Silicate Xerogels with Dopant-Induced Chirality

A series of silicate xerogels with entrapped chiral amino acids have been obtained via sol-gel technology. The transparent, glassy samples obtained exhibit chirality in the bulk due to the presence of the entrapped asymmetric molecules. Measurements of the optical activity of the doped xerogel samples revealed that the entrapment did not significantly influence the optical activity observed for liquid solutions of the amino acids. Thus, the sol-gel method enables the preparation of amorphous optical materials exhibiting properties of strictly spatially defined molecular systems. Apart from the obvious optical applications, such porous materials with asymmetric centers might find interesting applications in chiral chemical syntheses and separations.     

Effects of Oxygen and Water Vapor on Volatile Organic Compounds Decomposition Using Gliding Arc Gas Discharge

The combined effects of oxygen and water vapor on three typical volatile organic compounds, i.e. tetrachloromethane, n-butane and toluene, decomposition efficiency under gliding arc gas discharge conditions are studied. The electron density and the density of the reactive radicals such as O and OH are modified by addition of oxygen and water vapor. Consequently, the decomposition process can be enhanced or suppressed, depending on the involved chemical structures and reaction channels. The addition of oxygen and water vapor suppresses the tetrachloromethane decomposition which indicates that this process is mainly controlled by the electron dissociation reactions. By contrast, the n-butane and toluene decompositions are enhanced, which shows that they can be mainly ascribed to the radical induced reactions. Especially, in a moist atmosphere the OH radicals are supposed to play the most important role in the n-butane decomposition process.     

Si-tolerance of iron doped Pt/alumina catalyst in the total oxidation of VOC

Summary In the present study the effects of addition of iron on the catalytic activity and Si tolerability of Pt/g-Al₂O₃in the total oxidation of volatile organic compounds were investigated. Preliminary results showed that there is a noticeable improvement effect on Si-tolerance of catalyst, particularly for short term poison exposure. Bulk analysis of deposited silicon on the catalyst surface indicated that both Pt/g-Al₂O₃and iron-doped pellets had roughly the same silicone uptakes. Deactivation of catalyst was reversible and much faster for iron doped sample. The promoting effects of iron were related to its electronegativity and, to blocking of fewer Pt sites when iron is present at the surface of the catalyst.     

Low volume sampling device for mass spectrometry analysis of gas formation in nickel-metalhydride (NiMH) batteries

Rechargeable nickel-metalhydride (NiMH) batteries have major advantages with respect to environmental friendliness and energy density compared to other battery systems. Research on thermodynamics and reaction kinetics is required to study the behaviour of these batteries, especially under severe operating conditions such as overcharging and (over)discharging. During these processes several reactions take place resulting in the formation of oxygen and hydrogen gas. Hence, the recombination processes should be well controlled to guarantee that the partial oxygen and hydrogen pressure inside the battery are kept low.Mass spectrometry is one of the analytical techniques capable of measuring the composition of gases released inside the battery during the charge and discharge processes. However, the sample gas needs to be withdrawn from the battery during the experiment. The gas consumption must be kept to a minimum otherwise the equilibrium inside the battery will be disturbed. A bench-top quadrupole mass spectrometer with a standard capillary by-pass inlet cannot be used for this purpose as its gas consumption is in the 1-10 ml/min range. In this paper, a new gas inlet device is presented that reduces gas consumption to a value <50 μl/h. The use of a capillary by-pass splitter and a discontinuous sampling procedure allow mass spectrometry to be used as a gas analysis tool in many applications in which small amounts of sample gas are involved.Experiments with standard AA-size NiMH batteries show that hydrogen release dominates during (over)charging at increased charging rates. Beside mass spectrometry, evolved gases are also analysed using Raman spectroscopy. Although some differences are observed, the results of similar experiments show a good agreement.     

The systems Zr(Nb,Ti)(R)O2−δ, R=Yb, Ca—optimization of mixed conductivity and comparison with results of other systems (R=Y and Gd)

In this work we address the optimization of mixed conductivity in fluorite compounds based on zirconia. Phase relations of the new systems YbO_1.5-NbO_2.5-ZrO₂, and CaO-NbO_2.5-ZrO₂ are presented. The limit of the cubic defect fluorite phase in YbO_1.5-NbO_2.5-ZrO₂ closely resembles that of the system YO_1.5-NbO_2.5-ZrO₂, whilst in CaO-NbO_2.5-ZrO₂ is narrow extending to include composition Ca_0.255Nb_0.15Zr_0.595O_1.82 at 1500°C. The influence of dopant ion size, charge and composition on ionic conduction is assessed and parallels are drawn with the systems YO_1.5-NbO_2.5-ZrO₂ and YO_1.5-TiO₂-ZrO₂. Comparison of these results with published data on the Ti containing systems CaO-TiO₂-ZrO₂, GdO_1.5-TiO₂-ZrO₂ shows that the highest mixed conducting compositions can only be offered in the system YO_1.5-TiO₂-ZrO₂ out of all the systems here studied.     

Xyloccensin L, a novel limonoid from Xylocarpus granatum

The isolation and structure elucidation of xyloccensin L from the stem bark of Xylocarpus granatum is described. Xyloccensin L is a highly oxidized heptacyclic A, B, D-seco limonoid with an α-8, 30-epoxy ring and a rare 1, 29 oxygen bridge.     

Synthesis and Characterization of Poly-Ortho-Methylaniline With Different Degrees of Oxidation

Poly-ortho-methylanilines (POT) in three states fully oxidized, fully reduced and oxidized in varying degrees were synthesized by the reaction of common POT (C-POT) having nearly equal amounts of benzenediamine and quinonediimine units with iodine or phenylhydrazine, and the resulting polymers were characterized by IR,~(13)C-NMR, SEM and elemental analysis. The results showed that the quinonediimine unit in C-POT could be reduced by phenylhydrazine to the benzenediamine unit,forming the polymer with low OD (oxidation degree) or in a fully reduced state and that iodine-oxidation resulted in the increase of quinonediimine unit and decrease of benzenediamine unit. The solubility and flexibility of the formed polymers depend strongly on the amount of quinonediimine unit in it. It is necessary to reduce the content of quinonediimine structure unit in order to improve the solubility of aniline-class polymers.     

Photolithographic Patterning and Doping of Silica Xerogel Films

This study shows that conventional photolithography can be applied for patterning native or organic dye-doped silica films (0.5 m thick) obtained via a base-catalyzed sol-gel process. Photoresist was spin-coated onto high optical quality xerogel films, soft-baked, exposed to UV irradiation through a photomask, and developed with a commercial photoresist developing solution. Etching away of the photoresist-unprotected areas of the silica films was carried out with a dilute HF solution, while the remaining unexposed photoresist was removed with acetone. Interdigitated array patterns with features as small as 0.5 mm show a smooth surface and extremely sharp interfaces. Densification of the films at 550°C for 2 h decreases the film thickness by 11%, increases the refractive index from 1.420 to 1.456, and allows for well-defined patterning down to length scales of 10 m. Since the densification conditions are incompatible with organic dopants, it is demonstrated that sol-gel films can be doped after pattering (post-doping) by adsorption of cationic dyes from solution. Scanning electron microscopy reveals that the microstructure of patterned sol-gel films is similar to that of bulk monoliths, indicating that the photolithographic procedure is not harmful to the film quality. All patterned films demonstrate highly regular light diffraction patterns.     

Use of solid electrolyte GeSe-GeI<Subscript>2</Subscript> for electrochemical doping with germanium

Lead tellurite is study to show that solid electrolyte GeSe-GeI₂, which has the optimum composition and contains 5 mol % of GeI₂, can in principle be used for electrochemical doping of semiconducting materials with germanium by the coulometric titration method. Some parameters of the coulometric titration are considered. The doping efficiency is monitored by determining variations in the concentration of charge carriers using the Hall method and by measuring the EMF of corresponding galvanic cells.     

Effects of Poly(ethylene glycol) Doping on the Behavior of Pyrene, Rhodamine 6G, and Acrylodan-Labeled Bovine Serum Albumin Sequestered within Tetramethylorthosilane-Derived Sol-Gel-Processed Composites

We investigate the effects of controlled poly(ethylene glycol) (PEG) doping on the behavior of pyrene, rhodamine 6G (R6G), and acrylodan-labeled bovine serum albumin (BSA-Ac) sequestered within tetramethylorthosilicate (TMOS)-derived sol-gel-processed materials. To probe the dipolarity of the local environment within the composite we performed static fluorescence measurements on pyrene as the composites aged. We found that small levels of PEG loading effected significant enhancements in the local dipolarity surrounding the average pyrene molecule. Time-resolved fluorescence anisotropy measurements were used to follow the rotational reorientation dynamics of R6G as the composites aged. As the PEG loading increased, the R6G reorientational mobility increased. Nitrogen adsorption techniques were used to quantify the effects of PEG doping level on the surface area and final xerogel pore features. A large reduction in surface area was observed with PEG doping, but no detectable change in pore size was noted. The effects of PEG doping on a biomolecule were probed by following the time-resolved fluorescence anisotropy decay of BSA-Ac. These results showed that PEG doping resulted in increased biomolecule dynamics relative to that found for a neat, undoped TMOS-derived composites. Together these results show that PEG doping can be used to tune the sol-gel-processed composite dipolarity, alter the mobility of dopants sequestered within the composite, control analyte acessibility to the sensing chemistry, and modulate the internal dynamics within a biodopant.