核磁共振成像一维空间编码教学实验

利用梯度磁场实现检测信号的空间编码,是核磁共振成像(MRI)的关键技术.本文采用ccc系列样品将二维问题简化为一维,使用超小型教学用核磁共振成像仪进行了一维空间编码实验研究,并对实验过程及实验结果进行了计算模拟和分析.     

0.86μm激光扫描二维成像的实验研究

本文给出作者设计的0.86μm激光二维成像系统的原理框图、成像雷达距离方程和部分物体对0.86μm激光的反射对比度的测试数据,并展示了各类物体激光成像的照片.     

用离子速度影象技术研究n-C4H9Br的光解

利用离子速度影象技术研究了正一溴丁烷(n-C4H9Br)在231~267 nm波段的光解,得出了如下结论:正一溴丁烷(n-C4H9Br)在231~267 nm波段的吸收源于基态到三个最低激发态的跃迁,这三个激发态标识为1A″、2A′和3A′;发生在这三个排斥态的势能面(PES)上的光解最终导致C4H9 Br(2P3/2)或C4H9 Br*(2P1/2)的产生;2A′和3A′态之间存在避免交叉(Avoided crossing)会影响最终的光解产物;从基态1A′到激发态1A″的跃迁矩垂直于对称面,也就垂直于C-Br键;从基态1A′到激发态3A′的跃迁矩平行于对称面,同时平行于C-Br键;从基态1A′到激发态2A′的跃迁矩在对称面内,且与C-Br键成53.1°夹角.我们也讨论了正一溴丁烷(n-C4H9Br)在234 nm和267 nm附近光解时的避免交叉几率(Avoided crossingprobability),以及它对单通道相对产额(Relative fraction of the individual pathways)的影响.     

红外动态图像生成技术概念研究

红外动态图像生成技术的基本概念包括基本术语及其定义。为了描述红外动态图像生成技术的特性,通常采用如光源类型、光谱波段、阵列规模、空间分辨率、填充因子、时间常数、帧频、闪烁、温度范围、串扰、均匀性、发射率、辐射对比度、动态范围、温度分辨率、调制传递函数、几何畸变及最大温度和最大辐射强度等概念。介绍了描述红外动态图像生成系统性能的基本概念的定义。转换器的指标定义对于转换器的设计和性能指标的测试都有重要的意义。     

“阳”加速器钼丝X-pinch初步实验研究

 在“阳”加速器上进行了直径分别为10, 15, 20 μm, 交叉角为32°,45°,60°的钼（Mo）丝X-pinch实验。“阳”加速器产生的电流峰值约520 kA，上升时间80 ns。实验中通过X射线功率谱仪和纳秒分幅相机等仪器对Mo丝X-pinch辐射特性进行了诊断。实验表明：Mo丝X-pinch过程中会出现多次X射线爆发，箍缩过程中产生的热点辐射出能量超过3 keV的X射线，探测到的最小热点直径小于30 μm。     

光学三维成像实验系统

建立光学投影层析三维成像系统,该系统包括光学成像、图像采集、断层重建及三维显示,重建算法为滤波反投影算法.实验结果表明:利用该系统得到的重建图像与样品的形状吻合,重建结果边缘清晰,伪迹较小.     

Simultaneous Measurement of Particle Size and Particle Velocity by the Spatial Filtering Technique

The objective of this study was to compare the measuring results of a fiber‐optical probe based on a modified spatial filtering technique with given size distributions of different test powders and also with particle velocity values of laser Doppler measurements. Fiber‐optical spatial filtering velocimetry was modified by fiber‐optical spot scanning in order to determine simultaneously the size and the velocity of particles. The fiber‐optical probe system can be used as an in‐line measuring device for sizing of particles in different technical applications. Spherical test particles were narrow‐sized glass beads in the range 30–100 μm and irregularly shaped test particles were limestone particles in the range 10–600 μm. Particles were dispersed by a brush disperser and the measurements were carried out at a fixed position in a free particle‐laden air stream. Owing to the measurement of chord lengths and to the influence of diffraction and divergent angle, the probe results show differences from the given test particle sizes. Owing to the particle‐probe collisions, the mean velocity determined by the probe is smaller than the laser Doppler mean velocity.     

Flow in a waterfall with large Froude number

An approximate method is developed to solve the full nonlinear equations governing two-dimensional irrotational flow in a free waterfall, falling under the influence of gravity, at high Froude number based on conditions far upstream. Schwarz—Christoffel transformation is used to map the region, in the complex potential-plane, onto the upper half-plane. The Hilbert transformation as well as the perturbation technique, for large Froude number, are used as a basis for the approximate solution of the problem. A complete solution, up to second-order approximation, for the downstream free-surfaces profiles, for different Froude number, is discussed and illustrated. The obtained approximate solutions are compared with those of other authors. Favourable agreement with other results suggests that this method is effective in dealing with flow problems strongly influenced by gravity and high Froude number. The results obtained by this method are sufficiently accurate for practical purposes.