dielectric constant and loss.     

Where the rubber meets the hand: Unlocking the sensing potential of dielectric elastomers

Practice makes perfect to some extent. Research has shown that musicians who practice the piano for long periods of time can suffer a range of hand problems from loss of control to diminished speed. Now imagine a rubber keyboard that is springy, soft, and elastic. This is the new type of input device that dielectric elastomers (DE) can create. However their usage in large sensing systems is limited by a scalability challenge. Each DE sensor is married to a pair of connection cables and electronics, adding to the complexity of the background overheads. A new efficient multi‐frequency method is presented that is capable of detecting internal pressure changes from a difference in the DE's capacitance without the need for any additional wires or connections. This effectively segments the DE into smaller sections, achieving information from a single sensor equivalent to multiple sensors. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 465–472     

Structural,optical and microwave dielectric properties of Ba1−xSrxWO4 ceramics prepared by solid state reaction route

In this paper, Barium Strontium Tungstate (Ba_1−xSr_x)WO₄ crystals with (x = 0; 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9 and 1.0) were prepared by standard wet milling ceramic preparation method. These crystals were structurally characterized by X-ray diffraction (XRD), Fourier transform Raman (FT-Raman) and Fourier transform infrared (FT-IR) spectroscopic techniques. The shape, growth and average crystal size distribution of these crystals were investigated by a scanning electron microscope (SEM). Their optical properties were investigated by ultraviolet visible (UV–vis) absorption and photoluminescence (PL) measurements. XRD patterns, Rietveld refinements data, FT-Raman and FT-IR spectroscopies indicate that all the crystals present a scheelite-type tetragonal structure without deleterious phases. FT-Raman spectra exhibited 6 Raman active modes in range from 100 to 1000 cm⁻¹, while the FT-IR spectra presented 2 infrared active modes in range from 500 to 1000 cm⁻¹. SEM micrographs showed well sintered BaWO₄ grains, while the substitution of Sr induced modifications in the shape and reduction in the grain size. UV–vis absorption measurements evidenced an increase in the values of the optical band gap (from 4.36 to 4.53 eV) with the increase of Sr into BaWO₄ lattice. Dielectric constant, temperature coefficient of resonant frequency (τ_f), quality factors were measured with Hakki–Coleman technique. The value of τ_f found −43.68 ppm/°C for BaWO₄ which increased to −21.40 ppm/°C for the SrWO₄.     

Study of Electrical Conductivity of Para-Toluene Sulfonic Acid Doped Polyaniline/Polyester-Based Polyurethane Blends in the S-Band Frequency Range

Conducting polymer blends were prepared using polyaniline doped with para- toluene sulfonic acid (PTSA-PANI) and a polyester polyol-based polyurethane (PU). The morphological, thermal and dielectric properties of the PTSA-PANI/PU blends in the frequency range of 1–5 GHz (S band) were investigated. It was found that the morphology of the samples was affected by the PTSA-PANI loading, resulting in the formation of agglomerates and pathways when above 10 wt%. The thermal stability of the composites was improved with increased PTSA-PANI loading. The electrical conductivity percolation threshold was obtained at 2.5% of PTSA-PANI loading and the electrical conductivity reached the value of 0.13 S/m at a PTSA-PANI loading of 30 wt%. The obtained results for the PTSA-PANI/PU blends prepared indicate a high potential for their successful use in electrical and electromagnetic applications.     

Thermal,Raman and dielectric study of 0.5K0.5Bi0.5TiO3–0.5PbTiO3 ceramics

The 0.5K_0.5Bi_0.5TiO₃–0.5PbTiO₃ ceramics were prepared by following a standard solid-state method. The Raman, thermal and dielectric properties of these ceramics were investigated. The X-ray measurements showed that samples have single perovskite-type structure with tetragonal symmetry. Dielectric study revealed that the dielectric behaviour of the investigated ceramics is rather of normal ferroelectrics with large thermal hysteresis. The transition temperature observed by means of differential scanning calorimetry measurements is in good agreement with that obtained from dielectric study.     

Effect of barium titanate nanoparticles of different particle sizes on electro-optic and dielectric properties of ferroelectric liquid crystal

A comparative study of two different particle sizes of ferroelectric barium titanate (BaTiO₃) nanoparticles as a dopant on the molecular structure, spontaneous polarization and dielectric behavior of a pure ferroelectric liquid crystal 6F₆T have been studied. It has been found that there is a remarkable decrease in isotropic temperature of both doped samples as compared to the pure 6F₆T sample. The spontaneous polarization also decreases for both the doped samples and the reduction is more pronounced in case of the dopant with large particle size. The dielectric spectroscopy confirms the presence of soft mode as well as Goldstone mode and also shows the decrease in the value of dielectric permittivity ?' as a function of frequency for both doped samples. The improvised properties of liquid crystal host doped with BaTiO₃ nanoparticles mainly depend upon the synthesis method of nanoparticles and also upon the particle size of dopant.     

Studies on Poly(Dialkoxyphosphazenes) for the Medical Applications

Abstract

The presence of trace of chlorine in poly(diorganophosphazenes) [-N=P(OR)2-]., where R = C₂H₅, CH₂CF₃, C₂F₅, C₄H₅, C₆H₁₃, C₈H₁₇, C₁₂H₂₅, CH₂C₆H₅ in many cases leads to the substantial changes of their physicochemical properties and limits application possibilities of this class of polymers especial for the medical materials. Despite the optimization of reaction conditions for each nucleophilic alkoxy substituent, the obtained poly(dia1koxyphosphaenes) exhibited some physicochemical anomalies.