高氯酸二水邻菲咯啉合铜配合物的合成和晶体结构

Crystal structure of the title compound， Cu(phen)(H₂O)₂·ClO₄(phen=1，10-phenanthroline)， was deter-mined by X-ray crystallography. It crystallizes in the monoclinic system， space group C2/c with lattice parameters a=1.49071(4)nm， b=1.38594(4)nm， c=0.70292(1)nm， β=108.509(1)° and Z=4; The Cu(Ⅰ) ion is chelated by a phen ligand and two aqua ligands in cis arrangement and assumes a C2 symmetric square-planar geometry with the CuN₂O₂ core. Eight Cu(phen)(H₂O)₂·ClO₄ molecules are interconnected by strong hydrogen bonds between coordinated water molecules and uncoordinated perchlorate anions to form a molecular scale cavities along c axis. The bond distances of Cu-N and Cu-O are 0.2003(4)nm and 0.1973(3)nm， respectively. CCDC： 197600.     

Isoindole Cycloadditions. Part III: The Synthesis of "Windscreen Wiper" and Other N-Bridged Cavity Systems

The thermal addition of N-carbobenzyloxyisoindole (N-Z isoindole) 11a, generated by the reaction of 3,6-di(2-pyridyl)-s-tetrazine 9 with N-Z 7-azabenzonorbornadiene 8a, onto dimethyl tricyclo[4.2.1.0^2.5]nona-3,7-diene-3,4-dicarboxylate 17 occurred site selectively at the cyclobutene -bond to form a stereoisomeric mixture of 1 : 1-adducts 18 and 19, in which the bent-frame isomer 19 was dominant (ratio 5 : 1). In contrast, N-benzyl tetrafluoroisoindole 11c reacted with 17 only under high-pressure conditions (14 kbar, RT, 4 days) to afford 1 : 1-adducts at the cyclobutene site, in which the extended-frame isomer 18c was dominant and the accompanying bent-frame product 19c reverted to starting materials soon after isolation. These same stereoselectivities were used to prepare "windscreen wiper" compound 28c having two mobile N-benzyl substituents attached to a rigid scaffold by the reaction of N-benzyl tetrafluoroisoindole 11c with tetramethyl tetracyclo[4.4.1.0.^2,5.0^7.10]undeca-3,8-diene-3,4,7,8-tetracarboxylate 23. Cavity bis-(cyclobutene-1,2-diester) 6 reacted with N-benzyl tetrafluoroisoindole 11c twice over to produce cavity structure 36 with two O- and two N-benzyl bridges on the inner face, whereas the narrower cavity bis-alkene 32 stopped at the 1 : 1-addition stage. The dynamics of the Z-group in the dual adducts 26a–28a are discussed briefly and key adducts and cavity systems have been structurally evaluated by X-ray crystallography, VT NMR, and molecular modeling.     

Emission characteristics of high-powered microwave induced plasma optical emission spectrometry by using nitrogen–oxygen mixture gas

A high-powered, microwave-induced nitrogen–oxygen plasma (N₂–O₂–MIP) generated by using an Okamoto cavity at atmospheric pressure was investigated when the observation height, the flow rate of carrier gas, and the oxygen content were varied as the experimental parameters. The emission characteristics of the plasma were evaluated with regard to the excitation temperature and the intensity ratio of atomic line to ionic line. The excitation temperature of the N₂–O₂–MIP was in the range of 5100–5700 K when the oxygen content was varied from 0 to 30% at the observation height of 7 mm and the carrier gas flow rate of 0.6 l/min. The intensity ratio of atomic line to ionic line was elevated with an increase in the oxygen content.     

On the cavitation energy of water

Free-energy-perturbation theory from molecular dynamics calculations has been used to obtain the DeltaG of adjoining cavities' formation in water. The DeltaGs for systems with three, five and seven cavities are compared with that of a single cavity of the same volume, and found to be in good agreement. The conditions under which the analytical formulation of the energy of cavity formation proposed by Pierotti holds are discussed. The data for a single cavity have been tabulated and can lend themselves to a simple numerical implementation in standard quantum chemical packages, which can be used when high accuracy for DeltaG(cav) is required.     

Validation of an empirical RNA-ligand scoring function for fast flexible docking using RiboDock®

We report the design and validation of a fast empirical function for scoring RNA-ligand interactions, and describe its implementation within RiboDock, a virtual screening system for automated flexible docking. Building on well-known protein-ligand scoring function foundations, features were added to describe the interactions of common RNA-binding functional groups that were not handled adequately by conventional terms, to disfavour non-complementary polar contacts, and to control non-specific charged interactions. The results of validation experiments against known structures of RNA-ligand complexes compare favourably with previously reported methods. Binding modes were well predicted in most cases and good discrimination was achieved between native and non-native ligands for each binding site, and between native and non-native binding sites for each ligand. Further evidence of the ability of the method to identify true RNA binders is provided by compound selection ('enrichment factor') experiments based around a series of HIV-1 TAR RNA-binding ligands. Significant enrichment in true binders was achieved amongst high scoring docking hits, even when selection was from a library of structurally related, positively charged molecules. Coupled with a semi-automated cavity detection algorithm for identification of putative ligand binding sites, also described here, the method is suitable for the screening of very large databases of molecules against RNA and RNA-protein interfaces, such as those presented by the bacterial ribosome.     

Study on δ‐form complex in syndiotactic polystyrene–organic molecules systems. IV. Formation of complexes with a mixture of solvents and structural changes during the sorption of solvents by syndiotactic polystyrene mesophase membranes

The syndiotactic polystyrene (sPS) δ form was crystallized from mixtures with different compositions of p‐chlorotoluene–chlorobenzene (p‐CT–CB) and p‐chlorotoluene–1,1,2‐trichloroethane (p‐CT–TCE). The presence of the δ form and TTGG helical conformation was confirmed by Fourier transform infrared and wide‐angle X‐ray diffraction (WAXD) analyses. In sPS/p‐CT–CB and sPS/p‐CT–TCE δ‐form membranes, the relative absorbance (RA) of the p‐chlorotoluene (p‐CT) solvent peak was very high even at very low concentrations of p‐CT in comparison with the RA of higher concentrations of chlorobenzene (CB) or 1,1,2‐trichloroethane (TCE) in the mixtures. However, the RAs of both CB and TCE solvent peaks decreased with decreasing concentrations of CB and TCE in the mixtures. A negligible decrease in the RA of the TTGG helical content was observed with a decreasing concentration of CB or TCE. The WAXD results showed that the 2θ peak positions of the [010] and [ 10] planes of the sPS/p‐CT–CB and sPS/p‐CT–TCE δ‐form membranes appeared in the same position and were almost equal to those of the sPS–p‐CT δ‐form membrane. The mesophases of the sPS–p‐CT [p‐CT (A‐M)] and sPS–TCE [TCE (A‐M)] membranes were used for the sorption studies with different concentrations of various solvents. The sorption amount of aromatic solvents by both p‐CT (A‐M) and TCE (A‐M) mesophase membranes was higher than that of aliphatic solvents, regardless of the size, shape, and nature of the molecular cavity. The 2θ peak of the [010] plane of the sPS membranes slowly approached the original δ‐form value when the sPS mesophase membranes were immersed in various solvents of different concentrations for 48 h. The shifting of the 2θ peak of the [010] plane to the original δ form depended on the nature and concentration of the immersion solvents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2380–2387, 2005     

Influence of the variable wall thickness of the sample tubes and a quartz Dewar on the EPR signal intensity in a single TE102 and double TE104 rectangular cavity

The response of a single TE₁₀₂ and double TE₁₀₄ rectangular cavity to the insertion of samples contained in tubes with variable wall thickness and a quartz Dewar into the cavity has been analyzed. A direct, indirect, and concurrent (positive or negative) “lens effect” inside the double TE₁₀₄ rectangular cavity is discussed. The experimental dependence of the EPR signal intensity on the wall thickness of the sample tube, δ, for the line-like samples with identical length of the sample material column, L=30 mm, recorded in the microwave cavity showed a directly proportional increase of the relative “lens effect” with the increase of the wall thickness of the tube in the interval, δ∈<0.1 mm, >0.5 mm. The insertion of the variable-temperature double-wall quartz Dewar (home-built, resonant frequency shift, ca. −300 MHz) into the single TE₁₀₂ rectangular cavity showed the same relative “lens effect”, with ca. 1.5-time increase of the EPR signal intensity, for a point-like sample and the line-like samples with material columns of diameter of 1 and 1.3 mm, and wall thickness of the sample tubes, δ∈<0.1 mm, >0.5 mm. The increased effect of the Dewar arises because the active volume of the quartz Dewar tube walls is always much more larger than the active volume of the sample tube wall. In the case of the double TE₁₀₄ rectangular cavity, the insertion of the quartz Dewar: (i) into the same cavity, in which the sample is present, caused a direct “lens effect”, with ca. 1.8-fold increase of the EPR signal intensity; however, (ii) into the complementary cavity, in which the sample is absent, caused an indirect “lens effect”, with ca. 0.6-fold decrease of the EPR signal intensity. With the Dewar and sample in one cavity and a large empty sample tube in the complementary cavity, a concurrent (positive or negative) “lens effect” can be observed. Thus, the possible increase/decrease of the EPR signal intensity depends on the volume ratio of the quartz Dewar tube walls and large sample tube wall inserted into the double TE₁₀₄ rectangular cavity. Each of the above phenomena may be a significant source error in quantitative EPR spectrometry unless the samples to be compared in the quantitative EPR analysis are contained in sample tubes having the same wall thickness and each EPR spectra should be recorded inside an identical quartz Dewar.     

腔长失调对光腔衰荡法测量精度的影响

 只考虑腔长失调因素下建立了反射率模拟测量的理论模型。根据高斯光束传输规律分析了腔长失调对衰荡腔模式耦合的影响，推导了腔长失调与谐振腔输出脉冲信号、衰荡信号与反射率之间的关系，模拟了腔长失调在±10mm范围内的光脉冲衰荡现象。结果表明：对于光敏面直径为0.2mm的高速探测器，为了保证10^-6的测量精度，腔长的失调量应控制在±1mm之间。在光路调节中采用具有对数变换功能的示波器和动态范围较大的探测器，可以提高测量精度。     

回旋速调管放大器输出腔的特性研究

 利用变截面波导的耦合模理论，根据输出腔中电场幅值分布函数所满足的微分方程组，编写了具有自动优化功能的计算程序，分析研究了不同渐变角度、考虑腔体损耗前后和输出腔与外电路失配时，谐振频率、腔体品质因数和高频场幅值沿轴分布的变化情况，为进一步研究高频场与电子注的互作用和输出腔奠定了基础。     

Lattice Boltzmann simulation of two-sided lid-driven flow in a staggered cavity

In this article, the lattice Boltzmann method is employed in order to explore incompressible fluid flow inside a two-sided lid-driven staggered cavity. Results of the lattice Boltzmann simulation for antiparallel motion of lids are compared with the data from existing literature. For parallel motion of lids, the characteristics of flow pattern for a variety of Re numbers (50–3200) are presented. An asymmetric steady-state flow pattern for parallel motion of lids is obtained.