Practical uses of FTIR spectroscopy in wood science and technology

Based on own research activities this survey demonstrates the potential applications of FTIR spectroscopy in wood and wood-product research. This rapid method can be used e.g. with success for determination of lignin in woody materials and pulps. Crucial analytical data of lignins were also determined by quantitative evaluation of FTIR data. The degree of substitution of cellulose derivatives can be estimated. The course of delignification during pulping was monitored using transmission and circular ATR cells for the IR spectroscopy of the cooking liquors. Based on these spectra the Kappa number of pulps can be predicted.     

Studies on polymers and composites from lignin and fiber derived from sugar cane

Sugarcane fiber (i.e. bagasse) lignin has a larger fraction of aromatics unsubstitution in the ortho position than hardwood or softwood lignin and hence has the greater ability to be derivatized. Furthermore, organosolv lignin has a higher purity than sulfonated and kraft lignins. This work examines the purification of organosolv lignin derived from bagasse and the physico‐chemical properties of the lignin and lignin‐phenol formaldehyde (PF) resin coatings, and composites. The wetability tests have shown that lignin and lignin‐PF resin films are effective water barrier coatings, though the contact angles of lignin‐PF resin films were considerably less than the wax films. The overall mechanical properties (i.e. peak stress, peak strain and modulus) of the bagasse fiber composites were lower than the values obtained with the composites without the inclusion of bagasse fiber. Copyright © 2007 John Wiley & Sons, Ltd.     

Influence of media nutrients on synthesis of lignin peroxidase from Aspergillus sp

The effect of carbon and nitrogen sources, lignocellulosic substrates, and metal ions on lignin peroxidase (LiP) activity of Aspergillus sp., which was isolated from a mangrove area, was studied. Glucose (1%) was found to be the best carbon source. Among the various lignocellulosic substrates used, coir pith at 3% concentration increased LiP activity twofold on the second day of incubation. Peptone and KNO₃ completely inhibited the enzyme synthesis while (NH₄)₂SO₄ at 12.5 mM produced maximum activity. Since seawater contained all the requisite metal ions, any added ions had a negative effect on activity. Cu²⁺ had the most inhibiting effect while K⁺ the least. When all the optimized conditions were provided, in nitrogen- and carbon-sufficient medium, a maximum LiP activity of 345 U/mL was obtained on the second day of incubation.     

The electrochemistry and determination of Ligustrazine hydrochloride

Ligustrazine is one of the active ingredients contained in Ligusticum chuanxiong Hort. (Umbelliferae), which is widely used in traditional Chinese medicine for the treatment of cardiovascular problems. In this work, the electrochemistry of Ligustrazine hydrochloride (LZC) and its determination are investigated. The detection limit is estimated to be 8.0×10^–8 M, with three linear ranges from 1.0×10^–6 to 1.0×10^–4 M, 1.0×10^–4 to 5.0×10^–4 M, and 6.5×10^–4 to 1.6×10^–3 M. The method has been proved to be highly sensitive, selective, and stable, and has been successfully applied to determining LZC in LZC injections.     

Purification and characterization of a laccase from the white-rot fungus Trametes multicolor

The wood-degrading fungus Trametes multicolor secretes several laccase isoforms when grown on a simple medium containing copper in the millimolar range for stimulating laccase synthesis. The main isoenzyme laccase II was purified to apparent homogeneity from the culture supernatant by using anion-exchange chromatography and gel filtration. Laccase II is a monomeric glycoprotein with a molecular mass of 63 kDa as determined by sodium dodecylsulfate polyacrylamide gel electrophoresis, contains 18% glycosylation, and has a pI of 3.0. It oxidizes a variety of phenolic substrates as well as ferrocyanide and iodide. The pH optimum depends on the substrate employed and shows a bell-shaped pH activity profile with an optimum of 4.0 to 5.0 for the phenolic substrates, while the nonphenolic substrates ferrocyanide and 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulfonate) show a monotonic pH profile with a rate decreasing with increasing pH.     

Lignin‐based polymers via graft copolymerization

Lignin is an important source of synthetic materials because of its abundance in nature, low cost, stable supply, and no competition to the human food supply. Lignin, a cross‐linked phenolic polymer, contains a large number of aromatic groups that can be used as a substitute for petroleum‐based aromatic fine chemicals. However, modification of lignin is necessary for its application in advanced materials due to its chemically inert nature and structural complexity. Polymeric modification of lignin via graft copolymerization represents an important avenue for modification because this method forms stable covalent bond linkages between lignin and synthetic functional polymers. In this review, we discuss recent synthetic strategies toward polymeric modification of lignin using graft copolymerization and the special properties and applications of the produced lignin copolymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3515–3528     

Lignin and Lignin-Derived Compounds for Wood Applications—A Review

Improving the environmental performance of resins in wood treatment by using renewable chemicals has been a topic of interest for a long time. At the same time, lignin, the second most abundant biomass on earth, is produced in large scale as a side product and mainly used energetically. The use of lignin in wood adhesives or for wood modification has received a lot of scientific attention. Despite this, there are only few lignin-derived wood products commercially available. This review provides a summary of the research on lignin application in wood adhesives, as well as for wood modification. The research on the use of uncleaved lignin and of cleavage products of lignin is reviewed. Finally, the current state of the art of commercialization of lignin-derived wood products is presented.     

Sulfuryl Fluoride Mediated Synthesis of Amides and Amidines from Ketoximes via Beckmann Rearrangement

A metal-free and redox-neutral method for Beckmann rearrangement employing inexpensive and readily available SO₂F₂ gas is described. The reported transformation proceeds at ambient temperature and is compatible with a wide range of sterically and electronically diverse aromatic, heteroaromatic, aliphatic and lignin-like oximes providing amides in good to excellent yields. The reaction proceeds through the formation of an imidoyl fluoride intermediate that can also be used for the synthesis of amidines.     

Copper-Mediated Conversion of Complex Ethers to Esters: Enabling Biopolymer Depolymerisation under Mild Conditions

Selective processing of the β-O-4 unit in lignin is essential for the efficient depolymerisation of this biopolymer and therefore its successful integration into a biorefinery set-up. An approach is described in which this unit is modified to incorporate a carboxylic ester with the goal of enabling the use of mild depolymerisation conditions. Inspired by preliminary results using a Cu/TEMPO/O₂ system, a protocol was developed that gave the desired β-O-4-containing ester in high yield using certain dimeric model compounds. The optimised reaction conditions were then applied to an oligomeric lignin model system. Extensive 2D NMR analysis demonstrated that analogous chemistry could be achieved with the oligomeric substrate. Mild depolymerisation of the ester-containing oligomer delivered the expected aryl acid monomer.     

Lignin,a biomass crosslinker,in a shape memory polycaprolactone network

This work reports a new direction of natural lignin valorization, which utilizes lignin to produce crosslinked polycaprolactone (PCL) via a straightforward synthesis. Lignin's hydroxyl groups of its multibranched phenolic structure allow lignin to serve as crosslinkers, whereas the aromatic groups serve as hard segments. The modified natural lignin containing alkene terminals is crosslinked with a thiol‐terminal PCL via Ru‐catalyzed photoredox thiol‐ene reaction. The high rate of gel contents measured for all crosslinked polymers, with the least being 84% of gel content, indicates efficient crosslinking. The prepared flat rectangular shape lignin‐crosslinked PCL sample demonstrates rapid thermal responsive shape memory behavior at 10 °C and 80 °C showing interconversion between a permanent and temporary shape. The melting temperature of the lignin‐crosslinked PCL is tunable by varying the percent weight of lignin. The 11, 21, and 30 wt % lignin demonstrated T_m of 42 °C, 35 °C, and 26 °C, respectively. The role of lignin as a crosslinker presented in this work suggests that lignin can serve as an efficient biomass‐based functional additive to polymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2121–2130