Lamb波理论及层合板冲击损伤的实验研究

从理论上分析了板中Lamb波信号的传播特性,并给出Lamb波在板中传播的频散方程。理论分析及实验均表明,Lamb波的频散特性与复合材料结构损伤有着直接的联系,而且最低阶的对称和反对称Lamb波模态对层合板的损伤比较敏感,但应用Lamb波的频散效应监测结构的损伤在检测技术上还难以实现。根据板中导波形成Lamb波的共振原理,板中应力波的幅频特性很大程度上反映了Lamb波的谐振特征。因此,利用压电元件的压电阻抗谱分析应力波的各阶模态频率及振幅对结构损伤的变化,能够反映材料内部损伤与Lamb波的频散特性。文中针对表面粘贴压电元件的层合板智能结构,建立了包含Lamb波谐振模式的压电阻抗计算模型。冲击损伤试件的实验表明,由于结构损伤的出现压电阻抗谱中的模态频率及其阻抗幅值等特征信息将发生变化。因此,引入应力波损伤因子可以对结构冲击损伤的存在和程度进行初步评价。该方法基于结构的机-电动态阻抗特性,不受结构的几何形状限制,测试用的压电元件成本低,方法简单可行,有望在智能结构的健康诊断方面获得应用。     

POLYNOMIAL SOLUTIONS TO PIEZOELECTRIC BEAMS(Ⅱ)--ANALYTICAL SOLUTIONS TO TYPICAL PROBLEMS

For the orthotropic piezoelectric plane problem, a series of piezoelectric beams is solved and the corresponding analytical solutions are obtained with the trialand-error method on the basis of the general solution in the case of three distinct eigenvalues, in which all displacements, electrical potential, stresses and electrical displacements are expressed by three displacement functions in terms of harmonic polynomials. These problems are cantilever beam with cross force and point charge at free end, cantilever beam and simply-supported beam subjected to uniform loads on the upper and lower surfaces, and cantilever beam subjected to linear electrical potential.     

压电陶瓷片在振动试验中的应用

通过压电陶瓷片在平板上进行激振和拾振试验,实测压电陶瓷片的某些性能及其对试件固有频率和振型的影响,获取压电陶瓷片的有关数据,以便对实际机械构件作分离纯模态时选配合理的激励方案。     

压电层合圆板传感器的非线性静力耦合分析

本文基于von Karman薄板非线性理论，压电基本方程和经典层合板理论，对上，下表面粘有压电传感膜层的圆薄板压力传感器的力-电耦合特性进行了定理分析。首先，针对压电层合圆板传感器件建立了考虑几何非线性变形的力-意耦合模型。给出了压电薄膜层感应电量的计算公式；然后，采用级数解法进行了求解，得到了非线性静力耦合问题的幂级数精确解，给出了传感器静态测量过程中所关心的压力-电量特征曲线和中心挠度，电量特征曲线；同时，定量讨论了压电二次效应对感应电量和层合结构中心挠度的影响。通过所得结果，在压电式压力传感器设计中，为采用电信号直接输出有关结构的变形和外界载荷等待测参量提供了依据。     

A piezoelectric stress gauge for measuring dynamic stress in soil and rock media

A piezoelectric stress gauge is described in this paper. Its major performance data are: measuring range 10⁶–10⁸ Pa, response time less than 7μs; non-linearity within ±1% and total stress measurement error within ± 10%. It can be used for measuring dynamic stress in soil, rock and concrete media as well as dynamic force and dynamic pressure in fluids.     

层合结构压电器件的机电耦合效应

压电传感器和致动器都可以看成是一种复合材料层合板结构，由压电材料层和非压电(弹性)材料层交替铺设而成。对于这类任意铺设的层合板悬臂梁结构，我们推导出了表示力学变形与外加电场之间耦合效应的解析表达式。进而，又推导出了两类(一类为单层压电-弹性层，另一类为双层压电-弹性层)层合型悬臂梁结构机电耦合性能的解析公式。在该机电耦合模型中，包括了两个压电常数d211和d222。此外，还建立了含压电材料的有限元算式，进行了实验测量。最后，通过比较解析解(包括考虑了d222参数的理论值和没有考虑d222参数的理论值)，实验值以及有限元计算结果，发现它们吻合得很好，而且考虑d222是十分必要的。     

压电空心圆柱中波的传播

应用三维压电弹性体轴对称模型对压电空心圆柱中波的传播进行了研究. 发现在 圆柱中是否具有压电性质会对波的传播带来显著的差异. 当波长趋向于零时，在压电圆柱中 拟P波的波速渐进趋向于横观各向同性弹性体的准P波波速，而非压电圆柱中拟P波的波速 渐进趋向于一维杆模型中的P波波速；在压电圆柱中拟SV波存在驻波现象. 圆柱中的SH波 同电场无关，所以在压电圆柱和非压电圆柱中SH波具有相同的频散曲线. 应用积分变 换方法将圆柱的控制方程同其侧边界条件相结合，得到了一组动力学方程. 针对具体的侧边 界条件，得到相对应的波导条件和频散方程. 在此基础上通过数值计算模拟了圆柱受到端部 应力脉冲激励后的瞬态响应. 同时讨论了空心圆柱的半径比对轴向波传播的影响.     

考虑几何与压电非线性行为压电层合轴对称圆板的精确解

研究可移简支及夹支边界条件下,轴对称压电层合圆板在强电场和机械荷载联合作用下的非线性变形.考虑电致伸缩的非线性压电效应及几何非线性的影响,导出轴对称压电层合圆板的控制方程.通过调整坐标轴的位置对控制方程进行简化,得到关于挠度和径向力的4阶非线性控制方程.再通过简单的积分并引入无量刚变量将控制方程等价地化为2阶非线性耦合微分方程组.利用幂级数法得到可移简支及夹支边界条件下强电场和均布荷载共同作用时的挠度、径向力及径向位移的幂级数精确解.通过对双、单压电晶片执行器的数值计算及分析,得到电场、外载对于位移、径向力的影响关系.     

Behavior of Piezoelectric Beams under Axially Non-uniform Distributed Loading

The paper presents a generic solution methodology for a quasi-static homogeneous monoclinic piezoelectric beam under axially distributed electric and mechanical surface loads and body forces expressed as polynomials of degree K≥ 0 of the axis variable. (In the absence of any electrical loading, this problem is known as the Almansi–Michell problem). The stress and the electrical displacement components are presented as a set of polynomials of degree ≤K+2 of the axis variable (“solution hypothesis”) containing 4K unknown tip loading constants and 3K stress functions of two variables. The cases K=0,1 stand for uniform or linear distributed loads in the axis direction. The analysis is initiated by the Kth level and continues down to lower levels. The main result of this work generalizes the “elastic” solution given recently by O. Rand and the first author (2005). Examples of solutions for axially uniform distributed loads (K=0), and equilibrium in which the stress and the electrical displacement do not depend on the axis variable, are presented. The applications to constant body loads and a hydrostatic pressure are considered.      

A photo-optical technique for measuring flow-induced vibrations in cantilevered tube bundles

A photo-optical technique has been developed for monitoring the dynamic displacement of cantilevered tubes in fluid flow. The technique employs an optical fiber to transmit light through the tube and a phototransistor array to measure the motion of the light beam that is projected from the end of the tube. The device is simple, inexpensive, and very sensitive to small displacements. Details are given for the development of the technique, analysis of performance, and static calibration. The device was tested by monitoring the dynamic response of a bundle of cantilevered tubes in both single-phase and two-phase Freon 11 flows. The results are compared with those of a standard strain gauge bridge.