Elaborating E/Z-Geometry of Alkenes via Cage-Confined Arylation Catalysis of Terminal Olefins

A visible light photosensitizing metal-organic cage is applied as an artificial supramolecular reactor to control the reaction of aryl radicals with terminal olefins under green light/solvent conditions, which facilitates selective transformation in the confined enzyme-mimicking environment to give a series of geometrically defined E/Z-alkenes. The hydrophobic cage displays good host–guest inclusion with aromatic substrates, promoting Meerwein arylation and protecting E-isomeric products during reaction; while a small amount of benzonitrile can turn on efficient E→Z isomerization. Besides π–π stacking, the hydrogen bonding and halogen bonding interactions also act as control forces for the arylation of aliphatic terminal olefins known as poor acceptors in classic Meerwein arylation. The application of this switchable cage-confined arylation catalysis has been demonstrated by the syntheses of Tapinarof and a marine natural product from the same substrate via controllable E/Z selectivity.     

热管堆在不同基体材料下的燃耗特性分析北大核心CSCD

热管冷却核反应堆具有非能动传热、模块化和固有安全性高等特点,在航空探索、深海作业和偏远地区电力市场上有广泛的应用。以洛斯阿拉莫斯国家实验室开发的5 MWth热管堆为研究对象,选择SS-316,Mo-14Re和SiC作为基体候选材料,采用反应堆蒙特卡罗中子输运分析程序对比分析了以上三种基体堆芯的反应性、中子能谱、增殖性能和燃耗演化。结果表明:为了维持堆芯的10年运行,SS-316,Mo-14Re和SiC三种基体堆芯所需的初始燃料235U富集度分别约为19.35%,28.80%和17.10%,SiC基体堆芯所需的初始燃料235U富集度最小;10年后,SiC基体堆芯产生的易裂变核素(239Pu和241Pu)和次锕系核素(通过分离嬗变可被再次利用)的量最高,分别约为11.91 kg和92.08 g。综合以上研究结果,推荐SiC作为热管冷却核反应堆的基体。     

Evaluation of relative importance of ultrasound reactor parameters for the removal of estrogen hormones in water

The growing interest in sonochemistry as a tool for environmental remediation leads to the need for process optimization. Sonochemistry is a complex process, which depends on physical parameters and also on the process conditions. Physical parameters are interrelated and therefore a systematic approach has to be taken to optimize the process. The effect of physical parameters on the destruction of seven estrogen hormones (17α-estradiol, 17β-estradiol, estriol, 17α-ethinylestradiol, 17α-dihydroequilin, estrone and equilin) is reported in this study. Artificial neural networks (ANN) was used as a tool to identify the correlations between these process parameters. ANN enabled the establishment of relationship between sonication parameters such as power density, power intensity, ultrasound amplitude, as well as the reactor design parameters. The major significance was attributed to the area-specific power density and the volume-specific power intensity. The results of this work provide a sound basis to design pilot and full-scale ultrasound treatment systems. Process optimization lead to a 5-fold decrease in energy consumption as compared to the commercially available reactors, thereby making the process attractive for field applications.     

Complementarity of CFD, experimentation and reactor models for solving challenging fluidization problems

Experimentalists, numerical modellers and reactor modellers need to work together, not only just for validation of numerical codes, but also to shed fundamental light on each other＇s problems and underlying assumptions. Several examples are given, Experimental gas axial dispersion data provide a means of choosing the most appropriate boundary condition （no slip, partial slip or full slip） for particles at the wall of fluidized beds. CFD simulations help to identify how close ＂two-dimensional＂ experimental columns are to being truly two-dimensional and to representing three-dimensional columns. CFD also can be used to provide a more rational means of establishing assumptions needed in the modelling of two-phase fluidized bed reactors, for example how to deal with cases where there is a change in molar flow （and hence volumetric flow） as a result of chemical reactions.     

中子成像技术在元素分析中的应用

中子成像作为一种快速、直观的无损检测技术,在核工业、航空航天、新能源、地质、考古、先进制造等多个领域得到广泛应用。中子成像利用中子不带电、穿透能力强、对轻元素敏感、可区分同位素和近邻元素等特性,非常适合开展含氢元素、近邻元素和同位素等材料的无损检测。本文概述了中子成像技术的基本原理及特点,并结合中国先进研究堆(CARR)中子成像装置上的应用案例, 重点介绍了国内外中子成像技术在储氢材料、燃料电池、岩石、核燃料元件、古代文物等领域的典型应用。随着中子成像技术的不断发展和广泛应用,有望为我国更多领域研究提供更强有力的技术支撑。     

无水五硼酸钾晶体高温性质振动光谱的研究

利用自行设计的反应器研究了高温条件下水蒸汽对无水五硼酸钾晶体结构的影响,借助于X射线衍射、红外光谱、Raman光谱等手段分析了无水五硼酸钾晶体高温性质的振动光谱。在水蒸汽的作用下,五硼酸钾的B₂O₃/K₂O(摩尔比)变小,X射线衍射分析表明750 ℃时晶体中有K₅B₁₉O_<sub>31存在,而红外光谱与Raman光谱分析表明由于水蒸汽的作用使得晶体中的三角形B₍₃₎—O结构单元向四面体B₍₄₎—O结构单元转变,四面体的B₍₄₎—O含量增加并且硼氧网络结构被进一步打断。     

非绝热聚合波的数学模拟

对非绝热波聚合体系进行了数学模拟, 将反应器尺寸与聚合波关联, 建立了非绝热条件下蔓延聚合波波速和最大波温的数学模型; 利用所建模型计算不同引发剂浓度、 不同环境温度、 不同试管直径下淀粉接枝聚合波的波速和波温, 并与实验测定值进行了比较. 结果表明, 非绝热聚合波的数学模型对无相变体系的拟合结果令人满意, 对聚合波的发生条件及反应器尺寸的影响有很好的预见性; 另一方面, 对于存在相变及与环境有质量交换的波聚合体系, 所建模型的预测性受到了限制.     

WO3–SiO2 nanomaterials synthesized using a novel template-free method in supercritical CO2 as heterogeneous catalysts for epoxidation with H2O2

A series of tungsten oxide-silica (WO₃–SiO₂) composite nanomaterials were synthesized through a novel, template-free sol-gel method, in which supercritical-CO₂ (scCO₂) was utilized as synthesis medium. The efficacy of the synthesis method stems from a tailored reactor design that allows the contact of the reactants only in the presence of scCO₂. Selected synthetic parameters were screened with the purpose of enhancing the performance of the resulting materials as heterogeneous catalysts in epoxidation reactions with H₂O₂ as environmentally friendly oxidant. A cyclooctene conversion of 73% with epoxide selectivity of > 99% was achieved over the best WO₃–SiO₂ catalyst under mild reaction conditions (80 °C), equimolar H₂O₂ amount (1:1) and low WO₃ loading (~2.5 wt%). The turnover number achieved with this catalyst (TON = 328), is significantly higher than that of a WO₃–SiO₂ prepared via a similar sol-gel route but without supercritical CO₂, and that of commercial WO₃. A thorough characterization with a combination of techniques (ICP-OES, N₂-physisorption, XRD, TEM, STEM-EDX, SEM-EDX, FT-IR and Raman spectroscopy, XPS, TGA and FT-IR analysis of adsorbed pyridine) allowed correlating the physicochemical properties of the WO₃–SiO₂ nanomaterials with their catalytic performance. The high catalytic activity was attributed to: (i) the very high surface area (892 m²/g) and (ii) good dispersion of the W species acting as Lewis acid sites, which were both brought about by the synthesis in supercritical CO₂, and (iii) the relatively low hydrophilicity, which was tuned by optimizing the tetramethyl orthosilicate concentration and the amount of basic solution used in the synthesis of the materials. Our optimum catalyst was also tested in the reaction of cyclohexene with H₂O₂, resulting in cyclohexane diol as main product due to the presence of strong Brønsted acid sites in the catalyst, whereas the reaction with limonene yielded the internal epoxide as the major product and the corresponding diol as side product. Importantly, the catalyst did not show leaching and could be reused in five consecutive runs without any decrease in activity.     

One-pot polyvinyl chloride preparation utilizing polyacrylate latex with tertiary amine groups for improved thermal stability,toughness, and reduced reactor scaling

In this paper, crosslinked polyacrylate latex with tertiary amine groups (ACLN) and base latex without tertiary amine groups (ACL) were prepared by emulsion polymerization using butyl acrylate as the monomer and 1,4-butanediol dimethacrylate as the crosslinker. Composite resins of polyvinyl chloride (PVC), ACL/PVC and ACLN/PVC, were prepared by suspension polymerization of vinyl chloride in a 20 L high-pressure reactor by adding ACL and ACLN as modifiers. The inner pressure of the reactor and initiator concentration as a function of reaction time during suspension polymerization were studied. Morphology of resin particles, processing properties, thermal stability and mechanical properties of ACL/PVC and ACLN/PVC products were investigated. A commercial PVC product named PVC-SG5 was used as the control sample for comparison. It was found that compared with typical PVC-SG5 preparation, ACL/PVC fabrication took less time while initiator concentrations needed to be increased to 2400 ppm in ACLN/PVC preparation in order to complete the polymerization within the same time. Reactor scaling occurred during ACL/PVC preparation, but could be avoided in ACLN/PVC preparation owing to the hydrophilicity of ACLN. The morphology of ACL/PVC and ACLN/PVC particles was smooth microspheres and mosaic particle shapes, respectively, the diameter of which were all smaller than PVC-SG5 particles. The covalent-bonding existing in ACL/PVC and ACLN/PVC, and ionic-bond formation of quaternary ammonium in ACLN/PVC composite resins, between tertiary amine groups in ACLN and chlorine atoms in PVC, contributed to the dramatic increase in thermal stability. ACLN/PVC exhibited the shortest plasticizing time and the longest elongation at break, followed by ACL/PVC. The toughness of both ACL/PVC and ACLN/PVC were greatly enhanced without affecting the tensile strength and softening temperature of the resin. Thus, three issues, namely, low thermal stability, low toughness and reactor scaling during polymerization of PVC have been comprehensively solved by introducing ACLN to PVC through a one-pot method.     

Sonochemical reactions at 640 kHz using an efficient reactor. Oxidation of potassium iodide

Ultrasound can be used to oxidize aqueous pollutants. However, due to economic reasons higher oxidation/destruction rates and higher energy efficiency are needed. Recent studies suggest that the higher ultrasound frequencies provide better oxidation rates than the conventional 20 kHz. Another area for improvement is reactor configuration. We have tested two new reactor configurations with proper focusing and reflection of ultrasound for maximum utilization. Reactor configuration plays an important role in the overall efficiency. In the new reactors, transducers and reaction mixture are separated by a polymer acoustic window which allows efficient transfer of ultrasound energy and not the heat from the transducer to the reaction mixture. One reactor at 640 kHz provides a 100% enhancement over the best reported rate for the oxidation of potassium iodide, on a per-Watt basis. Experiments conducted at varying initial KI concentrations show interesting behavior. Increasing the KI concentration by over eight fold merely increases the iodine production rate by two fold. This suggests that in the oxidation region surrounding the bubble, the KI concentration is much different than in the bulk. It is proposed that the hydrophobic bubble region has lower and near saturation KI concentration.