Effect of sunset yellow dye on morphological,optical, dielectric,thermal and mechanical properties of KDP crystal

Herein, we describe the growth and morphology of well-defined dyed crystals of KH₂PO₄ (potassium dihydrogen orthophosphate; KDP) containing organic azo (sunset yellow; SSY) dye in the {1 0 1} & {0 0 1} pyramidal growth sectors. An understanding on selective dye inclusion in various growth sector of host crystal is proposed, which will help in designing novel tailor-made dyed photonic crystals. The structural analysis and the identification of various functional groups present in as grown KDP crystals were carried out using powder XRD, FTIR and Raman studies. Solid state transmittance spectra for dyed KDP crystals displayed three absorption peaks at 230 nm, 311 nm and 477 nm, which were blue shifted for SSY dye in KDP crystal relative to neutral aqueous solution of SSY dye. These blue shifts in the absorption maxima confirm the successful incorporation of sunset yellow dye into the pyramidal growth sectors of dyed KDP crystals. The band around 409 nm in the photoluminescence emission spectrum indicates a violet emission. SSY dye doped KDP crystals showed enhanced dielectric properties and thermal stability as compared to pure KDP crystal. The mechanical strength of the KDP crystals estimated using Vickers microhardness test was found to decrease with the increase in SSY dye doping.     

Combinatıon of a Box-Behnken design technique with response surface methodology for optimization of the photocatalytic mineralization of C.I. Basic Red 46 dye from aqueous solution

The photodegradation of an industrial azo dye C.I Basic Red 46 was examined in a fixed-bed photoreactor using UV-lamps simulated to the solar irradiation. In our photodecolorization study, the UV/TiO₂ process was optimized using the Box-Behnken approach to evaluate the synergistic effects of three independent parameters (initial concentration of the dye, flow rate, and UV intensity) on mineralization effectiveness. The response surface methodology was in good promise with the prediction model (coefficients of determination of decolorization and mineralization were R²_Dec = 0.997 and R²_TOC = 0.994, respectively). The effects of the factors could be estimated from a second–order polynomial equation and student’s t-test. The optimal parameters of decolorization and mineralization were as follows: initial concentration of colorant 25 mg L⁻¹, rate of fluid flow 0.3 L min⁻¹, and ultraviolet light intensity 38.1 W m⁻². The decolorization and mineralization removal efficiency under these optimal conditions were 100% and 57.63% respectively. These results indicate that optimization using response surface methodology, based on the Box-Behnken approach, is an excellent tool for determining the optimal conditions, and the process can be easily extrapolated for a specific treatment of real waste water containing the azo dye C.I Basic Red 46. Also, the intermediates that were produced during photodegradation process of Basic Red 46 were determined by GC/MS.     

Determination of direct orange 8 in effluent using a polypyrrole modified electrode

Electrochemical studies of direct orange 8 were carried out with a bare glassy carbon electrode (GCE) and a polypyrrole-coated GCE in aqueous acetonitrile medium using voltammetric techniques. One reversible couple around 0.3?V due to the redox reaction of the phenol group, one reduction peak around ?0.4?V due to reduction of the azo group and one oxidation peak around 1.0?V due to oxidation of the amino group were observed. Chronocoulometric studies revealed dye adsorption on the GCE. A square-wave stripping method was developed for the determination of the dye at pH 13.0, and a linear calibration equation obtained. The reproducibility in the measurement of peak currents was confirmed from the RSD value 2.8% at 0.001?mg?mL^?1 concentration. A comparison of the stripping voltammetric method with the UV-Vis spectrophotometric method was made. The determination limits are wider and the RSD value is lower in the stripping voltammetric method. The concentration of the dye present in dye effluent was determined using this method.     

Fluorescence properties of novel 6-butyl-2,3-dicyano-7-methyl-6H-1,4-diazepine styryl dyes containing ethyleneglycol units

The fluorescence properties of novel 6-butyl-2,3-dicyano-7-methyl-6H-1,4-diazepine styryl dyes having mono-, di-, tri-, and tetra(ethyleneglycol) units were examined. The mono(ethylenglycol) derivative was solid at room temperature, whereas the di-, tri-, and tetra(ethylenglycol) derivatives were oily. The monoethyleneglycol derivative showed weak aggregation-induced emission enhancement with fluorescence maximum at 649 nm, which comes from J-aggregates. The fluorescence of oily di-, tri-, and tetra(ethyleneglycol) derivatives in neat form was very weak. No aggregation-induced emission enhancement was observed for the oily derivatives.     

Photoluminescence-Based Techniques for the Detection of Micro- and Nanoplastics

The growing numbers related to plastic pollution are impressive, with ca. 70 % of produced plastic (>350 tonnes/year) being indiscriminately wasted in the environment. The most dangerous forms of plastic pollution for biota and human health are micro- and nano-plastics (MNPs), which are ubiquitous and more bioavailable. Their elimination is extremely difficult, but the first challenge is their detection since existing protocols are unsatisfactory for microplastics and mostly absent for nanoplastics. After a discussion of the state of the art for MNPs detection, we specifically revise the techniques based on photoluminescence that represent very promising solutions for this problem. In this context, Nile Red staining is the most used strategy and we show here its pros and limitations, but we also discuss other more recent approaches, such as the use of fluorogenic probes based on perylene-bisimide and on fluorogenic hyaluronan nanogels, with the added values of biocompatibility and water solubility.     

Solid‐State Active Elements Based on Dyes and Prepared by a Sol‐Gel Method

A new method is suggested for producing the solgel matrices with the molecules of laser dyes introduced into them. The curves of tuning lasing in Rhodamine 6G, Rhodamine 4S, Rhodamine 101, and phenylamine 430 in these matrices are obtained. The total range of tuning is 550–650 nm at a pumping energy of 4 mJ. The halfwidth of the generation spectrum is independent of the pumping energy to 4 mJ and comprises 0.3 ± 0.1 nm. The main factors forming the generation spectrum are noted.     

Design, synthesis, and characterization of a calcium-sensitive near infrared dye

Intracellular calcium concentration in biological cells varies from 0.1 to 10 μM depending upon cell signaling and disease states. A direct estimate of calcium concentration in cell tissues within this range is possible with a novel calcium-selective reagent 15C5-774. The molecule of 15C5-774 consists of a near-infrared (NIR) chromophore (λ_max=774 nm) and a metal complexing moiety of benzo-15-crown-5. The reagent shows a strong calcium binding affinity in a 1:1 ratio and metal selectivity in the order Ca²⁺>Mg²⁺>Sr²⁺≈K⁺≈Na⁺>Zn²⁺>Li⁺. The high sensitivity is achieved by conducting absorption measurements in the NIR region where background interference from the biological matrix is low.     

Solvent Relaxation in Phospholipid Bilayers: Principles and Recent Applications

Although there exist a number of methods, such as NMR, X-ray, e.g., which explore the hydration of phospholipid bilayers, the solvent relaxation (SR) method has the advantage of simple instrumentation, easy data treatment and possibility of measuring fully hydrated samples. The main information gained from SR by the analysis of recorded “time-resolved emission spectra” (TRES) is micro-viscosity and micro-polarity of the dye microenvironment. Based on these parameters, one can draw conclusions about water structure in the bilayer. In this review, we focus on physical background of this method, on all the procedures that are needed in order to obtain relevant parameters, and on the requirements on the fluorescence dyes. Furthermore, a few recent applications (the effect of curvature, binding of antibacterial peptides and phase transition) illustrating the versatility of this method are mentioned. Moreover, limitations and potential problems are discussed.     

Polystyrene Microspheres in Tissue-Simulating Phantoms Can Collisionally Quench Fluorescence

Tissue-simulating phantoms that replicate intrinsic optical properties in a controlled manner are useful for quantitative studies of photon transport in turbid biological media. In such phantoms, polystyrene microspheres are often used to simulate tissue optical scattering. Here, we report that using polystyrene microspheres in fluorescent tissue-simulating phantoms can reduce fluorophore quantum yield via collisional quenching. Fluorescence lifetime spectroscopy was employed to characterize quenching in phantoms consisting of a fluorescein dye and polystyrene microspheres (scattering coefficients _s 100-600cm^–1). For this range of tissue-simulating phantoms, analysis using the Stern-Volmer equation revealed that collisional quenching by polystyrene microspheres accounted for a decrease in fluorescence intensity of 6-17% relative to the intrinsic intensity value when no microspheres (quenchers) were present. The intensity decrease from quenching is independent of additional, anticipated losses arising from optical scattering associated with the microspheres. These results suggest that quantitative fluorescence measurements in studies employing such phantoms may be influenced by collisional quenching.     

Spectral‐Luminescence and Generation Properties of 1‐Aza‐2‐Methyl‐6‐Aminopyrene and of Its Protolytic Forms

Spectral manifestations of protolytic forms of 1aza2methyl6aminopyrene in ethanol and aqueous solutions are investigated. The ionization constants of the protolytic forms are determined. The generation properties and photostability of a neutral molecule and a cation in excitation by an excimer XeCl laser are studied.