金属冲击温度的辐射法测量问题

 金属的冲击温度及熔化温度测量对构建其完全状态方程具有重要意义。简要综述了用于金属冲击温度及熔化温度辐射法测量的一维热传导理想界面模型和非理想界面模型，并着重对模型中明示或隐含的关键假定的合理性、影响金属冲击温度与熔化温度结果的主要因素进行了分析、讨论，以期对实验数据有一个合理的评估。还讨论了求解理想和非理想界面模型一维热传导方程界面温度时所隐含的冲击压缩下热导率不随温度而变、冲击压缩下金属样品/窗口界面辐射的灰体假定，以及窗口材料的透明性、非理想界面模型中表观界面温度的修正、动载条件下金属高压熔化温度的测量、界面的非Flourier热传导等问题。分析结果表明，目前采用辐射法测量大致可以得到冲击温度，在发生熔化的情况下可获得熔化温度，但离精密测量的要求还有较大差距。     

Nusselt number correlations for heat transfer to small spheres in thermal plasma flows

Seven different equations predicting heat transfer rates to small spheres in plasma flows are examined considering argon and nitrogan as plasma gases from 300 to 21,000 K at 1 atm. For argon there is a general consensus up to 9000 K, beyond which wide deviations in behavior occur. For nitrogen, the seven correlations are in good agreement up to 4000 K, but show substantial deviations beyond this value. Comparisons with the sparsely available experimental data are made for argon from 300 to 17,000 K and for nitrogen up to 5500 K. Disagreement between the various correlations and experiment can exceed one order of magnitude.     

理想气体吸热和放热的讨论

根据热力学第一定律和理想气体状态方程推导了理想气体的热容量公式,并对理想气体在p-V图上的直线过程和循环过程的温度变化及吸热和放热进行了讨论.     

Elastic and Thermophysical Properties of Poly(Vinyl Chloride) and Chlorinated Polyethylene Blends

The results of experimental and theoretical investigations of elastic and thermophysical properties of poly(vinyl chloride) (PVC) and chlorinated polyethylene (CPE) blends are presented. Eight types of specimens with different ratios of weight contents of PVC and CPE (PVC/CPE = 100/0, 90/10, 80/20, 60/40, 40/60, 20/80, 10/90, and 0/100) were tested. The effect of blend composition on the elastic constants (tensile and shear modulus) is discussed. The data on the thermal conductivity, thermal diffusivity, and heat capacity of the blends investigated are also presented.     

作物覆盖条件下土壤中水热分布的稳态数值比较

本文应用非饱和多孔介质中传热传质的数学模型,考虑到作物根系和冠层的影响,对稳态情况下圆柱形士壤床中的水热分布进行了数值计算模拟。在不同环境条件下对土壤中的水热分布也进行了模拟计算。同时,在相同环境条件下对有作物覆盖的土壤床和无作物覆盖的土壤床中的水热分布也进行了模拟比较。文中数值模拟的结果较好地反映了实际情况。     

Effect of particle charging on momentum and heat transfer from rarefied plasma flow

The features of interaction of a spherical metallic particle with a rarefied thermal plasma flow due to the presence o charges-electrons and ions in the gaseous phase-are considered. Analytical expressions describing charge, momentum, and energy exchange between the plasma and the particle für the cases of strong and weak Debye screening are obtained. It is illustrated that the efficiency of particle heating in the plasma considerably grows as compared with a hot molecular gas due to participation of electrons and ions in file transfer processes.     

电热泵用于蔬菜温室供热的经济性分析

现代化蔬菜温室是我国都市农业发展中的一个重要组成部分，目前这类温室的冬季加热均以燃煤方式为主．伴随着越加严重的城市环境污染，温室供热系统也面临着改造问题，需要引入清洁供热方式，热泵供热是其中的一种．本文以上海地区现代化蔬菜温室为研究对象，分析了蔬菜温室中使用电热泵供热的运行成本，并与燃煤供热方式进行了对比．就热泵供热系统在温室中的应用前景及可行性、经济性进行了分析，为热泵在温室供热系统中的应用提供了可参考依据．     

采用热处理方法提高MEH-PPV单层聚合物有机发光二极管发光性能的研究

对以MEH－PPV为发光层的单层聚合物有机发光二极管（OLED）器件在最佳条件下进行真空热处理，并用金相显微镜观察施加电压后器件的阴极表面形貌。发现处理后的器件阴极表面的气泡及黑斑明显减少。器件的发光性能显著提高。与未经处理的器件相比，最大相对发光强度提高了一个数量级、启亮电压降低了2．0V，半寿命提高了12．7倍。初步分析表明热处理方法提高器件发光性能的主要原因在于有效地减少了器件在工作过程中由于焦耳热产生的某些气体，从而减少阴极表面气泡及黑斑的出现，另一方面，热处理方法也增强了有机发光层与阴极接触界面的结合力，提高电子注入水平。     

Upward and downward heat and mass transfer with miniature periodically operating loop thermosyphons

Upward and downward two-phase heat and mass transfer has been considered in the present paper. The heat and mass transfer with the condenser located below the evaporator has been obtained by inserting an accumulator tank in the liquid line of a loop thermosyphon and enforcing a pressure pulsation. In previous papers these heat transfer devices have been called pulsated two phase thermosyphons (PTPT). A mini PTPT has been experimentally investigated. It has shown a stable periodic heat transfer regime weakly influenced by the position of the condenser with respect to the evaporator. In contrast a classical loop mini thermosyphon (diameter of connecting pipes 4 mm) did not achieve a stable functioning for the investigated level differences between evaporator and condenser lower than 0.37 m. The present study shows that the functioning of a PTPT device does not directly depend on the level difference or the presence of noncondensable gas. In order to obtain a natural circulation in mini or micro loops, a periodically operating heat transfer regime should therefore be considered.     

三维内肋管内插入螺旋扭带的强化传热实验

本文分别以水和乙二醇为工质，在Ｒｅ数范围为：６００～４００００，Ｐｒ数范围为：５．５～１１０之间，对四根分别插入三种不同扭率螺旋扭带的三维内助管内的换热和流阻特性进行了实验研究。结果表明：三维内肋管内加装扭带的强化传热技术适用于低Ｒｅ数下高Ｐｒ数工质的管内对流换热强化。根据实验值得到了流阻和换热关联式。