氢同位素球形靶丸在其相应高能离子轰击下的消融

本文采用跨音速中性气体屏蔽模型,得到了氢同位素球形靶丸在其相应高能离子轰击下的消融率G_(is)及其定标律,s可为氢或氘。计算表明,当离子与电子的未扰态能量E_(0s)/E_(0e)~2≥1.5时,G_(is)/G_(es)≥20％,G_(es)为靶丸在等离子体电子轰击下的消融率。因此,当聚变实验有中性粒子束注入加热时,需考虑高能离子轰击对靶丸消融的影响。这也为此情况下靶丸消融强化提供了一种解释。     

Spherical aberration and its correction using Lie algebraic methods

We discuss three methods to correct spherical aberration for a point to point imaging system. First, results obtained using Fermat’s principle and the ray tracing method are described briefly. Next, we obtain solutions using Lie algebraic techniques. Even though one cannot always obtain analytical results using this method, it is often more powerful than the first method. The result obtained with this approach is compared and found to agree with the exact result of the first method.     

An upper bound for the first eigenvalue of a spherical cap

By working with suitable test functions, we obtain an upper bound for the principal eigenvalue of a geodesic ball on a sphere of arbitrary dimension. This bound is sharp in the limiting case when the radius of the ball approaches the diameter of the sphere.This research was supported by ARO Grant 28905-MA.     

简易超声波换能器频率测试仪的研究

对超声波换能器频率测试系统进行了探讨，并在此基础上提出了改装设想，分析了所研究的简易超声波换能器频率测试仪的电路原理及实验结果。     

The center conjecture for non-exceptional buildings

We prove the center conjecture for spherical buildings of non-exceptional type. Our proof uses the point-line spaces associated with these buildings.     

A theoretical analysis of a piezoelectric ultrasound device with an active matching layer

This paper investigates the use of magnetically active materials in the matching layer of a piezoelectric transducer. This then allows the performance of the device to be dynamically altered by applying an external field. The effect that this new matching layer has on the performance of a typical device is theoretically investigated here. It transpires that the additional flexibility of an active matching layer can be used to maintain the efficiency of the device as the external load is varied.     

Study on the radial composite piezoelectric ceramic transducer in radial vibration

A new type of radial composite piezoelectric transducer in radial vibration is developed and analyzed. The radial composite transducer consists of a piezoelectric ceramic thin ring polarized in the thickness direction and a metal thin circular ring. They are connected together and excited to vibrate in the radial direction. The radial vibrations of a piezoelectric ceramic thin ring and a metal thin circular ring are analyzed, respectively. Their radial electro-mechanical equivalent circuits are obtained. Based on the electro-mechanical equivalent circuits and using the boundary conditions between the piezoelectric ceramic thin ring and the metal thin circular ring in the radial direction, the electro-mechanical equivalent circuit of the radial composite piezoelectric transducer is derived out and the resonance frequency equation is obtained. The relationship between the resonance frequency and the geometrical dimensions of the transducer is analyzed. Some radial composite piezoelectric transducers are designed and manufactured. The resonance frequencies and the anti-resonance frequencies, the electro-mechanical equivalent circuit parameters are measured. The effective electro-mechanical coupling coefficient and the mechanical quality factor are calculated. It is illustrated that the measured radial resonance frequencies are in good agreement with the theoretical results from the resonance frequency equation.     

非线性工作状态压电换能器匹配技术

针对压电换能器在大功率下存在复杂非线性而导致匹配参数难以优化的问题,以大功率超声金属焊接为例,通过采集测试焊接过程换能器两端电压的幅值与频率,建立换能器反谐振电阻与驱动电压有效值、频率之间的数学模型;提出基于反谐振电阻模型的最优功率匹配方法,推导了匹配电感电容的计算公式。最后实验验证了数学模型的准确性,且当换能器输入功率在最优功率附近时,匹配网络电能传输效率最高。     

Einsatz von DMS- und Piezomeßtechnik zur direkten Schubspannungsermittlung in der Kapillarrheometrie

Zusammenfassung Der Stand der Kapillarheometrie mit den Vor- und Nachteilen der einzelnen Systeme und Meßverfahren wird dargestellt. Ausgehend von diesem Stand werden zwei alternative Meßverfahren, nämlich Piezo-Einzelkraftund DMS-Meßverfahren, zur direkten Schubspannungsermittlung besprochen und eine nach diesem Prinzip konzipierte Versuchsdüse vorgestellt. Die mit dieser Düse erhaltenen Meßergebnisse zeigen im Vergleich zu konventionell, d. h. unter Anwendung des Bagley-Verfahrens, ermittelten Fließkurven im Falle der Einzelkraftmessung gute Übereinstimmung. Das Problem der Einlaufdruckkorrektur ist bei diesem Konzept von vornherein nicht vorhanden, und der ununterbrochene Fließkanal erlaubt, bei entsprechender Erweiterung auf zwei Kraftaufnehmer, einen unproblematischen Einsatz im On-line- oder sogar im In-line-Betrieb in der Polymerverarbeitung.Schlüsselwörter Rheometrie; Kapillarrheometrie; Schubspannungsermittlung; Piezokraftmessung; DMS-Anwendung; Kunststoffschmelzen; On-line-Rheometrie

---

The state-of-the-art of capillary rheometry, especially the advantages and disadvantages of different systems, is presented. Two measuring methods, a piezo single-force transducer, and a strain-gauge device combined in a testing die are compared. The strain gauges are fixed at the outside of a small capillary to detect the resulting wall shear stress between inner surface of the die and polymer flow by measuring the axial strain in the wall of the die. The single force method uses an elastic section of the die which uncouples the die from the supporting structure without changing the cross-section of the flow. The uncoupled part of the die is supported by a stiff, piezo-force transducer that detects the integral effect of wall shear stress. The resulting flow curves compare well with those using the Bagley method. With the novel die no entrance pressure-loss correction is needed. In principle, it also could be used as an on-line device for polymer processing.

Vortrag, gehalten auf der Jahrestagung der Deutschen Rheologischen Gesellschaft, TH Darmstadt, 19.–21. April 1989.     

Direct initiation of detonation in cryogenic gaseous H2-O2 mixtures

Critical conditions for the direct initiation of self-sustained detonation in cryogenic hydrogen-oxygen mixtures are examined experimentally. These initial conditions are expected to depend mainly on four parameters: the equivalence ratio of the mixture, the amount of the initial energy deposition, the initial temperature and pressure of the mixture. These critical conditions are determined by fixing alternatively three of these parameters and varying the fourth one from subcritical to supercritical detonation conditions. Results are presented for initial pressuresP _o and equivalence ratios ranging from 0.3 to 1 bar and from 1 to 2 respectively, for the two initial temperaturesT _o, 123 K and 293 K. These results indicate that for the lowest values of the initial pressure, a decrease of initial temperature may favour the onset of detonation. Whatever the initial conditions, the measured detonation pressures and velocities are in reasonably good agreement with the corresponding Chapman-Jouguet values computed using the ideal-gas equation of state.