Blue electroluminescent materials based on indeno[1,2-a]arene derivatives for Organic Light-Emitting Diodes

Abstract

In this study, as a continuous effort for searching efficient blue-emitting materials, we designed and synthesized materials based on indeno[1,2-a]arene. OLED devices using these materials were fabricated in the following sequence; ITO (180?nm)/N,N'-diphenyl-N,N'-(2-napthyl)-(1,1'-phenyl)-4,4'-diamine (NPB) (50?nm)/emitting materials (30?nm)/4,7-diphenyl-1,10-phenanthroline (Bphen) (30?nm)/Liq/Al (2/100?nm). Particularly, a device using 7,7-dimethyl-7H-indeno[1,2-a]pyrene as emitter showed maximum values of luminous efficiency, power efficiency, and external quantum efficiency of 1.10?cd/A, 0.49?lm/W, 1.47% at 20?mA/cm², respectively with CIE (x,y) coordinates of (0.15, 0.08) at 6.0V.     

Voltammetric Determination of Allura Red AC onto Carbone-paste Electrode Modified by Silica with Embedded Cetylpyridinium Chloride

In current study the carbon-paste electrode modified by silica with embedded cetylpyridinium chloride for determination of Allura Red AC have been developed. The optimal conditions were determined to be for the square-wave voltammetric quantification: pH=2, E_ads=300 mV, t_ads=300 s, amplitude – 40 mV, frequency – 25 Hz and potential scan rate is 250 mV sec⁻¹. The calibration plot has linearity in the concentration ranges 0.04–0.2 μM and 0.2–1.00 μM. The LOD and LOQ are equal to 0.005 μM and 0.015 μM respectively. The crafted sensor has been applied successfully to model solutions and in jelly candies analysis with RSD no more than 10 %.     

水胁迫下典型盐生植被梭梭光谱特征分析

荒漠地区由于气候干燥，降水稀少，水分常成为制约植被生长的因素之一，水分胁迫对植物长势和产量的影响比任何其他胁迫都要大。随着高光谱技术的发展，国内外已有众多学者利用高光谱数据研究植被遭受胁迫作用，然而这些研究对象多集中于甜菜、棉花、玉米、水稻等作物，针对干旱区盐生植被遭受胁迫作用的研究较少。梭梭作为荒漠、半荒漠地区的典型盐生植被之一，具有极高的经济和生态效益。选择梭梭作为研究对象，培育一年生梭梭，并设置三个水分梯度，形成受不同水分量胁迫的梭梭。使用原始光谱、红边位置参数，结合植被指数及二维相关光谱研究其叶片光谱特征，为干旱区利用高光谱遥感监测盐生植被提供借鉴。结果表明：(1)分析梭梭叶片反射光谱曲线发现，在可见光至中红外各波段范围内，受不同水分量胁迫作用的梭梭叶片光谱反射率有显著差异。在可见光(350～610 nm)波段，各水分处理的梭梭叶片反射率依次为100 mL>500 mL>200 mL，这是由于100和200 mL水分促进梭梭内部叶绿素合成，使该波段反射率降低，而过多的水分(500 mL)对梭梭内部的叶绿素合成没有更大的促进作用。在红光区(611～738 nm)，随着水分量的增多，受不同水分量胁迫的梭梭叶片光谱反射率依次减小。在738～1 181和1 228～1 296 nm波段，受不同水分量胁迫作用的梭梭叶片光谱反射率为：200 mL>100 mL>500 mL；在1 182～1 227 nm波段，受不同水分量胁迫作用的梭梭叶片光谱反射率为：100 mL>200 mL>500 mL。这是由于植被细胞结构对近红外区域的反射率影响较大，因而受不同水分胁迫作用的梭梭叶片光谱反射率有显著差异。在1 300～1 365和1 392～1 800 nm波段，受各水分胁迫作用的梭梭叶片反射率为：100 mL>200 mL>500 mL。这表明在500 mL水分胁迫量范围内，水分越多，叶子的细胞液、细胞膜对水分的吸收能力越强，使得反射率下降。通过对原始光谱求取一阶导数并提取红边位置参数发现，各水分处理下的梭梭叶片一阶微分光谱曲线中红边位置未发生移动。这是由于梭梭在长期的干旱环境影响下，形成了特殊的适应机制，水分对其红边位置影响不敏感。(2)选取若干植被指数分析各水分处理下的梭梭光谱指数变化。当水分胁迫量由100 mL增至200 mL时，WI/NDWI，MSI和NDII指数值变化显著，可用于研究水分胁迫下梭梭的光谱特征。(3)使用二维相关光谱技术分析受各水分胁迫作用的梭梭光谱特征，得出在100 mL水分胁迫下，在536，643，1 219和1 653 nm波段处，吸收峰对水分的微扰敏感；在200 mL水分胁迫下，在846和1 083 nm波段处，吸收峰对水分的微扰敏感；在500 mL水分胁迫下，在835和1 067 nm波段处，吸收峰对水分的微扰敏感。总之，在近红外波段，与100 mL水分量相比，梭梭受200和500 mL水分量胁迫时，吸收峰对水分的微扰敏感度上升。由100 mL水分胁迫下梭梭的二维同步相关谱图可知，1 044和1 665 nm，1 072和903 nm，903和1 264 nm，1 230和1 061 nm波段处形成正交叉峰，表明这些波段处光谱强度随水分的干扰同时变化。     

Synthesis of nonplanar bipyridyls bridged by disilane and disiloxane and their phosphorescent copper complexes

Disilane- and disiloxane-bridged bipyridyls ( DSBPy and DSOBPy ) were prepared and their optical properties were investigated in comparison with those of previously reported monosilane- and monogermane-bridged counterparts. The UV–visible absorption and photoluminescence bands of DSBPy and DSOBPy were blue-shifted as a result of elongation of the bridging units from monosilane and monogermane to disilane and disiloxane, likely due to the enhanced twisting of the bipyridyl units. Phosphorescent complexes DSBPy–Cu and DSOBPy–Cu were prepared by the interaction of DSBPy and DSOBPy with Cu₂I₂(PPh₃)₂. X-ray diffraction studies of their single-crystal structures revealed polymeric structures composed of repeat units of DSBPy or DSOBPy and [Cu^II(PPh₃)]₂. Organic light-emitting diodes with the ITO/PEDOT:PSS/ DSBPy–Cu or DSOBPy–Cu :PCTSQ/TAZ/Al structure were fabricated to examine the applications of the complexes as electroluminescent materials. The devices emitted yellow light with emission maxima at approximately 600 nm, and maximal luminance reached 120 and 190 cd m⁻² for devices based on DSBPy–Cu and DSOBPy–Cu , respectively. The performance of the DSOBPy–Cu -based device was improved by using TAZ as the dopant of the emissive layer, and luminance was increased to 390 cd m⁻².     

Phosphorescent κ3-(N^C^C)-Gold(III) Complexes: Synthesis,Photophysics, Computational Studies and Application to Solution-Processable OLEDs

Efficient OLED devices have been fabricated using organometallic complexes of platinum group metals. Still, the high material cost and low stability represent central challenges for their application in commercial display technologies. Based on its innate stability, gold(III) complexes are emerging as promising candidates for high-performance OLEDs. Here, a series of alkynyl-, N-heterocyclic carbene (NHC)- and aryl-gold(III) complexes stabilized by a κ³-(N^C^C) template have been prepared and their photophysical properties have been characterized in detail. These compounds exhibit good photoluminescence quantum efficiency (η_PL) of up to 33 %. The PL emission can be tuned from sky-blue to yellowish green colors by variations on both the ancillary ligands as well as on the pincer template. Further, solution-processable OLED devices based on some of these complexes display remarkable emissive properties (η_CE 46.6 cd.A⁻¹ and η_ext 14.0 %), thus showcasing the potential of these motifs for the low-cost fabrication of display and illumination technologies.     

Ultrasonic-assisted synthesis of nano-sized metal-organic framework; a simple method to explore selective and fast Congo Red adsorption

A novel mixed linker Metal-organic Framework, [Co(NH₂IsoBDC)(bpfn)].DMF (TMU-69), with amide and amino functionalized spacers (bpfn = N,N'-(naphthalene-1,5-diyl)diisonicotinamide, NH₂IsoBDCH₂ = 5-Aminoisophthalic acid) was synthesized through both solvothermal and ultrasonic approaches. Applying sonochemical irradiation led to ultrafast formation of Flower-shaped nanoplates of TMU-69 within 15 min with high yield while, solvothermal method takes 3 days to form the framework. Control of size and morphology was also enhanced through applying ultrasonic irradiations. The implication of applied time and concentration of reagents on size and morphology of nano-structured TMU-69 have been optimized. Applying higher concentration of initial material with optimized 60-minute irradiation forms uniform smaller sized nanoplates of TMU-69. Also, the efficiency of TMU-69 bulk and nanoplates toward removal of pollutant dyes from water was investigated. The selective adsorption of Congo Red was observed among other dyes. Also, drastic enhancement in removal kinetic of Congo Red through using ultrasonic assisted nanoplates of TMU-69 was obtained.     

红细胞分布宽度与心房颤动负荷的关系研究

目的观察病态窦房结综合征患者心房颤动负荷与红细胞分布宽度（RDW）的关系。方法选择病态窦房结综合征植入永久性人工心脏起搏器的患者81例，回顾性分析患者入院时基本资料、血常规及生化指标。记录术后3个月起搏器记录的心房颤动负荷。根据患者心房颤动负荷分为高负荷组及低负荷组，比较分析两组患者RDW及相关临床资料。结果心房颤动高负荷组患者RDW（15.61±1.23）%，高血压比例71%，明显高于低负荷组的（13.50±1.03）%、46%（P＜0.01或0.05）。高负荷组左心房直径、左心室舒张末期内径、WBC、TG、TC均大于低负荷组（P＜0.01或0.05）。心房颤动负荷影响因素的logistic回归分析显示，RDW是心房颤动负荷高的预测因素（OR=10.32，P＜0.01）。高TG、高血压、高胆固醇也是心房颤动高发的预测因素。结论心房颤动负荷除与年龄，高血压有关外，还与RDW明显相关。RDW可成为病态窦房结综合征患者心房颤动负荷的预测因素之一。     

NARROW BANDWIDTH BRIGHT SCARLET ORGANIC ELECTROLUMINESCENT DEVICE BASED ON N,N'-BIS[4-(N,N-DIMETHYLAMONO)-BENZYLIDENE]-DIAMINOMALEONITRILE DYE

A novel red dye, N, N'-bis[4-(N,N-dimethylamino)-benzylidene]diaminomaleonitrile (BAM), was prepared by reacting diaminomaleonitrile with 4-(N,N-dimethylamino)-benzaldehyde and were characterized by ¹H NMR, UV absorption and photoluminescence. The BAM dye showed an absorption peak wavelength of 530 nm and bright photoluminescence with a peak wavelength at 675 nm. It was used as the doped emitter for fabricating a bright scarlet organic electroluminescent (EL) device. The structure of the double-layer EL device consisted of a hole-transport layer and a luminescent layer between ITO glass and magnesium electrodes. The hole-transport layer was a poly(N-vinylcarbazole) (PVK) film. The luminescent layer consisted of a host material, 8-hydroxyquinoline aluminum (Alq₃), and BAM dye as the dopant. A bright light with the peak of 620 nm and narrow bandwidth of 50 nm was obtained in the device with a maximum luminance of 6230 cd/m². The emission spectra almost unchanged as the luminance increased with increasing injection current and the bias voltage. A tentative explanation from both the electronic distribution viewpoint and the molecular geometric analysis for the narrow bandwidth of this red dye was offered.     

基于闭环二苯醚与磷氧基团的主体材料的合成及其在蓝色磷光有机发光二极管中的应用

本文通过多步有机反应制备了化合物9-苯基-9′-（4-二苯基氧化膦）苯基-氧杂蒽[diphenyl（4-（9-phenyl-9H-xanthen-9-yl）phenyl）phosphine oxide,DPPO],低温磷光发射光谱测试表明该化合物具有高的三线态能级（2.88eV）,它可以作为天蓝色磷光发光材料双（4,6-二氟苯基吡啶-N,C2）吡啶甲酰合铱[bis（3,5-difluoro-2-（2-pyridyl）phenyl-（2-carboxypyridyl）iridium（Ⅲ）,FIrpic,ET=2.62eV]的主体材料.将主体材料DPPO用于蓝色磷光有机发光二极管中,该器件在100cd/m2的亮度下,电流效率和流明效率分别达到30.6cd/A和19.2lm/W,最大外量子效率达到13.6%.