A domain decomposition method for three species modeling of multi-electrode negative corona discharge – With applications to electrostatic precipitators

The negative corona discharge problem for multi-electrode geometries is modeled by a three species model. The equations are solved using domain decomposition, by recognizing that multiple species are only present in a small part of the domain, and hence only need to be incorporated locally in the model.The method is applied to an industrially relevant three wire electrostatic precipitator geometry. The calculated current density is in good agreement with experimental data. To further illustrate applications of the three species solution, it is used for coupled particle, fluid, and electrostatic simulations to analyze particle collection properties.     

Quantitative analysis of oxidative DNA damage induced by high-voltage pulsed discharge with cavitation

Pulsed discharge is used for sterilization and disinfection, but the details of the molecular mechanisms remain largely unknown. Since pulsed discharge generates reactive oxygen species (ROS), we analyzed the oxidative DNA damages after pulsed discharge treatment to consider the involvement of ROS in the damaging process. We applied pulsed discharge with cavitation to plasmid DNA molecules and estimated the yields of the damages by agarose gel electrophoresis. The treated DNA contained various oxidative DNA damages, including single and double strand breaks and base lesions. The yields of the damages increased in response to the energy used for pulsed discharge. We also measured the yield of 8-hydroxyguanine (8-OH-G), one of the major oxidative base lesions, in the treated plasmid DNA by mass spectrometry quantitatively and found that the yield of the oxidative base lesion corresponded to the increment of the applied energy. In addition, we observed the involvement of mutM gene, which is responsible for repair of 8-OH-G, in the increased sensitivity of Escherichia coli to pulsed discharge. Therefore, ROS seem to mediate the sterilization ability of pulsed discharge.     

Effect of relative humidity on current–voltage characteristics of monopolar DC wire-to-plane system

This paper deals with the DC monopolar corona discharge in wire-to-plane geometry under variable humid air conditions. The classical formulas of Townsend commonly used for the current–voltage characteristics were used to determine the various corona parameters for the both polarities of the corona discharge. A circular biased probe has been adapted to the plane and is used to measure the ground plane current density and electric field during the monopolar corona discharge. A new approach to the problem of corona discharge in transmission system has been described in this paper. The effect of varying the humidity and wires diameter is also investigated. The values of the electric field and the current density are maximum beneath the corona wire and decrease when moving away from them and the current–voltage characteristics follow the quadratic Townsend's law. The experimental results show that the monopolar corona discharge is strongly affected by the air humidity. The current density and the electric field are measured and compared with the computed values. The agreement between the calculated values and those obtained experimentally is satisfactory. The per unit electric field and current density are also represented by a unique function.     

Study of ozone generation in an atmospheric dielectric barrier discharge reactor

Ozone (O₃) generation in a dielectric barrier discharge (DBD) reactor driven by a pulsed power supply was investigated at atmospheric pressure and room temperature. An O₃ generation efficiency model is established in which discharge power, O₂ concentration, gas flow rate, and volume of the discharge space are included. Constants in the O₃ generation efficiency model were obtained by fitting the model with experiment results. O₃ concentration can be simply calculated from the energy density and initial O₂ concentration. Comparison on O₃ concentrations from calculation with references is given.     

Surface charge dynamics studied by the temporal evolution of the corona charging current

The decay of surface charges deposited on the dielectric material by the partial discharge (PD) activity has a great impact on the repetition of partial discharges. In this work, the effect of dielectric placed on the surface of ground electrode in a needle-plane configuration on the discharge activity was investigated, with the application of a periodic negative step voltage. The charge decay mechanisms on a corona charged dielectric surface were investigated based on a comparison between experiments and a FEM-based numerical model. The comparison indicates that the surface charges may decay due to different mechanisms depending on the applied stress.     

Glow Discharge Characteristics of Hollow Needle-Plate Electrode in Atmospheric Pressure ArgonSCIEI北大核心CSCD

Atmosphere pressure uniform plasma has the broad application prospect in the industrial field. Using hollow needle cathode - plate anode device excited by direct-current voltage, a uniform and stable glow discharge is generated at atmospheric pressure in ambient air with argon used as working gas. The influence of the experimental parameters (including gas flow rate and the gas gap width) on discharge has been investigated by optical method. It can be found that a glow-discharge plasma column can bridge the two electrodes. The plasma column is uniform, and no filaments can be discerned. Near the plate electrode, the diameter of the plasma column is largest of all positions. The maximal diameter of the plasma column increases with increasing the discharge current or the gas flow rate. Through electrical method, the voltage-current characteristic has been investigated. It has been found that the discharge voltage decreases with increasing the current which is similar with the characteristic of glow discharge in low pressure. It increases with increasing the gas gap width or the gas flow rate. By analyzing the optical emission spectrum scanning from 330 to 450 nm emitted from the direct-current glow discharge, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated as functions of the gas flow rate and gas gap width. Results indicate that both the vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 decrease with increasing the gas flow rate or the gas gap width. In addition, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated in spatial resolution along the direction of gas flow(plasma column axial), and give a qualitative analysis as well. It is found that the vibrational temperature and the average electron energy increase with increasing the distance from the hollow needle cathode. These results are important to the industrial applications of glow discharge.     

基于RTW的双向充放电机实时控制技术

随着智能电网和绿色能源技术的快速发展,双向充放电机也越来越受到关注;文章主要研究双向充放电机充电过程中电压的稳定性和放电过程中并网电流波形的畸变率;提出了一种基于RTW的matlab/simulink控制方法,在simulink环境下搭建仿真模型和控制模型,然后将达到预期效果的仿真模型所对应的控制模型编译为代码并烧写到DSP中;此种方法在能够保证在恒流源和恒压源两种充电模式中电流和电压的稳定性,在放电过程中并网谐波电流总畸变率小于5%,功率因数基本为1;仿真结果和基于DSP2812的硬件平台实验都证明了这种方法的有效性。     

非链式HF/DF激光器的研究进展

HF/DF激光器是中红外波段能提供最高能量输出的激光光源,也是中红外波段应用非常广泛的相干光源。本文介绍了近几年国内外关于非链式HF/DF激光器的研究进展及其成果应用,分析了非链式HF/DF激光器在应用方面的优缺点,总结了实现非链式HF/DF激光输出的关键技术和存在的问题,指出了该技术的未来发展方向。     

Micro-arc ignition on the oily surface of capacitively-coupled plasma

Micro-arc ignition on the oily surface is investigated in a capacitively-coupled plasma (CCP) system. In this system, micro-arc generation is enhanced by increased level of plasma potential, which is induced by a DC-grounded coil between blocking capacitor and the powered electrode. The images of micro-arcs are captured with very short exposure time of 20 μs using intensified charge-coupled device triggered by a high speed comparator and the focused ground electrode is partially soiled with oil. The micro-arcs are observed only on the oily surface of the electrode. This observation provides that the oily surface of CCP is very weak for micro-arc ignition and micro-arc ignition is supposed to be enhanced by the oil evaporation and the thin oil layer, considering the RF Paschen breakdown of the oil vapor within the sheath and the dielectric breakdown of thin oil layer.     

Pulsed microwave-driven argon plasma jet with distinctive plume patterns resonantly excited by surface plasmon polaritons

Atmospheric lower-power pulsed microwave argon cold plasma jets are obtained by using coaxial transmission line resonators in ambient air.The plasma jet plumes are generated at the end of a metal wire placed in the middle of the dielectric tubes.The electromagnetic model analyses and simulation results suggest that the discharges are excited resonantly by the enhanced electric field of surface plasmon polaritons.Moreover,for conquering the defect of atmospheric argon filamentation discharges excited by 2.45-GHz of continued microwave,the distinctive patterns of the plasma jet plumes can be maintained by applying different gas flow rates of argon gas,frequencies of pulsed modulator,duty cycles of pulsed microwave,peak values of input microwave power,and even by using different materials of dielectric tubes.In addition,the emission spectrum,the plume temperature,and other plasma parameters are measured,which shows that the proposed pulsed microwave plasma jets can be adjusted for plasma biomedical applications.