Surface strain-field determination of tympanic membrane using 3D-digital holographic interferometry

In order to increase the understanding of soft tissues mechanical properties, 3D Digital Holographic Interferometry (3D-DHI) was used to quantify the strain-field on a cat tympanic membrane (TM) surface. The experiments were carried out applying a constant sound-stimuli pressure of 90 dB SPL (0.632 Pa) on the TM at 1.2 kHz. The technique allows the accurate acquisition of the micro-displacement data along the x, y and z directions, which is a must for a full characterization of the tissue mechanical behavior under load, and for the calculation of the strain-field in situ. The displacements repeatability in z direction shows a standard deviation of 0.062 µm at 95% confidence level. In order to realize the full 3D characterization correctly the contour of the TM surface was measured employing the optically non-contact two-illumination positions contouring method. The x, y and z displacements combined with the TM contour data allow the evaluation its strain-field by spatially differentiating the u(m,n), v(m,n), and w(m,n) deformation components. The accurate and correct determination of the TM strain-field leads to describing its elasticity, which is an important parameter needed to improve ear biomechanics studies, audition processes and TM mobility in both experimental measurements and theoretical analysis of ear functionality and its modeling.     

基于ybar-y图的光学结构计算方法研究

本文基于y_bar-y图, 建立了计算光学系统一阶结构的数学模型, 并利用粒子群优化算法对模型进行了求解, 可以自动优化出各种光学系统的一阶结构. 编写了一套含图形用户界面(GUI)的软件, 将光学系统的基本设计要求进行处理后导入GUI, 求解之后利用商用光学设计软件如ZEMAX等, 将一阶结构转换为实际透镜结构, 然后经过透镜优化, 就可以设计出满足要求的光学系统. 根据本文所提出的光学结构计算方法, 首先进行了1300万像素手机摄像物镜的设计, 该物镜使用了4片非球面, 各项性能指标能够满足设计要求. 然后设计出一套头盔显示光学系统的目镜, 使用了两片非球面透镜实现了90°的视场角, 其他的性能指标也都满足要求. 两类光学系统的设计实例验证了该方法是一种可靠的光学系统一阶结构获取方法.     

基于CPCI总线的雷达数据采集与控制系统显控软件设计

CPCI总线作为PCI总线的加固版本,目前已成为计算机上流行的高速外设接口总线。在工业自动化领域,进行数据采集和控制基本上也都是通过这一成熟技术来实现的。本文简要介绍该测量雷达和数据采集与控制系统的基本结构,以及CPCI总线标准,重点分析显控软件的功能需求,采用自顶向下的设计,并在VC环境下基于MFC架构利用多线程和双缓存技术以及多种ActiveX控件进行显控软件设计。实现了对测量雷达的控制以及对雷达回波的原始数据的实时存取和绘制。     

高效率钙钛矿发光二极管的研究进展

钙钛矿发光二极管(LED)由于高的发光色纯度、颜色连续可调、可溶液法制备和材料成本低等优势,被认为是下一代高清柔性显示和平面照明应用最有前景的候选材料之一,受到科学界和产业界的广泛关注。在过去的几年里,钙钛矿LED取得了快速的发展,发光颜色已经实现了从紫外光到近红外光的全覆盖,其中绿光、红光和近红外光的外量子效率均超过了20%。本文首先介绍了钙钛矿LED的基本知识,随后综述了本课题组近年来在高效率钙钛矿LED制备方面取得的研究进展,最后结合领域内的一些代表性工作,分析了领域发展中存在的不足,并对未来产业化应用的前景进行了展望。     

The warm inflationary universe

In the past decade, the importance of dissipation and fluctuation to inflationary dynamics has been realized and has led to a new picture of inflation called warm inflation. Although these phenomena are common to condensed matter systems, for inflation models their importance has only recently started to be appreciated. The article describes the motivation for these phenomena during inflation and then examines their origins from first principles quantum field theory treatments of inflation models. Cosmology today is a data intensive field and this is driving theory to greater precision and predictability. This opens the possibility to consider tests for detecting observational signatures of dissipative processes, which will be discussed. In addition, it will be discussed how particle physics and cosmology are now working in tandem to push the boundaries of our knowledge about fundamental physics.     

One-dimensional integral imaging based on parallax barrier

One-dimensional integral imaging (1DII) which only has horizontal disparity is a practical solution of high resolution in the vertical direction, low-cost, easy-viewable three-dimensional (3D) display. A 1DII based on a parallax barrier is proposed in this paper. The 1DII consists of a parallax barrier and a display panel. The operation principle and parameter calculation of the 1DII are described in detail. Two prototypes of the proposed 1DII and conventional 1DII based on a lenticular lens array are developed. The proposed 1DII improves the quality of the 3D image and provides larger viewing angle than that based on a lenticular lens array, and it is simpler and has lower cost than that based on a lenticular lens array.     

染料掺杂光子晶体荧光带隙边缘的激射研究

利用激光全息光刻技术, 在重铬酸盐明胶 感光材料中制备了掺杂有机染料的层状光子晶体. 在532 nm纳秒脉冲激光激励下, 样品的荧光光谱表现出良好的带隙特征; 随着抽运能量的增加, 在荧光带隙带边位置获得了激射光, 并进一步研究了光子晶体的带边位置与染料荧光峰的匹配对激射的影响.带边位置越靠近染料的荧光峰, 激射阈值越低, 反之则不易产生激射.该研究为超低阈值光子晶体激光器的发展提供了思路和方法. 关键词： 全息光刻 光子晶体 荧光带隙 低阈值激射     

Hybrid diffractive-refractive 67°-diagonal field of view optical see-through head-mounted display

Design of a wide-angle off-axis optical see-through head-mounted display (HMD) becomes a challenge since its weight and size are constrained by human factors. Diffractive optics has the potential to play a key role in several areas of head-mounted display. They can reduce size and weight while providing some unique functions that would be difficult to implement with conventional refractive optics. This paper presents a 67°-diagonal field of view, wide spectral band hybrid diffractive-refractive see-through head-mounted display (HMD) using off-axis optics. It possesses a 10 mm exit pupil and a 22 mm eye relief, and satisfies the requirements of human factors. The whole optical system is suitable for a 20 mm-diagonal color liquid crystal display (LCD) with XGA resolution.     

Recording of PIV images on photothermoplastic plates

In this paper we explore the possibility of utilizing commercially available photothermoplastic plates as recording support in Particle Image Velocimetry (PIV), to allow real time analysis of recorded data. An experimental apparatus has been developed which allows holographic recording and reconstruction of simulated PIV images. We show that double exposed photothermoplastic plates can successfully be analysed provided that a suitable recording/reconstruction scheme is used.     

实验评估全息凹面光栅平场摄谱仪

阐述ＳＰＤ－Ｉ型全息凹面衍射光栅平场摄谱仪的基本工作原理和仪器结构，详细报导了该仪器的适用波长范围、平直谱面长度、倒数线色散率和光谱带宽等主要技术性能的光学测试方法和实验结果。测量结果表明在设计波长范围（４００至８００ｍｍ）内像差校正良好，获得的平直谱面可与光敏面长度为一英寸（２３．５ｃｍ）的多通道探测器相配；仪器的色散相当均匀（约１７ｎｍ／ｍｍ），在５７９．９６ｎｍ波长处测得的光谱带宽为１ｎｍ，能满足一般光学多通道分析仪的要求。