海藻酸-磷脂微囊复合水凝胶的制备、表征及毒理学分析

采用薄膜分散法合成磷脂微囊,根据胶粒的双电层理论,通过在微囊中加入氯化锰、氯化钙和氯化镁电解质溶液,使微囊处于相对稳定的状态.研究发现加入氯化锰和氯化钙溶液,微囊胶体的粒径没有明显的变化,但加入一定浓度氯化镁溶液,其粒径明显变大.为了进一步增加磷脂微囊稳定性,将氯化锰、氯化钙、氯化镁磷脂微囊胶体分别与海藻酸钠(SA)溶液混合.结果表明,氯化镁与SA几乎不能形成水凝胶,氯化钙与SA形成水凝胶能力强于氯化锰.微囊胶体溶液中的磷脂酰丝氨酸(PS)可以与Ca~(2+)和Mg~(2+)键合形成PS-Ca~(2+)和PS-Mg~(2+),但不能与Mn~(2+)键合形成PS-Mn~(2+).对氯化钙磷脂微囊与海藻酸钠合成的复合水凝胶的形貌、溶胀率及细胞毒性进行了表征,结果表明,氯化钙与SA形成的水凝胶可以捕获胶体中磷脂微囊,且形貌规整,结构稳定,无细胞毒性.     

Synthesis and thermodynamic studies of the dinuclear adducts between dimethyltin(IV) dichloride with SalenH2 and MII(Salen) complexes in chloroform

A UV-Vis spectrophotometric study of adduct formation of SalenH₂ (1) and M^II(Salen), where M?=?Mn (2), Fe (3), Co (4), Ni (5) and Cu (6) as donors with Me₂SnCl₂ as acceptor have been investigated in chloroform. Adducts (1a–6a) have been characterized by ¹H, ¹³C and ¹¹⁹Sn NMR, IR and electronic spectroscopy and microanalysis. Formation constants and thermodynamic parameters were measured for 1 : 1 and 2 : 1 adducts at various temperatures (T?=?278 to 308 K). The data refinement was carried out with the SQUAD 84 program. The trend of formation constants of M^II(Salen) complexes with Me₂SnCl₂ follows the order: Mn>Fe>Cu>Co>Ni. The formation constants for the free 1 and M^II(Salen) with Me₂SnCl₂ changes according to the following trend: M^II(Salen)>SalenH₂     

Extensions of algorithmic senstivity calculations nonlinear programming using barrier and penalty functions

We provide a theoretical basis for approximating the sensitivity of a perturbed solution and the local optimalvalue function, using information generated by a sequential unconstrained minimization technique in the normal course of solving a mathematical program. We show that various algorithmic sensitivity results can be obtained without other assumptions than those needed for the corresponding nonalgorithmic results. Our results extend the algorithmic calculation of sensitivity information introduced by Fiacco, utilizing the logarithmic barrier function and quadratic penalty function     

Generalizations of a Theorem of Datko and Pazy

This note gives necessary and sufficient conditions for exponential stability of semigroups of linear operators in Banach spaces. Generalizations of a well-known result due to Datko, Pazy and Neerven are obtained for the case of semigroups of operators that are not strongly continuous.     

工业催化:选择性提升策略

工业催化直接或间接贡献了世界GDP的20%-30%,推动了产业变革和社会进步.对于工业催化,开发高活性、高选择性和高稳定性的多相催化剂至关重要,而选择性是最主要的挑战.因为实现催化选择性的精确控制是绿色化学的重要概念之一,更是工业催化可持续发展的重要驱动力;而且,选择性不仅决定了催化过程的原子经济性,也影响到后续分离过程的能耗.针对多数工业催化反应存在'活性越高、选择性越低'的相互制约与矛盾问题,本文以若干能源化工催化反应为例,试图总结催化选择性提升的一般策略,以期为有关工业应用的催化新过程提供科学参考.多相催化一般经历与反应物有关的步骤(反应物的外扩散、内扩散和化学吸附)、与反应有关的步骤(活化和表面反应)、以及与产物相关的步骤(产物脱附、内扩散和外扩散).本文依此归纳并举例说明提高选择性的一般策略.在汽油催化吸附脱硫中,主要利用了催化剂中零价镍-氧化锌耦合活性中心的选择吸附策略,使零价镍优先吸附含硫化合物,从而实现选择性脱硫而不饱和烯烃.在甲苯和甲醇侧链烷基化反应中,主要利用了特定空间分布的酸碱吸附位,实现吸附甲苯和稳定甲醛中间体的协同匹配.在乙苯脱乙基型二甲苯异构化反应中,主要利用了双床层对催化剂功能的分离策略,在不同的择形催化剂床层中分别进行乙苯脱乙基反应和二甲苯异构化反应,从而提高对二甲苯的产量.在苯选择加氢制环己烯反应中,主要利用强化产品脱附的策略,促进环己烯产品从亲水改性的催化剂表面脱附,实现环己烯选择性的提升.这些炼油与化工研究案例中同时存在多个连串-平行反应,主要是利用吸附中心、反应中心在时间或空间上的耦合、解耦或限域策略,调控不同途径的扩散能垒、反应能垒,实现了催化剂选择性的提升.多相催化多是复杂过程,基于提高选择性的初步认识,还要结合具体复杂催化过程,系统研究单策略以及多策略组合作用下的选择催化过程,实现在合理时间尺度、空间尺度上设计高选择性的催化剂,而这本质上是一种介尺度催化.     

On Controllability And Maximum Principle for Discrete Inclusions ∗ ∗A part of the paper was written while the first author was visiting the laboratory of Prof.S.Suzuki,Department of Mechanical Engineering,Sophia University,Tokyo,Japan$ef:

The paper develops sufficient conditions for controllability and necessary conditions in different forms of the maximum principle for extremal solutions of discrete inclusions. The objective function is assumed to be locally lipschitzian only     

Potentiometric and Thermodynamic Studies of Some Metal–Cysteine Complexes

A new and simple potentiometric method is developed to determine the stability constants of cysteine complexes with Mn(II), Cu(II), Zn(II), Cd(II), and Ce(III) metal ions using a modified Bjerrum method. Potentiometric titrations were performed in water and water/dioxane mixtures at five different temperatures. The least and highest stable complexes were those of Cu(II) and Zn(II), respectively. Furthermore, by conducting the experiments at temperatures of 15, 20, 25, 35, and 45 °C, the thermodynamic parameters ΔH°, ΔS°, and ΔG° for the pertinent complexes were calculated. The results show that the ΔH° values of the complexes are positive except for Zn(II). Negative values of ΔG° are evidence for the spontaneity of the reactions.     

Kinetic and thermodynamic studies on the adsorption behavior of Rhodamine B dye on Duolite C-20 resin

The adsorption behavior of Rhodamine B dye from aqueous solutions was investigated onto the cation-exchange resin, Duolite C-20 (hydrogen form). The effects of various experimental factors; sorbent amount, contact time, dye concentration and temperature, were studied by using the batch technique. Lagergren pseudo-first-order equation shows good applicability with high correlation coefficients for all ranges of initial dye concentrations and at different temperatures. This equation was used to describe the kinetics of the dye adsorption process. The adsorption constants were evaluated by using both the Langmuir and Freundlich adsorption isotherm models. Thermodynamic parameters were obtained and it was found that the adsorption of Rhodamine B dye onto Duolite C-20 resin was an endothermic and spontaneous process at the temperatures under investigation.     

Dew Points of Binary Methane + Water: Measurement and Correlation

Experimental measurements of dew points for four methane + water mixtures between 2.6 2 10 5 Pa and 100.4 2 10 5 Pa and the temperature range from 225.5 K to 272.7 K were carried out. The experimental results were analysed in terms of both an equation of state model and an excess function-equation of state method, which reproduced the experimental data within AAD from 1.8 to 3.1 K and from 0.9 to 1.8 K, respectively.