Copolymerization of ethylene and 1-butene with highly active Ticl4/THF/Mgcl2, Ticl4/THF/Mgcl2/SiO2, and TiCl3.1/3AlCl3 catalysts

Highly active catalysts for copolymerization have been prepared by the precipitation of MgCl₂/ToCl₄ complex with or without high surface area silica. Copolymerization of ethylene and 1-butene has been tested by using the prepared catalysts at various concentrations of 1-butene. The catalytic activities are 20–80 kg/g Ti h. The rate of copolymerization is strongly affected by the addition of 1-butene. The decay rate of copolymerization is first order with respect to time. Analyses of copolymers with solvent extraction, DSC, IR, XRD, and NMR were performed. Ethylene reactivity ratio (k₁₁) for TiCl₄/MgCl₂/THF catalyst is calculated to be about 26 by NMR spectrum. © 1994 John Wiley & Sons, Inc.     

Sn0.5Ti0.5O2催化剂上SO2、NO和CO反应的机理

Sn0.5Ti0.5O2催化剂对NO＋CO反应活性不高， 350 ℃时NO的转化率只有50％,但反应气中含有SO2时， NO的转化率接近100％,说明SO2对Sn0.5Ti0.5O2催化剂上的NO＋CO反应具有促进作用. XPS表征发现,SO2＋CO、SO2＋NO＋CO反应后催化剂表面有微量硫存在，而反应前没有检测到硫的存在.结合反应性能测定、瞬变应答实验、XRD、TPD研究等，发现催化剂上的表面硫参与了NO的催化还原反应，是NO＋CO反应更重要的活性中心.据此，提出了SO2＋NO＋CO反应的氧化还原反应机理.     

The effect of titanium alkoxides in the synthesis of heterobimetallic complexes by titanocene(III) alkoxide-induced metal-metal bond cleavage of metal carbonyl dimers

A series of titanocene(III) alkoxides L₂Ti(III)OR where L = Cp, R = Et(1b), ^tBu(1a), 2,6-Me₂C₆H₃(1c), 2,6-^tBu₂-4-Me-C₆H₂(1d), or L = Cp*, R = Me(2e), ^tBu(2a), Ph(2f) was synthesized and subjected to reaction with [CpM(CO)₃]₂ [M = Mo, W], [CpRu(CO)₂]₂, and Co₂(CO)₈. The Ti(III) precursors 1a, 1c, 2a, 2e, and 2f reacted with [CpM(CO)₃]₂ [M = Mo, W] to form heterobimetallic complexes L₂Ti(OR)(μ-OC)(CO)₂MCp [M = Mo, W], of which Ti and M are linked by an isocarbonyl bridge. Reactions of these Ti(III) complexes with Co₂(CO)₈ resulted in formation of Ti-Co₁ heterobimetallic complexes, from 2a, 2e, or 2f, or Ti-Co₃ tetrametallic complexes, Cp₂Ti(O^tBu)(μ-OC)Co₃(CO)₉ from 1a, 1b, or 1c. The products were characterized by NMR, IR, and X-ray crystallography. Reaction mechanisms were proposed from these results, in particular, from steric/electronic effects of titanium alkoxides.     

New Layered Double Hydroxide, Zn–Ti LDH : Preparation and Intercalation Reactions

The layered double hydroxide (LDH) well known for its abilityto intercalate anionic compounds has been prepared conventionallyonly with bivalent and trivalent cations. In this study, Zn–Ti LDH consisting of bivalent and tetravalent cations was prepared, andreacted with organic monocarboxylic, dicarboxylic and aromatic acidsat high or room temperature. XRD patterns of the prepared LDH(Zn–Ti-CO₃) showed that interlayer spacing of the LDH was 0.67 nm. The value was small compared to the usual LDH (Zn–Al–CO₃)of 0.76 nm in the case of carbonate anion as the guest. Also, DTA,TG and DTG analysis indicated that the electrostatic force betweenthe layers and carbonate anions increased where the carbonate anionsin Zn–Ti LDH decomposed at 255 °C while those inZn–Al–CO₃ decomposed at 230–240 °C.     

Electrochemical and Structural Characterisation of Dip-Coated Fe/Ti Oxide Films Prepared by the Sol-Gel Route

Thin solid films of mixed Fe/Ti oxide composition (Fe/Ti molar ratios: 0.5∶1, 1∶1, 1.5∶1) have been made from Fe(NO₃)₃ alcoholic solution to which Ti(OiPr)₄ was added. Films have been deposited by the dip-coating technique and heat-treated at 300°C and 500°C. Powders of Fe/Ti oxide heat-treated at 300°C are amorphous, while powders annealed at 500°C for 40 hours transformed to mixed rutile, pseudobrookite and hematite phases. The structure of the XRD amorphous films was identified with the help of near-normal reflection absorption (6°) (IRRA) and near-grazing incidence angle (NGIA) spectroscopy. NGIA FT-IR spectra of films are characterised with a single phonon mode appearing in the spectral range 600–950 cm⁻¹ which shifts with increasing Ti concentration from 675 cm⁻¹ (Fe₂O₃) to 904 cm⁻¹ (TiO₂) thus exhibiting one-mode behavior. Electrochemical investigations made with the help of cyclic voltammetry (CV) and chronocoulometry (CPC) performed in 0.01M LiOH and in 1M LiClO₄/propylene carbonate electrolytes revealed that films are able to uptake reversibly Li⁺ ions with a charge capacity (Q) per film thickness (d) in the range 0.1–0.26 mC/cm²nm and 0.06 mC/cm²nm, respectively. The temperature at which the films were prepared alters the rate of Li⁺ insertion which is faster for less compact films obtained at 300°C. In situ UV-VIS spectroelectrochemical measurements revealed that Fe/Ti oxide films bleached in the UV spectral region (300 nm<λ<450 nm) and colored in the VIS spectral region (450 nm<λ<800 nm), thus exhibiting mixed anodic and cathodic electrochromism.     

Pt/K2La2Ti3O10催化剂的合成及其光催化分解甲醇水溶液制氢

用高温固相法合成了具有类钙钛矿型结构的层状化合物K₂La₂Ti₃O₁₀, 用XRD, UV-DRS对其进行表征. 利用不同还原方法制备了Pt/K₂La₂Ti₃O₁₀光催化剂, 并且用脉冲氢氧滴定法(HOT)测定了K₂La₂Ti₃O₁₀表面Pt的分散度. 考察了Pt/K₂La₂Ti₃O₁₀光催化分解甲醇水溶液制氢的活性. 比较了负载Pt与负载Ni和纯的K₂La₂Ti₃O₁₀的光催化活性. 研究了Pt负载量、不同还原方法对光催化分解水制氢反应活性的影响. 在最佳的Pt负载量2%(质量百分比)下, 产氢速率达到233.88 mmol·h^&;#8722;1. 讨论了该催化剂的能带结构及反应机理.     

累积轧制Ti／AI复合材料的微观结构演变和力学性能研究

用累积轧制法成功制备了平均晶粒尺寸为200--300nm的超细等轴晶Ti／A1多层复合材料．研究了Ti／A1多层复合材料的微结构变化和力学性能．     

Preparation of BiVO4/MIL‐125(Ti) composite with enhanced visible‐light photocatalytic activity for dye degradation

Because of their desired features, including very specific surface areas and designable framework architecture together with their possibility to be functionalized, Metal Framework (MOF) is a promising platform for supporting varied materials in respect of catalytic applications in water treatment. In this work, a novel visible‐light‐responsive photocatalyst that comprised BiVO₄ together with MIL‐125(Ti), was synthesized by a two‐step hydrothermal approach. The characterization of as‐obtained samples as performed by X‐ray diffraction, scanning electron microscopy, high resolution transmission electron microscopy, Fourier transform infrared spectroscope, X‐ray photoelectron spectroscopy and ultraviolet‐visible diffuse reflection spectra. Rhodamine B was selected being a target for the evaluation of the photocatalytic function of as‐developed photocatalyst. The photocatalytic reaction parameters, for example, the content of BiVO₄ as well as initial concentration of Rhodamine B was researched. The composite photocatalyst possessing Bi:Ti molar ratio of 3:2 brought to light the fact that the greatest photocatalytic activity had the ability to degrade 92% of Rhodamine B in 180 min. In addition to that, the BiVO₄/MIL‐125(Ti) composite could keep its photocatalytic activity during the recycling test. The phenomenon of disintegration of the photo‐generated charges in the BiVO₄/MIL‐125(Ti) composite was brought to discussion as well.     

Cooperative effect of Fe and Ti species over Fe–Ti–Ox catalysts on the catalytic hydrolysis performance of hydrogen cyanide

FeO_x, TiO₂, and Fe–Ti–O_x catalysts were synthesized and used in the catalytic hydrolysis of hydrogen cyanide (HCN). Nearly 100% HCN conversion was achieved at 250 °C over the Fe–Ti–O_x catalyst. TiO₂ rutile was detected over TiO₂, but not over Fe–Ti–O_x, which suggested that the interaction between Fe and Ti species could inhibit the TiO₂ phase transition. Furthermore, the interaction between Fe and Ti species over Fe–Ti–O_x could promote the selectivity of NH₃ and CO. The mechanism of hydrolysis of HCN over FeO_x, TiO₂, and Fe–Ti–O_x can be given as follows: HCN + H₂O → methanamide → ammonium formate → formic acid → H₂O + CO.