Practical capillary gas chromatography—a systematic approach

Capillary gc is now rapidly expanding. Naturally, initiation is most often attempted on the basis of the experience acquired with packed columns. However, such an extrapolation is successful only if a number of essential peculiarities of capillary gc are considered. Based on practical examples this paper discusses six essential details: 1) design and maintenance of the gas flow paths, 2) the greatly increased importance of sampling technique, which should not be confined just to stream splitting, 3) the problems in quantitative analysis arising from small sample size, 4) specific sources of trouble related to small amounts of liquid phase, 5) specific arguments for the choice of the carrier gas, clearly pointing to hydrogen as the ideal carrier and, 6) the different way to approach column production. Figures for all selected examples are given.     

Strukturuntersuchungen an naßersponnenen Polyacrylnitrilfasern nach der Gefriertrocknung

Zusammenfassung An unterschiedlich verstreckten und hydrothermisch nachbehandelten, danach gefriergetrockneten Polyacrylnitril-Gelfasern (PAN) wurden Messungen der Röntgenkleinwinkelstreuung (RKWS), Röntgenweitwinkelstreuung (RWWS) und Tieftemperatur-Gassorption (TTGA) durchgeführt. Die RKWS-Messungen zeigen, daß sowohl in den isotropen als auch in den orientierten Proben eine exponentialstatistische Verteilung der Form und Größe der Inhomogenitäten (Hohlräume, Cluster) vorliegt, welche durch die Kohärenzlängel _c bestimmt wird. Eine erhöhte Röntgenabsorption wurde bei den verstreckten Proben festgestellt. Die Analyse der aus der Kohärenzlänge und den Volumsanteilen der Phasen berechneten charakteristischen RK WS-Parameter (z.B. innere Oberfläche, Durchschußlänge) ergibt, daß jede Behandlung der Gelfasern eine Zu- oder Abnahme der etwa gleich großen Hohlräume verursacht (nucleotic change). Das relative Ausmaß dieser Veränderungen wird besprochen.Der Vergleich mit den Ergebnissen der TTGA an den gleichen Fasern zeigt, daß die Tendenzen bei der spezifischen Oberfläche und dem Porenvolumen (Zu- bzw. Abnahme) bei beiden Methoden annähernd gleich sind. Die Absolutwerte des Hohlraumvolumens unterscheiden sich aber z.T. um den Faktor 40. Dies führt zur Schlußfolgerung, daß mit der RK WS Faserbereiche als Hohlräume erfaßt werden, die bei der TTGA nicht angezeigt werden, weil sie für das Meßgas unzugänglich sind.

---

Structural studies on wet-spun freeze-dried polyacrylonitrile fibers

Summary Polyacrylonitrile fibers (PAN) were drawn to different extents, hydrothermally aftertreated, and at last freeze-dried. The products were studied by small angle X-ray scattering (SAXS), wide angle X-ray scattering (WAXS), and low temperature gassorption (LTGS). The SAXS data show that the shape and the size of the inhomogeneities (voids, clusters) have an exponential statistical distribution determined by the correlation lengthl _c, both in the isotropic fibers and in the fiber-oriented ones. It has also been observed that stretching always causes a higher X-ray absorption. An analysis of the characteristic SAXS parameters (e.g., internal surface, mean chord length), which were calculated from the correlation length and the volume fractions of the phases, evidences that in all samples an augmentation or diminution of the number of the voids with nearly the same shape and size takes place (nucleotic change). Its relative number has been pointed out.Comparison with the results of the LTGS investigations at the same fibers shows that the tendencies of the specific surface and porosity (increase, decrease) are approximately the same with both methods. However, the absolute values of void volume differ in some cases by the factor 40. This leads to the conclusion that the SAXS method records domains of these fibers as voids which are not registered by LTGS (voids not accessible for the gas).

Herrn em.o.Univ. Prof. Dr.Josef Schurz zum 70. Geburtstag gewidmet     

基于迭代小波变换的光谱信号本底扣除方法研究

本底会对光谱分析结果产生很大的干扰作用,为获取特征峰的有效信息,必须首先去除本底。该文提出了一种基于小波变换的本底扣除算法,通过对光谱及后续光谱迭代进行小波变换,利用逼近系数估计本底,直到本底收敛。提出了判断多次估计的本底最大误差是否足够小的收敛准则。利用该算法去除本底后,即可进行特征峰信息的提取。分别利用仿真光谱和实验能量色散X射线荧光光谱对算法进行了验证,并与传统小波变换和多项式拟合法进行了对比。结果表明,该算法能够更准确扣除光谱本底,对其他光谱的本底扣除也具有借鉴意义。     

溶致液晶中金属纳米粒子的掺杂及其作用机制研究

在用琥珀酸二异辛酯磺酸钠(AOT)构建的具有长程有序结构的层状溶致液晶内, 用不同方式导入预制的亲油或亲水贵金属纳米粒子, 可得到纳米粒子分布在不同介观空间内的无机/有机杂合体. 依据小角X射线散射和偏光显微镜结果, 通过分析掺杂纳米粒子与液晶模板的相互作用, 对掺杂前后体系结构的变化及制得杂合体的稳定性进行了表征. 结果表明, 除考虑掺杂粒子与层状模板空间的匹配外, 体系中静电斥力、范德华引力和Helfrich涨落力之间的平衡是维持液晶结构稳定的基本条件.     

Phanes with Three- and Four-Membered Rings as Building Elements

The systematic integration of the small 2π- and 4π-electron systems cyclopropenylium ion, cyclopropenone, oxo-cyclobutenylium ion, and cyclobutadiene into phane chemistry was initiated only a few years ago. [n₂]Cyclopropenylophanes, [n₂]cyclopropenonophanes, metal-capped [n₄]cyclobutadienosuperphanes, and other new families of double-decker phane species became available from cycloalkydiynes through special methods of double [2+1]cycloaddition with carbenes and metal complex induced dimerization by double [2+2]cycloaddition. Phane-specific structural features were elucidated by X-ray structural analyses. Cyclic voltammetry and PE spectroscopy as well as MO calculations reealed considerable interactions between closely spaced π-electron systems. Decapping cyclobutadienosuperphanes formally extended the synthetic principle to threefold [2+2]cycloadditions resulting in [n₄]-bridged tricyclo-[4.2.0.0^{3, 5}]octa-3,7-dienes, which represent a new type of cage compounds. Moreover, completion to fourfold [2+2]addition was achieved with the photoinduced transformation of [3₄]bridged tricyclo[4.2.0.0^{3, 5}]octa-3,7-diene into propella[3₄]cubane.     

Stochastic resonance is applied to quantitative analysis for weak chromatographic signal of glyburide in plasma

Based on the theory of stochastic resonance, a new method carried on the quantitive analysis to weak chromatographic signal of glyburide in plasma, which was embedded in the noise background and the signal-to-noise ratio (SNR) of HPLC-UV is enhanced remarkably. This method enhances the quantification limit to 1 ng ml⁻¹, which is the same as HPLC-MS, and makes it possible to detect the weak signal accurately by HPLC-UV, which was not suitable before. The results showed good recovery and linear range from 1 to 50 ng ml⁻¹ of glyburide in plasma and the method can be used for quantitative analysis of glyburide.     

Interactions of dicarboxylic porphyrins with membranes in relation to their ionization state

The interactions of dicarboxylic porphyrins with membrane systems are discussed with particular emphasis on the effect of the charge of the porphyrin and the nature of the side-chains. The incorporation of hematoporphyrin or related dicarboxylic porphyrins within small unilamellar vesicles as membrane models is favored by a decrease of the pH in the range of physiological pH values. This effect might play an important role in the retention of porphyrins by tumors, which are more acidic than normal tissues. Kinetics studies also show that the partition of the porphyrin between the lipidic bilayer and the aqueous phase is governed by its release rate rather than by its incorporation rate.     

DIFFUSION OF LONG CHAINS THROUGH A POROUS THIN GEL NETWORK

Using a core(142 nm)made of linear polystyrene(PS)chains as a seed,we further polymerized a thin layer of cross-linked PS shell(7 nm)on it in water to form a core-shell particle.Such a particle swells in toluene,which enables linear PS chains inside the core to gradually diffuse out through the porous shell.Using a combination of static and dynamic laser light scattering,we examined the chain diffusion process by following the change of the scattering intensity(i.e.the average molar mass of the particles).For the first time,we have revealed that the diffusion exhibits three stages.In the first stage,the chain diffusion through the shell is even faster than their translational diffusion in a dilute solution.The three stages respectively correspond to the change of the solution in the core from concentrated to semidilute and then from semidilute to dilute.     

High speed liquid chromatography with small bore columns

Using a specially designed column system, we have systematically investigated the effect of mobile phase velocity on column efficiency. The performance of small bore columns operated at different linear velocities of mobile phase was examined for three different types of injection system. Using the value of H^∞/u or n^∞/t${}_{\text{r}}^{\text{º}}$ as a criterion of a high speed separation, we calculated values of n/t${}_{\text{r}}^{\text{º}}$ for different solutes according to the equation \documentclass{article}\pagestyle{empty}\begin{document}$ {{\rm n}\mathord{\left/ {\vphantom {{\rm n} {{\rm t}_{\rm r}^ \circ }}}\right. \kern-\nulldelimiterspace} {{\rm t}_{\rm r}^ \circ }} = {{{\rm n}^\infty } \mathord{\left/ {\vphantom {{{\rm n}^\infty } {{\rm t}_{\rm r}^ \circ }}} \right. \kern-\nulldelimiterspace} {{\rm t}_{\rm r}^ \circ }}\left({\frac{{1 + {\rm k'}}}{{{\rm k' + }\beta }}} \right)^2 $\end{document}; the results obtained are in agreement with the experimentally determined values. These systematic investigations culminated in the separation of seven compounds in less than 10 s; the respective chromatogram is shown.     

Synthesis,characterization, and application of griseofulvin surface molecularly imprinted polymers as the selective solid phase extraction sorbent in rat plasma samples

In present study, an investigation was carried out to develop and validate an analytical method for the selective extraction and determination of griseofulvin (GSF) from plasma samples. For this purpose, a rational approach was made to synthesize and characterize the surface molecularly imprinted polymers (SMIPs). The SMIPs were utilized as solid phase extraction (SPE) sorbents. The SMIPs were prepared by using GSF as template molecule on the surface of modified silica particles through a non-covalent technique. The particles demonstrated high adsorption capacity (119.1 µg/mL), fast adsorption equilibrium time (30 min) and good recognition selectivity for the template drug. The scanning electron microscopy and infrared spectroscopy were used to explain the structural and morphological characteristics of the SMIPs and surface non-imprinted polymers. The SPE method was combined with HPLC for plasma analysis. The method validation results demonstrated that the established method possessed good linearity for GSF ranging from 0.1 to 50 µg/mL (R² = 0.997). The limit of detection for this method was 0.02 µg/mL for rat plasma samples. The recoveries of GSF from spiked plasma samples were (90.7–97.7%) and relative standard deviations were (0.9–4.5%). Moreover, the SMIPs as selective SPE sorbent can be reused more than 8 times which is a clear advantage over commercial SPE sorbents. Finally, the usefulness of the proposed strategy was assessed by extraction and detection of GSF in real rat plasma samples.