Radiation effects in the transient hot-wire technique

The transient hot-wire technique is widely used for absolute measurements of the thermal conductivity and thermal diffusivity of fluids. It is well established that fluid radiation effects significantly influence these measurements, especially those for the thermal diffusivity. Corrections for radiation effects are based on the models developed and deviations of the measured data from the ideal line source model. In this paper, the effect of fluid radiation on the measurements of the thermal conductivity of n-pentane is presented. For comparison, the influence of thermal radiation effect on measurement of transparent fluids, such as argon is also shown. The difference between the influence of natural convection and thermal radiation is also demonstrated.     

A photometric detector driven by beta radiation

It was recently found that typical Chromatographic carrier gases such as argon or nitrogen could be used in a modified flame photometric detector for general or selective determination of eluted molecules. The detector was powered not by a flame but by a radioactively stimulated, mild discharge. The luminescence arose from the second positive system of nitrogen (in argon), and various emissions from aroyl-containing molecules (in nitrogen).This study describes experiments that take away not only the flame but also the discharge: The energy that produces the luminescence is derived solely from the beta decay of⁶³Ni. Because of this low power input, the sensitivity of the present beta-driven photometric detector (-PD) is limited to about 25 ppm of nitrogen (in argon), and to about 5 pg/s for benzaldehyde and other well-responding aroyl compounds (in nitrogen). In accordance with mechanisms postulated earlier, other types of molecules do not produce significant responses in the absence of an electrical field.Material taken from doctoral thesis     

Laser field induced charge transfer: Para-nitroaniline coupled to a quantum mechanical radiation field

Summary We present a preliminary model for describing a solvated intramolecular charge transfer reaction coupled to a quantum mechanical radiation field. Actual calculations of energies and couplings were performed with a recently developed self-consistent reaction field response method. The representation of dressed molecular states is used for calculating state populations for various laser fields. The state populations are sensitive to the properties of the laser field.     

Study on oxidation of polymers treated by high LET radiation

The oxidation of medical silicone rubber and segmented polyether urethane which were bombarded with 11.2 MeV Si⁺ or F⁺ at the dose of 5 × 10¹⁴ ions/cm² was studied. In XPS measurements, it was found that the oxygen concentration on the surface of the implanted polymeric membranes had been increasing in three months at least. ESR measurement showed that some free radicals existed in these membranes and their quantities decreased with time. Chemical analysis proved that peroxides were generated in the γ irradiated membranes. The reason for the increasing of oxygen concentration was that free radicals combined with oxygen in the air and produced peroxides on the membrane surface. Moreover, in order to demonstrate the radiation mechanism, low LET (γ rays) radiation of such polymeric membranes was carried out for comparison     

γ-射线辐照对尼龙6纤维结构的影响

<正> 过去的大多数研究表明,高能射线辐照会引起聚乙烯及聚丙烯等稀烃类聚合物分子链交联及降解,而且会导致结晶度下降。张利华等人最近的研究表明,对于尼龙1010塑料,仅当辐照剂量高到一定程度后,辐照才会破坏结晶。此外,Stowe等人曾经研究过近紫外线对尼龙66纤维结构的影响,结果表明,在空气气氛中的近紫外辐照主要导致尼龙66纤维降解,并使纤维结晶度提高。有关高能射线辐照对高度取向的合成纤维结构及性能的影响的研究尚不多见。本工作将讨论γ-射线对于尼龙6纤维结构的影响。     

Biotechnological storage and utilization of entrapped solar energy

Our laboratory has recently developed a device employing immobilized F₀F₁ adenosine triphosphatase (ATPase) that allows synthesis of adenosine triphosphate (ATP) from adenosine 5′-diphosphate and inorganic phosphate using solar energy. We present estimates of total solar energy received by Earth’s land area and demonstrate that its efficient capture may allow conversion of solar energy and storage into bonds of biochemicals using devices harboring either immobilized ATPase or NADH dehydrogenase. Capture and storage of solar energy into biochemicals may also enable fixation of CO₂ emanating from polluting units. The cofactors ATP and NADH synthesized using solar energy could be used for regeneration of acceptor d-ribulose-1,5-bisphosphate from 3-phosphoglycerate formed during CO₂ fixation.     

同步辐射白光全反射XRF在痕量元素检测的初步应用研究

叙述了同步辐射白光全反射Ｘ射线荧光分析的实验装置，给出了几种标准物质ＴＸＲＦ实验的检出限，并对实验结果进行了讨论。     

Carboxylic acid functionalization of nylon 6 by radiation grafting and conversion to zinc salts: Effects on physical properties

 Functionalization of polymers by grafting monomeric species on to the backbone of molecular chains with the use of γ-radiation has been used extensively. In this work methacrylic acid was grafted onto a commercial grade of polycaproamide (Nylon 6) by preirradiating the polymer granules to 15 kGy at a rate of 1.0 kGy per hour and subsequently immersing these in a 10% aqueous solution of methacrylic acid in the presence of small quantities of FeSO₄ as homopolymerization inhibitor. The polymer was subsequently neutralized by mixing it with zinc acetylacetonate in a laboratory scale melt mixing device. The acid-grafting polymer modification resulted in an increase in glass transition temperature, while the addition of zinc acetylacetonate gave rise to two transitions: The lower transition corresponds to a miscible mixture of free polyamide and acid-grafted polymer, both plasticized with undecomposed zinc compound, while the upper transition corresponds to the zinc salt of the acid grafted polyamide. Through rheological measurements it was shown that both the acid-grafted polymer and the derived zinc salt have a branched structure, possibly containing also some crosslinked domains. Large improvements in solvent resistance were observed for both type of polymer modifications. Received: 13 December 1996 Accepted: 10 February 1997     

Taking snapshots of photoexcited molecules in disordered media by using pulsed synchrotron X-rays

Photoexcited molecules are quintessential reactants in photochemistry. Structures of these photoexcited molecules in disordered media in which a majority of photochemical reactions take place remained elusive for decades owing to a lack of suitable X-ray sources, despite their importance in understanding fundamental aspects in photochemistry. As new pulsed X-ray sources become available, short-lived excited-state molecular structures in disordered media can now be captured by using laser-pulse pump, X-ray pulse-probe techniques of third-generation synchrotron sources with time resolutions of 30-100 ps, as demonstrated by examples in this review. These studies provide unprecedented information on structural origins of molecular properties in the excited states. By using other ultrafast X-ray facilities that will be completed in the near future, time-resolution for the excited-state structure measurements should reach the femtosecond time scales, which will make "molecular movies" of bond breaking or formation, and vibrational relaxation, a reality.     

Nanostructure evolution studies of bulk polymer materials with synchrotron radiation: progress in method development

The prospects of a modern analysis of nanostructure evolution during the processing of polymer materials by means of scattering from synchrotron radiation are demonstrated in examples. The beam sources have gained stability, shortages are located in beamline setups and in method development for the quantitative analysis of voluminous data sets.By using the proposed multidimensional chord distribution function (CDF) analysis method, nanostructure information from small-angle X-ray scattering (SAXS) data are extracted and visualised. The method can be automated if the beamline setup is able to deliver a full data set with simple constraints. In this case even a simultaneous data evaluation is possible (while one pattern is accumulated, the previous one is analysed). The advantages of the method are demonstrated in a study of the straining of a thermoplastic elastomer. The possibilities of an automated analysis are demonstrated in an investigation of the crystallisation behaviour of high-pressure injection-moulded polyethylene (HPIM-PE). The achievable results of nanostructure analysis of polymer materials are discussed. It is shown that the time-resolved SAXS of polymer materials studied during a transformation and analysed by the CDF method is not just a powerful tool to investigate the relationship between structure and properties of materials; the information that can be gained concerning the processes that control nanostructure evolution is equally important. In the future the enlightenment of such relationships may help to tailor polymer materials with respect to their properties and, beyond that, to improve assessments concerning their aging.