Development of Piezoelectric Immunosensor for the Detection of Probiotic Bacteria

A Quartz Crystal Microbalance (QCM) based direct immunosensor was developed for real-time detection of probiotic bacteria. To optimize the immunosensor system, model measurements were carried out with bovine serum albumin (BSA) and anti-BSA IgG (a-BSA) antibody. During the model experiments, two kinds of self-assembled monolayers were created to compare their efficiency on antigen binding. Sulfosuccinimidyl 6-[3-(2-pyridyldithio)propionamido] hexanoate (sulfo-LC-SPDP) and 16-mercapto-hexadecanoic acid (MHDA) cross-linking agents were used for immobilizing anti-BSA antibody onto the gold surface of the AT-cut quartz wafer. Two different measuring procedures, flow-through and stopped-flow methods, were applied, and the frequency responses obtained by both analytical methods were compared.

After the model experiments probiotic bacteria, Bifidobacterium bifidum O1356 and Lactobacillus acidophilus O1132 serotypes were detected from buffer solution and from real samples (spiked milk samples, acidophilus, and bifidus milk samples).

Using the novel immunosensor, the target bacteria could be detected in the range of 10⁴–10⁷ colony-forming units (CFU)/ml within 60 minutes. The selectivity of a-Bifidobacterium bifidum and a-Lactobacillus acidophilus antibody coated sensors were also tested.     

Elaboration of nanometric amorphous silica from quartz-based minerals using the fluorination method

A method of elaboration of nanometric amorphous silica is proposed using a rational processing of quartz-based ores with the help of a fluorination method. The different steps of the process are described, including the kinetics of the interaction mechanism of ammonium bifluoride with the initial raw materials, the sublimation of ammonium fluorosilicate and the formation of nanometric amorphous silica. Rate constants and activation energy of the chemical reactions are calculated.     

Laser processing of micro-optical components in quartz

Laser induced backside wet etching combined with the diffractive gray tone phase mask has been used for the fabrication of a micro-lens array with a single lens diameter of 1 mm and a micro-prism in quartz. The micro-lens array was tested as beam homogenizer for high power XeCl excimer laser yielding a clear improvement in the quality of the laser beam.The optimum fluence range for fabrication of micro-lenses by laser induced backside wet etching using 1.4 M pyrene in THF solution and 308 nm irradiation wavelength is 1-1.6 J/cm². The etching mechanisms of LIBWE are based on a combination of pressure and temperature jumps at quartz-liquid interface.     

The water-silicas interfacial interaction energies

The water-silicas interfacial interaction energies were calculated for samples of quartz, silicas and silicas outgassed at high temperatures using own and published data of the spreading pressure of water, its surface tension, its contact angle and using formulas obtained by the combination of the Young equation with a general equation of pair interaction. The values obtained for 18 different samples were in the range 7.80-6.92 kJ mol⁻¹. Lower values of energies are for samples that contain relatively less amounts of water at P/P₀ = 0.25 and are characterized also by relatively low values of surface pressures.     

Quartz Crystal Microbalance monitoring the real-time binding of lectin with carbohydrate with high and low molecular mass

A Quartz Crystal Microbalance (QCM) was used to monitor the mass changes on a quartz crystal surface containing immobilized lectins that interacted with carbohydrates. The strategy for lectin immobilization was developed on the basis of a multilayer system composed of Au–cystamine–glutaraldehyde–lectin. Each step of the immobilization procedure was confirmed by FTIR analysis. The system was used to study the interactions of Concanavalin A (ConA) with maltose and Jacalin with Fetuin. The real-time binding of different concentrations of carbohydrate to the immobilized lectin was monitored by means of QCM measurements and the data obtained allowed for the construction of Langmuir isotherm curves. The association constants determined for the specific interactions analyzed here were (6.4 ± 0.2) × 10⁴ M^− 1 for Jacalin–Fetuin and (4.5 ± 0.1) × 10² M^− 1 for ConA–maltose. These results indicate that the QCM constitutes a suitable method for the analysis of lectin–carbohydrate interactions, even when assaying low molecular mass ligands such as disaccharides.     

Birefringence dispersion in a quartz crystal retrieved from a channeled spectrum resolved by a fiber-optic spectrometer

We present a simple method for measuring the wavelength dependence of both the phase and group birefringences in a quartz crystal of known thickness. The method utilizes interference of polarized waves resolved by a fiber-optic spectrometer as a channeled spectrum (spectral fringes). The fringe order versus the precise position of the interference maximum in the spectrum is fitted to the approximate function, from which the phase birefringence as a function of wavelength is retrieved. We also determine the group birefringence dispersion. The functions measured in a range from 500 to 900 nm are compared with those resulting from the available dispersion relation, and very good agreement is confirmed.     

Thickness-shear vibration of a quartz plate connected to piezoelectric plates and electric field sensing

We study thickness-shear vibration of a quartz plate connected to two piezoelectric ceramic plates with initial deformations caused by a biasing electric field. The theory for small deformations superposed on finite biasing deformations in an electroelastic body is used. It is shown that the resonant frequencies of the incremental thickness-shear vibration of the quartz plate vary with the biasing electric field. The biasing electric field induced frequency shift depends linearly on the field. Therefore this effect may be used for electric field sensing. The dependence of the electric field induced frequency shift on various material and geometric parameters is examined. When the electric field is of the order of 100 V/mm, the relative frequency shift is of the order of 10⁻⁵. The case when the piezoelectric plates are replaced by piezomagnetic plates is also investigated for magnetic field sensing, and similar results are obtained.     

Use of quartz crystal nanobalance to study the binding and stabilization of albumin and doxycycline on a thin layer of hydroxyapatite

This study reports the use of quartz crystal nanobalance (QCN) to study the adsorption of two model molecules namely albumin and doxycycline by hydroxyapatite (HA). The work focuses on the deposition of a stable coating of HA on the quartz crystal, modification of the coating using doxycycline and its subsequent effects on albumin adsorption. The uniformity and thickness of the HA coating has been studied using atomic force microscopy (AFM). The functional groups to ascertain the presence of the selected moieties have been characterized by Raman spectroscopy. The results indicate that the mass of albumin deposited on the surface of the HA coated quartz crystal functionalized with doxycycline shows a substantial increase when compared to the standard HA coated quartz crystal. The adsorbed albumin has also been found to be retained for an enhanced period of time. This surface immobilization of doxycycline and subsequent albumin adsorption seem to be a promising approach to confer biomaterials with antithrombogenic and antibacterial surfaces.     

Measuring modulated luminescence using non-modulated stimulation: ramping the sample period

Conventional methods of recording linearly modulated (LM) optically stimulated luminescence (OSL) require control over either the exciting light intensity, or the ability to pulse the source. For many light sources (e.g. constant-power CW lasers, arc lamps and synchrotrons) this can be problematic. Directly analogous results to LM-OSL can, however, be achieved with non-modulated excitation sources, by ramping the sample period (RSP) of luminescence detection. RSP-OSL has the distinct advantage over LM-OSL in that, since the excitation remains at full power, data accumulation times (that can be considerable) can be reduced by typically 50%. RSP methods are universally applicable and can be employed, for example, where the excitation source is constant heat, rather than light: here, iso-thermal decay of phosphorescence becomes recorded as a sequence of peaks, corresponding to de-trapping of charge from different defect levels, and is particularly useful for analysing shallow-trap effects. RSP methods are also useful in providing significant compaction of data sets, where signal analysis is required of overlapping systems having a wide range of decay kinetics.