Ionic Association and Mobility IV. Ionophores in Dimethylsulfoxide at 25°C

The results of conductance measurements on pyridinium picrate, tetraphenylo-sonium picrate, potassium picrate, tetraphenylantimony picrate, tetrapropylam-monium, tetrafluoroborate, tetramethylammonium hexafluorophosphate ion association noncoulombic interaction in dimethyl sulfoxide (DMSO) at 25°C in the concentration range 1–15×10^–4 M are reported. The data were analyzed by the Justice modification of the Fuoss–Hsia equation. Except for pyridinium picrate all salts studied were found to be associated.Application of the Justice Barthel–Bjerrum model of ion association permitted calculation of the noncoulombic portion of the potential of mean force, W _±. Ionic limiting conductances were calculated for six ions using known values of previously determined transport numbers. A table of most current limiting ionic conductances for a variety of ions in DMSO at 25°C has been established.     

Preparation of a sulfonated fused-silica capillary and its application in capillary electrophoresis and electrochromatography

In the present paper, two new methods, sol-gel and chemical bonding methods, were proposed for preparation of sulfonated fused-silica capillaries. In the sol-gel method, a fused-silica capillary was coated with the sol solution obtained by hydrolysis of 3-mercaptopropyltrimethoxysilane (MPTS) and tetramethoxysilane, and followed by age; while in the chemical bonding method, a capillary was chemically bonded directly with MPTS. Then, both the resulting capillaries were oxidized with an aqueous solution of hydrogen peroxide solution (H2O2) (30%, m/m) to obtain the sulfonated capillaries. The electroosmotic flow (EOF) for the sulfonated capillaries was found to remain almost constant within the studied pH range, and greater than that of the uncoated capillary. However, the coating efficiency of the capillary prepared by chemical bonding method was higher than that by sol-gel method, by comparing their magnitude of the EOF, the degree of disguise of the silanol and reproducibility of preparation procedure. The effects of the electrolyte's concentration and the content of methanol (MeOH) on the EOF were also studied. Especially, the study of the apparent pH (pH*) on the EOF in a water-MeOH system was reported. Finally, capillary electrophoretic separation of seven organic acids was achieved within 6.5 min under optimal condition using the chemically bonded sulfonated capillary. Moreover, separation of four alkaloids on the sulfonated capillary was compared with that on uncoated capillary in different conditions. Ion-exchange mechanism was found to play a key role for separation of these four basic analytes on the sulfonated capillary.     

Cycloarsanes (AsCF3)n (n = 4, 5) – Precursors for the Highly Reactive Diarsene F3CAs=AsCF3

Tetrakis(trifluoromethyl) cyclotetraarsane (F₃CAs)₄ ( 2 ) was used to repeat the UV initiated [4+2]‐cycloaddition reaction of the diarsene F₃CAs=AsCF₃ ( 1 ) with cyclohexa‐1,3‐diene (CHD) and to isolate single crystals of the cycloadduct 4 for a X‐ray diffraction analysis. 4 crystallizes in the space group and contains the diarsene group in its E‐configuration. 2 was also applied for [2+2]‐cycloaddition reactions of 1 with tBuC≡P and MeC≡CNⁱPr₂, but in contrast to positive results with (F₃CP)₄ the products were too labile for isolation. However, 2 was successfully used at room temperature as precursor for coordinating 1 as π‐donor ligand to the Pd(PPh₃)₂ complex fragment yielding η²‐bis(trifluoromethyl)diarsene‐bis(triphenylphosphane)‐palladium(0) 5 , which was characterized by X‐ray diffraction of single crystals and by spectroscopic investigations (NMR, IR, MS). Attempts to prove the existence of the diarsene 1 , generated by different methods, by spectroscopic studies very probably failed due to its extreme reactivity, not allowing the necessary concentrations for detection. Quantum chemical calculations of the stability of 1 with respect to dimerization, the stability of the [2+2]‐cycloadduct with 1‐di(isopropyl)aminopropyne and the energy difference between 4 and the 2,3‐dimethyl‐1,3‐butadiene cycloadduct of 1 were performed to understand the considerable differences between 1 and the related diphosphene F₃CP=PCF₃.     

Matrix effects and selectivity issues in LC-MS-MS

Summary Chlorobenzenes, triazine and phenylurea herbicides were separated by normal micellar electrokinetic chromatography (MEKC) and by micellar electrokinetic chromatography with reversed flow (RF-MEKC) in running buffers containing organic solvents. The relationship between the two techniques is similar to that between reversed-phase and normal-phase HPLC. Using RF-MEKC, the separation of lipophilic compounds is often improved compared to normal MEKC. The migration in MEKC and in RF-MEKC was characterised by lipophilic and polar indices. The experimental values of the lipophilic indices of the compounds tested in the two techniques were close to the indices in reversed-phase HPLC (RP-HPLC). This enables the use of the indices determined in RP-HPLC for predicting the effects of changing composition of the running buffers on migration times in MEKC and in RF-MEKC. Presented at Balaton Symposium '01 on High-Performance Separation Methods, siófok, Hungary, September 2–4, 2001     

Polymer crystallization dynamics,as reflected by differential scanning calorimetry. Part 2: Numerical simulations

With the aid of a model for the kinetics of polymer crystallization, as put forward in previous publications, the shape of DSC-curves and their position on the temperature scale were simulated for various conditions of heat transfer in the apparatus. It turns out that the outcome is very dependent on the assumptions made with respect to these heat transfer conditions. For the ideal condition — no temperature differences between sample, pan and furnace — an invariable shape is predicted for the DSC-curves. They only shift to lower temperatures with increasing cooling rates. For more realistic conditions, the curves not only shift but become broader and their maxima decrease. They show a more familiar appearance. These calculations are very involved, however, A simple balance equation is shown to yield equivalent results, if a dimensionless characteristic number like the Nusselt number remains considerably smaller than one. This number contains an effective heat transfer coefficient between sample and furnace which, surprisingly, should not be too high. Apparently, the heat capacity of the pan does not play an important role under these conditions. This is investigated in Appendix II. Appendix I describes the procedure of the numerical simulations.     

Reaction of hexafluoropropylene and its oligomers with acetone oxime

Reactions of perfluoropropylene and its oligomers with acetone oxime in the presence of a base afford perfluoroalkyl and/or perfluoroalkenyl ethers of acetone oxime. When heated to 100 °C, the 3-perfluoro-2-methyl-2-pentenyl ether of acetone oxime (3) is quantitatively converted to 4-hydroxy-3-methyl-5,5-bistrifluoromethyl-4-pentafluoroethyl-1-pyrroline (4), the structure of which was established by X-ray diffraction analysis. A convenient one-stage synthesis of perfluoro-3-isopropyl-4-methyl-3-penten-2-one (7) was proposed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1068–1072, June, 1994.     

Thermodynamic characterization of different actin isoforms

Summary The thermodynamic properties of the cardiac and skeletal a-actin isoforms were studied to characterize the molecular bases of the functional differences between them with the method of differential scanning calorimetry (DSC). The thermal properties of the actin filaments were described in the presence of calcium and magnesium ions as well. Based on the calculated free energy changes the α-cardiac actin filaments appeared to be more stable in its physiologically more relevant, magnesium saturated form. The magnesium saturated form of the α-cardiac actin filaments seemed to be more stable compared to the calcium saturated form of it. The enthalpy and entropy changes could differentiate between the α-cardiac and α-skeletal actin isoforms and between the calcium and magnesium saturated cardiac actin isoforms as well. Our results can demonstrate that the few differences between the amino acid sequences of the α-actin isoforms have an influence on the thermal properties and maybe on the function of these proteins as well.     

Reaction ofo-aminobenzohydroxamic acid with aldehydes

The reaction of o-aminobenzohydroxamic acid with aliphatic, aromatic, or heterocyclic aldehydes leads to the formation of derivatives of 3-hydroxy-1,2-dihydroquinazolin-4-one. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 115–117, January, 1997.     

Investigation of the phosphinyl analog of α-ketoglutaric acid

It was shown by³¹P and¹³C NMR spectroscopy that methyl(3-carboxy-3-oxopropyl)phosphinic acid (4-methylhydroxyphosphinyl-2-oxobutyric acid) (1) and the amide (2) of the latter exist in keto forms in non-aqueous solutions. In aqueous solutions an equilibrium between the keto,gem-diol, and enol forms has been observed. The proportions of the diol and enol forms increase as the acidity of the media increases. Silylation of acid 1 with hexamethyldisilazane gives the tris(trimethylsilyl) derivative of enol form (3) (Z- andE-isomers).Translated fromIzyestiya Akadetnii Nauk. Seriya Khimicheskaya, No. 1, pp. 125–128, January, 1994.     

Voltammetry in Undiluted Acetic Acid. In Situ Determination of Water

Water present in undiluted acetic acid can be monitored in situ with Pt and Au microelectrodes using differential pulse and square‐wave voltammetries. Both reduction and oxidation peaks can be obtained. The best quantitative analytical results were obtained for the anodic peak, the Pt microelectrode, and differential pulse voltammetry. The anodic water peak is located at +1.55 V vs. the quasi reference Pt electrode. The voltammetric peak obtained at Pt electrode is apparently not a diffusional one, however, the calibration plot obtained by employing this peak is linear over a wide concentration range, up to 4 mol dm^?3. The detection limit has been estimated as 2.3 mM or 0.0043 v/v%. The developed method may be particularly useful, since the Karl Fischer method can not be used to determine water in glacial acetic acid due to the estrification reaction of acetic acid with methanol. A voltammetric wave of undiluted acetic acid could not be obtained in the positive and negative ranges of potential.