A simple and high‐resolution HPLC‐PDA method for simultaneous quantification of local anesthetics in in vitro buccal permeation enhancement studies

A simple, isocratic, high‐resolution and prompt HPLC‐PDA method was developed and validated for the simultaneous quantification of prilocaine (PCL) and lidocaine (LCL) hydrochlorides in in vitro buccal iontophoresis‐driven permeation studies. A reversed‐phase C₁₈ column (250 mm x 4.6 mm, 3μm, 110Å) was used for the chromatographic separation. The mobile phase contained acetonitrile: 0.1M sodium phosphate buffer, pH 7.0 (1:1, v/v), plus 0.05% (v/v) diethylamine. The isocratic flow rate was set at 1 mL/min and the detection wavelength was 203 nm. PCL and LCL eluted in 8.9 min and 13 min, respectively, and the system suitability parameters varied within an acceptable range. The method was selective, sensitive, precise, accurate and robust, producing a linear plot at the concentration range of 0.25 to 10 µg/mL. The application of this method was demonstrated by a significant enhancement of the permeation of PCL and LCL with the application of iontophoresis (1 mA/cm² per 1 h) through isolated porcine esophageal epithelium. The amount of the drug retained in the epithelium also increased with the application of an electrical current. Copyright © 2015 John Wiley & Sons, Ltd.     

Bioactive Penta-Coordinated Diorganotin(Iv) Complexes of Pyridoxalimine Schiff Bases

Abstract

Diorganotin(IV) complexes of an extended system derived from the condensation of pyridoxal hydrochloride with 2-amino phenol (H₂L¹), 2-amino-4-methyl phenol (H₂L²), 2-amino-4-chloro phenol (H₂L³), 2-amino-4-nitro phenol (H₂L⁴), 1-amino-2-naphthol hydrochloride (H₂L⁵) have been synthesized by the reaction of dichlorodiorganotin(IV) in a 1:1 molar ratio with these ligands. Spectral studies (IR, ¹H, ¹³C, ¹¹⁹Sn NMR) along with physical data evidenced the formation of penta-coordinated species with the ligands acting as tridentate (ONO) with oxygen occupying the axial positions, and nitrogen at one of the equatorial positions. The ligands and their organotin complexes have been evaluated for antimicrobial activity against phytopathogenic fungi Candida albicans and Aspergillus niger at 25 ± 1 °C and bacteria Bacillus subtilis, Escherichia coli, and Staphylococcus aureus at 37 ± 1 °C. The activities of the ligands have been enhanced on complexation and the results indicate that they exhibit significant antimicrobial properties.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Determination of Tetracycline at a UV‐Irradiated DNA Film Modified Glassy Carbon Electrode

In this study, interaction of tetracycline (TC) and DNA in the Britton? Robinson buffer solution (BR) was studied by cyclic voltammetry. The experimental results reveal that TC can bind strongly to DNA and the association constant and binding number between TC and DNA was obtained. Then DNA was immobilized on a glassy carbon electrode by UV‐irradiation. Through this process, water‐soluble DNA was converted into insoluble materials, and a stable DNA film was formed on the electrode. The electrochemical oxidation behavior of TC was studied at UV‐irradiated DNA film modified glassy carbon electrode (UV‐DNA‐GCE). The response of modified electrode was optimized with respect to pH, accumulation time, ionic strength, drug concentration and other variables. TC at the surface of modified electrode showed a linear dynamic range of 0.30–90.00 µM and a detection limit of 0.27 µM. To demonstrate the applicability of the modified electrode, it was used for the analysis of real samples such as pharmaceutical formulations and milk.     

Poly(allylamine hydrochloride) Functionalized Multiwalled Carbon Nanotube Modified Carbon Paste Electrode as Acetylcholinesterase Biosensor Transducer

In this work, a sensitive, practical and reliable acetylthiocholine (ATCh) biosensor based on poly(allylamine hydrochloride) functionalized multiwalled carbon nanotube (PAH/MWCNT) was fabricated and used for pesticide detection. As far as we know, this is the first work that constitutes the usage of PAH and MWCNT for ATCh biosensor. The developed system was characterized by using scanning electron microscopy, electrochemical impedance spectroscopy and cyclic voltammetry. The influence of parameters such as enzyme amount and pH were examined and a linearity between 5×10^?5 M?2.0×10^?3 M for ATCh was obtained. The proposed biosensor was applied for a model pesticide, monocrotophos, detection. The analytical curve showed an excellent linearity in the monocrotophos concentration range of 1–25 pg/mL with an incubation time of 5 min. Limit of detection and limit of quantification values were calculated as 0.88 and 2.9 pg/mL, respectively. The system was also applied for detection of monocrotophos in grape, tomatoe, tap and mineralized water samples and promising recovery values were obtained.     

Simultaneous determination of chlordiazepoxide and selected antidepressants using CZE

A simple CE method was developed and validated for the simultaneous determination of chlordiazepoxide (CHL), amitriptyline, and nortriptyline (mixture I) or the determination of CHL and imipramine (mixture II) using the same BGE. Sertraline and amitriptyline were used as internal standards for the first and second mixtures, respectively. The method allows amitriptyline to be completely separated from its impurity and main metabolite nortriptyline, which can be quantified from 0.2 μg/mL. The separation was achieved using 20 mM potassium phosphate buffer pH 5 containing 12 mM β‐cyclodextrin and 1 mM carboxymethyl‐β‐cyclodextrin. UV detection was performed at 200 nm and a voltage of 15 kV was applied on an uncoated fused‐silica capillary at 25°C. These experimental conditions allowed separation of the compounds to be obtained in 7 min. Calibration graphs proved the linearity up to 40 μg/mL for CHL, up to 100 μg/mL for amitriptyline and imipramine, and up to 5 μg/mL for nortriptyline. The accuracy and precision of the method have been determined by analyzing synthetic mixtures and pharmaceutical formulations. The analytical results were quite good in all cases indicating that the method was linear, sensitive, precise, accurate, and selective for both mixtures.     

One-Pot Synthesis of 1H-Benzimidazole Derivatives Using Thiamine Hydrochloride as a Reusable Organocatalyst

A simple and efficient one-pot synthesis of 1H-benzimidazole derivatives using thiamine hydrochloride (VB₁) as the organocatalyst from o-phenylenediamine and aldehyde in dimethylformamide is described. Compared to classical reaction conditions, this new method consistently has the advantages of excellent yields, metal-ion-free procedure, and good recovery and reusablity of catalyst.     

An Efficient One-Pot Synthesis of N-Methoxy-N-methylamides from Carboxylic Acids

Abstract

Several N-methoxy-N-methylamides were prepared by the reaction of the corresponding carboxylic acids with N,O-dimethylhydroxylamine hydrochloride at room temperature using trichloromethyl chloroformate in the presence of triethylamine in excellent yields.     

Preparation of Primary Thioamides From Nitriles Using Sodium Hydrogen Sulfide and Diethylamine Hydrochloride

Primary thioamides are prepared in moderate to excellent yields by treating nitriles with sodium hydrogen sulfide and diethylamine hydrochloride in an appropriate solvent with mild heating.     

Formulation and In Vitro Evaluation of Sustained Release Microspheres of Diltiazem Hydrochloride Prepared by Emulsification-Internal Gelation Method

The present work describes the formulation of alginate microspheres containing diltiazem hydrochloride by the emulsification-internal gelation method with the use of barium carbonate as a cross-linking agent. The effect of various factors (the concentration of alginate and barium chloride) on the drug loading efficiency and in vitro release were investigated. Fourier transform infrared microscopy (FTIR) and differential scanninig calorimetry (DSC) analysis confirmed the absence of any drug polymer interaction. X-ray diffraction (XRD) pattern showed that there is a decrease crystallinity of the drug. The in vitro drug release profile could be altered significantly by changing various processing parameters to give a controlled release of drug from microcapsules. The stability studies of drug-loaded microcapsules showed that the drug was stable at different storage conditions.     

Micellization and Clouding Phenomenon of Phenothiazine Drug Promethazine Hydrochloride: Effect of NaCl and Urea Addition

Herein we report the micellization and clouding behavior of promethazine hydrochloride (PMT) in absence and presence of NaCl/ureas. The critical micelle concentration (CMC) of PMT is measured by conductivity method and the values decrease with increasing the NaCl concentration. With increasing the temperature, the CMC first increases then decreases. At 25°C, the maximum CMC values were obtained (with or without NaCl). The thermodynamic parameters are evaluated which indicate more stability of the PMT solution in presence of NaCl. PMT shows phase separation also. The cloud point (CP) of PMT decreases with increase in pH due to deprotonation of the drug molecules. Ureas decreased the CP and the behavior is explained on the basis of removal of water from the head group region.