S-异丙甲草胺与小牛胸腺DNA的相互作用

应用紫外光谱、荧光光谱、DNA热变性法以及黏度法研究了S-异丙甲草胺与小牛胸腺DNA(ctDNA)的相互作用. 结果表明, S-异丙甲草胺使ctDNA在200 nm处的吸收峰发生明显改变, 表现出红移和减色效应, 而对260 nm处的吸收峰产生影响较小, 排除了嵌插作用的可能; ctDNA对S-异丙甲草胺内源性荧光表现出很强的猝灭作用, 且随温度的升高, 其猝灭程度有所下降, 表明S-异丙甲草胺是以形成加合物的方式与ctDNA结合的, 并求得了它们在不同温度下的结合常数; 将不同离子强度条件下S-异丙甲草胺与ctDNA作用以及不同S-异丙甲草胺浓度下ctDNA的热变性温度和黏度变化的研究结果与紫外光谱和荧光光谱相结合, 可以判断S-异丙甲草胺是以沟槽作用的方式与ctDNA结合的.     

三聚氰胺与鯡鱼精DNA相互作用研究

采用UV、荧光光谱、电化学和粘度法等方法研究了三聚氰胺(MM)与鲱鱼精DNA的作用机制, 并采用凝胶电泳考察了MM对pBR322质粒DNA迁移作用的影响. 当pH为7.0时, 动力学参数的计算结果表明: 加入DNA前后MM电荷转移系数α分别为0.27和0.26, 速率常数k_s分别为5.58 s^-1和5.65 s^－1; 热力学研究表明MM与DNA的结合常数K约为10⁵ mol^－1•L, MM与DNA可能是以沟槽式相结合.     

撑杆式预应力钢压杆屈曲形态函数研究

基于撑杆式预应力钢压杆正对称和反对称两个基本屈曲模态, 给出了相应的 屈曲形态函数, 通过3个典型算例并变化关键参数着重研究了模拟曲线项数, 同时 给出了不对称屈曲的形态函数. 研究表明, 取形态函 数模拟项数为预应力钢压杆节间数, 可以很好满足工程精度.     

冲击荷载下单层球面网壳的失效机理

为研究单层球面网壳在冲击荷载下的失效机理,在ANSYS/LS-DYNA中建立60m跨度K8型单层球面网壳与圆柱形冲击物的数值模型并进行数值分析,总结了网壳结构的4种失效模式。通过对失效全过程的分析,从能量的角度将失效过程分为能量施加、能量传递与损失、能量消耗3个阶段。之后分别从能量传递与杆件破坏形式2方面揭示了网壳的失效机理。能量分析表明:剩余能量(Elf)对结构最终动力响应及失效模式起决定作用,而Elf只是初始冲击能量中除去冲击物穿透损失与网壳局部破坏损失后的剩余部分。通过对杆件破坏形式的分析发现:杆件的破坏可能滞后于冲击荷载的作用,且杆件的破坏形式决定其传递能量的能力,当杆件发生拉伸破坏时,其强度被充分利用,传递的能量最多,Elf值较大,网壳整体破坏严重。杆件的破坏形式与Elf及网壳整体的失效模式间有很好的对应关系。     

高压电气设备支架串联体系地震响应半解析法

针对具有集中分布参数柔性节点的多节电瓷型高压电气设备支架串联体系,通过应用分布参数梁振动理论与集中参数通过边界条件的引入,推导出其频率方程,然后通过数值方法求得频率及振型。通过应用Betti定律,推导出具有集中分布参数柔性节点的多节电瓷型高压电气设备支架串联体系振型的正交条件,应用此正交条件对集中参数与分布参数的振动方程解耦,从而得到广义质量及广义荷载,然后通过振型叠加法求解结构的地震响应。最后应用该半解析法与有限元法数值积分法对一330 KV电压互感器支架串联体系地震响应进行分析,分析结果表明,该半解析法求解的地震响应与有限元直接积分法求解的地震响应相一致,从而为具有集中分布参数柔性节点的多节电瓷型高压电气设备支架串联体系的地震响应分析和抗震设计提供了一种新的途径。     

Display of tilt information of vibrating object in time average mode using lateral shearing interferometry and interferometric grating

We have experimentally demonstrated vibration analysis of a reflecting object in time-average mode using shearing interferometry and interferometric grating. Experimental results show that time-average moiré fringes, formed between fringe pattern reflected from object and sinusoidal grating are modulated spatially by the amplitude of vibrating tilt. From the experimental results, information regarding tilt of vibrating objects can be determined.     

Compact Mode Converter System for the Cold Test of Assembled Gyrotrons

A microwave system is described which allows testing of the quasi-optical mode converter in a gyrotron, which is completely assembled except for the attachment of the electron gun. Test results are presented for a TE_6,2,1 gyrotron, and a similar design for a TE_28,7,1 gyrotron is shown.     

Dispersion Analysis of Birefringent Dielectric Grating Structure for Application in Pressure and Temperature Measurements

In this paper, the dispersion characteristics of a birefringence dielectric planar grating structure for application in pressure and temperature measurements are analyzed by a method, which combines the edge element method with rigorous mode matching approach. Analysis results show that this new anisotropic grating structure offers very high sensitivity for pressure and temperature measurements. Also it is justified that the present method has the advantages of simplicity, accuracy and suitability.     

Mode Conversion and Diffraction of Guided Optical Waves from Magnetostatic Waves under Inclined Bias Magnetic Field

The noncollinear interaction of guided optical waves with magnetostatic waves under inclined bias magnetic field is theoretically studied in detail. Similar approach can also be applied to the collinear interaction. Calculation results indicate that the diffraction efficiency (DE) in magnitude is equal to the mode-conversion efficiency (MCE) under vertical bias magnetic field, but they differ greatly under inclined bias magnetic field. By comparison to the case of vertical magnetization, the DE or the MCE can be greatly increased under inclined magnetic field. The characteristic of the DE curves obtained is basically in agreement with the experimental result.``     

连续调谐多波长主动锁模光纤激光器

利用色散补偿法纤增加腔内色散和改变调制频率,在主动锁模光纤环形激光器实验中,得到了可连续调谐的双波长激光脉冲,冷却掺铒光纤,实现了17波长的激光。