Non-destructive and clean prediction of aviation fuel characteristics through Fourier transform-Raman spectroscopy and multivariate calibration

The combination of Fourier transform (FT)-Raman spectroscopy and partial least squares (PLS) regression is proposed to be used in off-line kerosene quality control. Here, six important physico-chemical properties have been studied: Abel flash point, initial boiling point (IBP), 10% of distilled sample, final boiling point (FBP), total percentage of aromatic compounds (% aromatics) and viscosity. The Raman spectra were obtained directly from standard 2 ml glass vials ( mm), using a Bruker RFS 100 FT-Raman spectrometer, equipped with a 1064 nm Nd:YAG laser and a Ge detector, in back-scattering mode and accumulating 25 scans (150 s acquisition time) with a laser power of 300 mW. All Raman spectra were unit normalized in order to avoid the influence of the laser power into the regression models. Different Raman shift spectral ranges have been evaluated, the 193.5-1688.1 cm⁻¹ region being the most satisfactory one. Corrected standard errors of prediction of 1.9, 2.3, 2.8 °C, 0.19 cSt and 0.7% were obtained for flash point, IBP, FBP, viscosity and % aromatics, respectively. The influences of the glass vials, sample positioning and laser power have been studied, as well.     

Preparation of polyaniline‐sulfate salt ­by emulsion and aqueous ­polymerization pathway without using ­protonic acid

Aniline was polymerized directly into polyaniline‐sulfate salt without using protonic acid in this work. Polyaniline‐sulfate salt was prepared by emulsion and aqueous polymerization pathways. The dopant i.e. sulfate ion in polyaniline‐sulfate salt was generated from ammonium persulfate which was used for oxidizing aniline. Ammonium persulfate acts both as oxidizing agent as well as protonating agent in the polymerization process of aniline to polyaniline salt. The efficiency of oxidizing and protonating power of ammonium persulfate is increased by the use of surfactant. The activity of ammonium persulfate is further increased by the use of sulfuric acid as protonic acid. It may be necessary to consider the effect of sulfate ion which is generated during the oxidation process of aniline in the chemical polymerization of aniline to polyaniline salt by ammonium persulfate either aqueous or emulsion polymerization pathway in the presence of protonic acid/functionalized protonic acid. Copyright © 2001 John Wiley & Sons, Ltd.     

Hyphenation of column liquid chromatography and Raman spectroscopy via a liquid-core waveguide: chemometrical elimination of spectral eluent background

In column liquid chromatography (LC) coupled to conventional Raman spectroscopy (RS) removal of the spectral background of the eluent is often demanding, because of the strong signals of the organic modifier. A new chemometrical method is proposed, called the eluent background subtraction (EBS) method, which can correct for small shape and intensity differences of the eluent spectra. The variations in the eluent spectra are modelled using principal component analysis (PCA). The PCA loading vectors are subsequently used for eluent background correction of the elution spectra of the analyte. The loading vectors are fitted under these spectra by an asymmetric least-squares method. This method was successfully applied under various experimental conditions and performed much better than conventional background correction methods. Analyte detectability was improved by (weighted) averaging of all elution spectra and smoothing via a p-spline function.     

高空核电磁脉冲模拟波形的双指数函数拟合法

 许多标准和公开出版物中都用双指数函数描述高空核电磁脉冲典型波形。通过数值方法，研究了双指数函数一项重要的性质。根据该性质，详细讨论了高空核电磁脉冲模拟波形数值拟合中，双指数函数特征参数与脉冲峰值、前沿、后沿以及半宽等物理参数的关系，从而提出一种简单有效的脉冲参数计算方法。通过IEC标准中规定的高空核电磁脉冲参数的估计与一个实测高空核电磁脉冲模拟波形的数值拟合，验证了该方法的有效性和可靠性。该方法能够适应多种峰值、前沿和半宽的高宽核电磁脉冲模拟波形的数值拟合。     

测量圆盘转动惯量产生误差的曲线研究

结合三线摆实验的基本过程,进行实验数据的采集。利用投影法来测量圆盘的转角大小,借助于matlab的cftool工具箱,对数据进行曲线拟合,对测出来的二组数据拟合,得到转角与百分差曲线图。通过误差的大小比较,得出圆盘转动惯量测量值与理论值的百分差随转角变化最接近于三次曲线。     

The a posteriori error estimates of Chebyshev–Petrov–Galerkin methods for second-order equations

In this paper, the a posteriori error estimates of Chebyshev–Petrov–Galerkin approximations are investigated. For simplicity, we choose the Poisson equation with Dirichlet boundary conditions to discuss the a posteriori error estimators, and deduce their efficient and reliable properties. Some numerical experiments are performed to verify the theoretical analysis for the a posteriori error estimators.     

一种不同地面分辨率图像的拼接算法

航空遥感监测中变焦镜头的广泛应用以及飞行高度的变化会获得不同地面分辨率的航空影像,因此为了实时监控到飞行区域的整体情况,需要对不同地面分辨率的图像进行拼接。提出了针对不同地面分辨率图像进行拼接的方法。首先用四分法对图像进行分割,检测变化倍率,选择配准策略;然后用基于加速鲁棒性特征(Speeded-Up Robust Features,SURF)的算法对相邻图像进行拼接。获得了焦距变化从高倍过渡到低倍,或从低倍过渡到高倍的拼接图像。通过航空变焦模拟影像的拼接实验和地面变焦影像的拼接实验表明,该方法能够对不同地面分辨率的图像进行拼接,且拼接结果均以高分辨率为基准。     

KClO_4/Zr在石英管内的燃烧发射光谱与燃烧产物分析

为了研究燃烧条件对KClO_4/Zr烟火剂燃烧过程中光辐射性能的影响,考察了KClO_4/Zr在开放环境和不同规格封闭石英管内的燃烧发射光谱和燃烧产物。借助光纤光谱仪、光电二极管和示波器测试了烟火剂燃烧过程中的光辐射能量分布和闪光时间-强度曲线,分析了所得发射光谱在(590±10),(750±10)和(808±10)nm三个主吸收波段内的光谱效率,借助SEM表征了不同燃烧条件下KClO_4/Zr燃烧产物的形貌。结果表明:在开放条件下燃烧时,KClO_4/Zr的燃烧发射光谱在可见光到近红外的宽波段内,最强辐射出现在730~820nm波段。在石英管内封闭燃烧时,随着石英管体积的减少,在石英管外检测到的燃烧发射光谱强度逐渐减弱,光谱能量分布也呈现不同的变化规律,而且对火焰发射光谱分布进行处理后,随着石英管体积的变化,得到(590±10),(750±10)和(808±10)nm波段的光谱效率也呈现不同的变化规律。但是,随着石英管体积的减少,KClO_4/Zr烟火剂的爆燃闪光辐射时间逐渐缩短,峰值辐射强度逐渐提高。增加石英管的直径,有利于在管外获得更高的有效光辐射能量,减少石英管的直径,则有利于提高烟火剂的峰值辐射强度。随着管直径的增大,KClO_4燃烧更加充分,产物粒径较小,呈规则的球状。而管长度的改变对反应并无太大影响。     

A fitting algorithm for real coefficient polynomial rooting

A new algorithm for computing all roots of polynomials with real coefficients is introduced. The principle behind the new algorithm is a fitting of the convolution of two subsequences onto a given polynomial coefficient sequence. This concept is used in the initial stage of the algorithm for a recursive slicing of a given polynomial into degree-2 subpolynomials from which initial root estimates are computed in closed form. This concept is further used in a post-fitting stage where the initial root estimates are refined to high numerical accuracy. A reduction of absolute root errors by a factor of 100 compared to the famous Companion matrix eigenvalue method based on the unsymmetric QR algorithm is not uncommon. Detailed computer experiments validate our claims.