Influence of interlayer coupling and intra-layer Coulomb interaction on electronic transport in bilayer graphene

Calculations of renormalized perpendicular conductivity within Kubo formula employing single particle temperature dependent Green's function formalism for bilayer graphene has been attempted. On the basis of numerical analysis, perpendicular conductivity as a function of temperature, interlayer coupling, onsite Coulomb interaction and carrier concentration per site has been analyzed for both AA- and AB-stacked bilayer graphene. It is found that perpendicular conductivity increases with interlayer coupling and also with temperature at low temperatures while at higher temperatures, there is saturation in perpendicular conductivity. Influences of onsite Coulomb interaction and carrier concentration per site on perpendicular conductivity is just opposite to each other while onsite Coulomb energy suppresses the rate of increase of σ_⊥/σ_⊥0 with temperature, on the other hand increase in carrier density per site enhance this rate significantly. Finally, theoretically obtained results on temperature dependent perpendicular conductivity are viewed in terms of electronic transport data as well as recent theoretical works available in bilayer graphene.     

A Novel L‐Cysteine Electrochemical Sensor Using Sulfonated Graphene‐poly(3,4‐Ethylenedioxythiophene) Composite Film Decorated with Gold Nanoparticles

By exploiting the electrostatic interaction between positively charged 3,4‐ethylenedioxythiophene cation radicals and negatively charged sulfonated graphene (SG) sheets, we prepared a poly(3,4‐ethylenedioxythiophene)‐sulfonated graphene (SG‐PEDOT) composite film by a one‐step electrochemical process. The composite was further decorated with gold nanoparticles (AuNPs) and employed as an electrode material for the detection of L ‐cysteine (Cys). The SG‐PEDOT composite film is shown to provide a rough surface for the electrodeposition of AuNPs and to improve substrate accessibility and interaction with Cys. Moreover, the AuNPs‐decorated composite exhibits better electrocatalytic performance than that of a SG‐PEDOT composite only. Under optimum experimental conditions, the amperometric current of the sensor is linearly related to the concentration of Cys in the 0.1 to 382 µM range, and the detection limit is 0.02 µM (at S/N=3). The modified electrode displays favorable selectivity, good stability and high reproducibility. The method was successfully applied to the detection of Cys in spiked human urine.     

Electrochemical Determination of Dextromethorphan on Reduced Graphene Oxide Modified Screen‐Printed Electrode after Electromembrane Extraction

In this paper, electromembrane extraction coupled with differential pulse voltammetry (DPV) on a reduced graphene oxide modified screen‐printed carbon electrode (RGO‐SPCE) for the determination of dextromethorphan (DXM) in urine and plasma has been described. DXM migrated from 4 mL of a donor phase across a thin layer of 2‐nitrophenyl octyl ether (NPOE) immobilized in the pores of a porous hollow fiber, into a 20 µL acceptor phase (HCl) present inside the lumen of the fiber. Then, 15 µL of a 0.1 M NaOH solution was added to the acceptor phase and the mixture was analyzed using DPV.     

Electrochemiluminescence Sensor for Selective Preconcentration and Sensitive Detection of Napropamide Using Water‐Soluble Sulfonated Graphene

A novel electrochemiluminescence (ECL) sensor for napropamide determination was prepared using the water‐soluble sulfonated graphene (sulfonated‐G) as solid‐phase microextraction (SPME) material, based on selective preconcentration of target onto an electrode and followed by luminol ECL detection. The effects of pH, adsorption time, buffer solution and the luminescence agent on ECL intensity were optimized. Under the optimized conditions (pH 6; adsorption time 5 min; buffer solution pH 11.0 Na₂CO₃ aHCO₃; luminescence agent luminol; stirring speed 400 rpm), the lowest detection limits (1.0 µg L⁻¹) and good linear range (r²≥0.99) were obtained for the analyte, indicating the superior performance of Nafion/sulfonated‐G/GCE for detecting napropamide.     

Mechanical properties and degradation studies of poly(D,L‐lactide‐co‐glycolide) 50:50/graphene oxide nanocomposite films

Poly(D,L‐lactide‐co‐glycolide) 50:50 (PLGA)/graphene oxide (GO) nanocomposite films were prepared with various GO weight fractions. A significant enhancement of mechanical properties of the PLGA/GO nanocomposite films was obtained with GO weight fractions. The incorporation of only 5 wt% of GO resulted in an ~2.5‐fold and ~4.7‐fold increase in the tensile strength and Young's modulus of PLGA, respectively. The thermomechanical behaviors of composite films were investigated by dynamic mechanical analysis. Results indicated that the values of T_g and storage moduli of the PLGA/GO composites were higher than those of the pristine PLGA. The improvement in oxygen barrier properties of composites was presumably attributed to the filler effect of the randomly dispersed GO throughout the PLGA matrix. In this work, we also studied in vitro biodegradation behavior. PLGA/GO composite films were hydrolyzed at 37°C for periods up to 49 days. Because of the presence of GO nanosheets, degradation of composite films took place more slowly with increasing GO amounts. Copyright © 2013 John Wiley & Sons, Ltd.     

Reinforcing epoxy resin through covalent integration of functionalized graphene nanosheets

A chemically converted graphene/epoxy (EP) resin nanocomposite has been developed through the use of the functionalized graphene nanosheets (FGNs). The FGNs were prepared via the reaction of amines with alkylcarboxyl groups attached to the graphite oxides in the course of a dicarboxylic acid acyl peroxide treatment. FGNs/EP composites were prepared by dissolving the FGNs in organic solvent followed by mixing with EP and curing agent. In this composite, the FGNs were able to create molecular entanglement with EP matrix by taking advantage of the reactions between amine groups of FGNs and EP groups of EP, thus the FGNs could be covalently integrated into the EP matrix and became part of the cross‐linked network structure rather than just a separated component. Great enhancement in the mechanical properties of the epoxy composite, such as the ultimate tensile strength and toughness, had been achieved with small loading (0.1 wt%) of FGNs by 17.0% and 262.2%, respectively. However, the FGNs reinforced EP composites showed a slight decrease in glass transition temperature (Tg). Copyright © 2014 John Wiley & Sons, Ltd.     

Graphene/activated carbon supercapacitors with sulfonated-polyetheretherketone as solid-state electrolyte and multifunctional binder

Sulfonated polyetheretherketone (SPEEK) has been synthesised by sulphonation process and used as the solid-state electrolyte, binder and surfactant for supercapacitors. Reduced graphene dispersed by SPEEK is used as a high-efficiency conducting additive in solid-state supercapacitors. It is found that SPEEK can improve the stability of the reduced graphene dispersion significantly, and therefore, the solid-state supercapacitors show a large decrease in IR drop and charge-transfer resistance (R_ct), resulting in a higher rate capability. The solid-state supercapacitors with the activated carbon/reduced graphene/SPEEK/electrode can be operated from 1 to 8 A/g and exhibit capacity retention of 93%. The noteworthy is more than twice higher value for capacity retention by comparison with the solid-state supercapacitors using activated carbon/reduced graphene/PVDF electrode (capacity retention is 36%). The cell of reduced graphene with SPEEK can be cycled over 5000 times at 5 A/g with no capacitance fading.     

Comparison Study of Phenylquinoline-based Iridium(III) Complexes for Solution Processable Phosphorescent Organic Light-Emitting Diodes by PEDOT:PSS and Graphene Oxide as a Hole Transport Layer

Electroluminescent (EL) properties of Ir(III) complex, [(2,4-diphenylquinoli-ne)]₂Iridium picolinic acid N-oxide [(DPQ)₂Ir(pic-N-O)] were investigated using PEDOT:PSS and reduced graphene oxide (rGO) as a hole transport layer for solution processable phosphorescent organic light-emitting diodes (PhOLEDs). High performance solution-processable PhOLED with PEDOT:PSS and (DPQ)₂Ir(pic-N-O) (8 wt%) doped CBP:TPD:PBD (8:56:12) host emission layer were fabricated to give a high luminance efficiency (LE) of 26.9 cd/A, equivelent to an external quantum efficiency (EQE) of 14.2%. The corresponding PhOLED with rGO as a hole transport layer exhibited the maximum brightness and LE of 13540 cd/m² and 16.8 cd/A, respectively. The utilization of the solution processable rGO thin films as the hole transport layer offered the great potential to the fabrication of solution processable PhOLEDs.     

Metal Oxide‐Coated Three‐Dimensional Graphene Prepared by the Use of Metal–Organic Frameworks as Precursors

A simple method for the preparation of metal‐oxide‐coated three‐dimensional (3D) graphene composites was developed. The metal–organic frameworks (MOFs) that served as the precursors of the metal oxides were first synthesized on the 3D graphene networks (3DGNs). The desired metal oxide/3DGN composites were then obtained by a two‐step annealing process. As a proof‐of‐concept application, the obtained ZnO/3DGN and Fe₂O₃/3DGN materials were used in a photocatalytic reaction and a lithium‐ion battery, respectively. We believe this method could be extended to the synthesis of other metal oxide/3DGN composites with 3D structures simply through the appropriate choice of specific MOFs as precursors.     

Observing High‐Pressure Chemistry in Graphene Bubbles

Using IR spectroscopy, high‐pressure reactions of molecules were observed in liquids entrapped by graphene nanobubbles formed at the graphene–diamond interface. Nanobubbles formed on graphene as a result of thermally induced bonding of its edges with diamond are highly impermeable, thus providing a good sealing of solvents within. Owing to the optical transparency of graphene and diamond, high‐pressure chemical reactions within the bubbles can be probed with vibrational spectroscopy. By monitoring the conformational changes of pressure‐sensitive molecules, the pressure within the nanobubble can be calibrated as a function of temperature and it is about 1 GPa at 600 K. The polymerization of buckministerfullerene (C₆₀), which is symmetrically forbidden under ambient conditions, is observed to proceed in well‐defined stages in the pressurized nanobubbles.