Tailoring of ionic supramolecular assemblies based on ammonium carboxylates toward liquid‐crystalline micellar cubic mesophases

Ionic liquid crystals based on ionic complexation of tris(2‐aminoethyl)amine (1) with 3,4,5‐tris(7,7,8,8,9,9,10,10,11,11,12,12,12‐tridecafluorododecyloxy)benzoic acid (2) and with 3,4,5‐tris(2‐octyldodecyloxy)benzoic acid (3) were investigated. The ionic complex with the partially fluorinated alkyl chains (1·2) exhibited a morphological transition from a hexagonal columnar mesophase to a Pm3n micellar cubic phase upon increasing the molar ratio of 2 to 1. For the complex with the branched alkyl chains (1·3) a micellar cubic mesophase was exclusively generated at appropriate composite ratios. The generation of the micellar cubic mesophases is attributed to the introduction of the laterally expanded volume of the alkyl chains compared with the corresponding normal dodecyl chains. Their thermal stabilities were most enhanced at a specific molar ratio of 1:5 for 1·2 and 1:4 for 1·3. This result corresponds to the most suitable chain volume for the stable micellar cubic mesophase.     

Virtual isotropic‐nematic transitions in alkyl cyanobiphenyls

Pretransitional fluctuations in the isotropic phase of liquid crystalline and non‐liquid crystalline alkyl cyanobiphenyls have been investigated using light scattering and magnetic birefringence measurements. We find evidence for a virtual isotropic‐nematic phase transition in short‐chain alkyl cyanobiphenyls with no observable nematic phase. The measured temperature dependence of fluctuations is well‐described by mean‐field theory. Virtual phase transition temperatures extrapolated from separate light scattering and magnetic birefringence experiments are in good agreement. Landau–de Gennes model parameters for the compounds investigated are calculated from the experimental results.     

Challenge to ultra-trace analytical techniques of nuclear materials in environmental samples for safeguards at JAERI: methodologies for physical and chemical form estimation

From a viewpoint of physical and chemical form estimation, ultra-trace analytical techniques of nuclear materials in environmental samples for safeguards have been investigated at Japan Atomic Energy Research Institute. This article deals with (1) an outline of the developed techniques for bulk and particle analyses of uranium and plutonium in the safeguards environmental samples; (2) current R&D on techniques relating to estimation of the physical and chemical form, such as SEM images and EDX spectra for fine particles of nuclear materials and fission track observation applicable to fissile materials; and (3) possible analytical methodologies, as future works, applicable to ultra-trace amounts of nuclear materials in environmental samples.     

Magnetic solid-phase extraction of Zineb by C18-functionalised paramagnetic nanoparticles and determination by first-derivative spectrophotometry

Fe₃O₄-SiO₂-C₁₈ paramagnetic nanoparticles have been synthesised and used as magnetic solid-phase extraction (MSPE) sorbent for the extraction of Zineb from agricultural aqueous samples under ultrasonic condition and quantified through a first-derivative spectrophotometric method. The produced magnetic nanoparticles were characterised by using scanning electron microscopy, X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy and zeta potential reader. The Fe₃O₄-SiO₂-C₁₈ paramagnetic nanoparticles had spherical structures with diameters in the range of 198–201 nm. Further, MSPE was performed by dispersion of Fe₃O₄-SiO₂-C₁₈ paramagnetic nanoparticles in a buffered aqueous solution accompanied by sonication. Next, the sorbents were accumulated by applying an external magnetic field and were washed with 4-(2-pyridylazo) resorcinol-dimethyl sulfoxide solution, for the purpose of desorbing the analyte. The extraction conditions (sample pH, washing and elution solutions, amount of sorbents, time of extraction, sample volume and effect of diverse ions), as well as Zineb-PAR first-order derivative spectra, were also evaluated. The calibration curve of the method was linear in the concentration range of 0.055–24.3 mg L^?1 with a correlation coefficient of 0.991. The limit of detection and limit of quantification values were 0.022 and 0.055 mg L^?1, respectively. The precision of the method for 0.27 mg L^?1 solution of the analyte was found to be less than 3.2%. The recoveries of three different concentrations (0.27, 1.37 and 13.7 mg L^?1) obtained 98.3%, 98.5% and 96.0%, respectively. The proposed Fe₃O₄-SiO₂-C₁₈ paramagnetic nanoparticles were found to have the capability of reusing for 7.0 times.     

Adsorptive transfer voltammetry applied to the study of chromium-induced DNA damage in the presence of curcumin

The interaction between double-stranded (ds) calf-thymus DNA and chromium in the presence of curcumin (CC) was studied by differential pulse adsorptive transfer voltammetry using carbon paste electrode (CPE). Curcumin–Cr complex generated changes in calf thymus DNA. The mechanism for DNA cleavage by curcumin–Cr complex appears to involve both the hydroxyl radical as well as singlet oxygen. The characteristic peak of dsDNA, due to the oxidation of guanine residues, drastically decreased. The increased DNA damage by curcumin–Cr complex was observed in the presence of various concentrations of chromium(VI).     

Magnetic solid-phase extraction using Schiff base ligand supported on magnetic nanoparticles as sorbent combined with dispersive liquid-liquid microextraction for the extraction of phenols from water samples

ABSTRACT

In this work, the magnetic sorbent was developed by covalent binding of a Schiff base ligand, N,N’-bis(3-salicyliden aminopropyl)amine (salpr), on the surface of silica coated magnetic nanoparticles (Salpr@SCMNPs). The core-shell nanoparticle was applied for the magnetic solid-phase extraction (MSPE) combined with dispersive liquid-liquid microextraction (DLLME) of phenolic compounds from water samples prior to gas chromatography-flame ionisation detector (GC?FID). Characterisation of the Salpr@SCMNPs was performed with different physicochemical methods such as Fourier transform infrared (FT-IR), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). Variables affecting the performance of both extraction steps such as pH of the water sample, the sorbent amount, the desorption conditions, the extraction time; and extraction solvent were studied. Under the optimised conditions, the analytical performances were determined with a linear range of 0.01–100 ng mL^?1 and a limit of detection at 0.003–0.02 ng mL^?1 for all of the analytes studied. The intra-day (n = 5) and inter-day (n = 3) relative standard deviations (RSD%) of three replicates were each demonstrated in the range of 6.9–8.9% and 7.3–10.1%, respectively. The proposed method was executed for the analysis of real water samples, whereby recoveries in the range of 92.9–99.0% and RSD% lower than 6.1% were attained.     

Substrate interaction effects on order to disorder transition behavior in block copolymer films

We present an overview of the recent progress on the phase transition in the block copolymer (BCP) films in terms of the interfacial interactions effects of the substrates and the χ (Flory-Huggins segmental interaction parameter) effects between the two blocks. For the BCP films thinner than a critical thickness (L_c) above which the transition is independent of film thickness, the order-to-disorder transition (ODT) increased or decreased with decreasing film thickness depending on the interfacial interaction types. The rapid and slow changes in the ODT were attributed to the relative magnitude of enthalpic contribution to χ between two blocks. Interestingly, a periodic amplification in the block composition for the BCP films suppressed the compositional fluctuation in the film geometry, resulting in the ODT shifts from the bulk ODTs above L_c. This effect of the BCP films was more illustrated by the ODT shift effects depending on the strength of the preferential interactions on the substrates. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Hierarchical Fe3O4@TiO2 Yolk–Shell Microspheres with Enhanced Microwave‐Absorption Properties

A facile and efficient strategy for the synthesis of hierarchical yolk–shell microspheres with magnetic Fe₃O₄ cores and dielectric TiO₂ shells has been developed. Various Fe₃O₄@TiO₂ yolk–shell microspheres with different core sizes, interstitial void volumes, and shell thicknesses have been successfully synthesized by controlling the synthetic parameters. Moreover, the microwave absorption properties of these yolk–shell microspheres, such as the complex permittivity and permeability, were investigated. The electromagnetic data demonstrate that the as‐synthesized Fe₃O₄@TiO₂ yolk–shell microspheres exhibit significantly enhanced microwave absorption properties compared with pure Fe₃O₄ and our previously reported Fe₃O₄@TiO₂ core–shell microspheres, which may result from the unique yolk–shell structure with a large surface area and high porosity, as well as synergistic effects between the functional Fe₃O₄ cores and TiO₂ shells.     

Gadolinium(III)‐Hydroxy Ladders Trapped in Succinate Frameworks with Optimized Magnetocaloric Effect

Two kinds of inorganic gadolinium(III)‐hydroxy “ladders”, [2×n] and [3×n], were successfully trapped in succinate (suc) coordination polymers, [Gd₂(OH)₂(suc)₂(H₂O)]_n ? 2n H₂O ( 1 ) and [Gd₆(OH)₈(suc)₅(H₂O)₂]_n ? 4n H₂O ( 2 ), respectively. Such coordination polymers could be regarded as alternating inorganic–organic hybrid materials with relatively high density. Magnetic and heat capacity studies reveal a large cryogenic magnetocaloric effect (MCE) in both compounds, namely (ΔH=70 kG) 42.8 J kg^?1 K^?1 for complex 1 and 48.0 J kg^?1 K^?1 for complex 2 . The effect of the high density is evident, which gives very large volumetric MCEs up to 120 and 144 mJ cm^?3 K^?1 for complexes 1 and 2 , respectively.     

Butterfly‐Shaped Pentanuclear Dysprosium Single‐Molecule Magnets

Two new “butterfly‐shaped” pentanuclear dysprosium(III) clusters, [Dy₅(μ₃‐OH)₃(opch)₆(H₂O)₃] ? 3 MeOH ? 9 H₂O ( 1 ) and [Dy₅(μ₃‐OH)₃(Hopch)₂(opch)₄(MeOH)(H₂O)₂] ? (ClO₄)₂ ? 6 MeOH ? 4 H₂O ( 2 ), which were based on the heterodonor‐chelating ligand o‐vanillin pyrazine acylhydrazone (H₂opch), have been successfully synthesized by applying different reaction conditions. Single‐crystal X‐ray diffraction analysis revealed that the butterfly‐shaped cores in both compounds were comparable. However, their magnetic properties were drastically different. Indeed, compound 1 showed dual slow‐relaxation processes with a transition between them that corresponded to energy gaps (Δ) of 8.1 and 37.9 K and pre‐exponential factors (τ₀) of 1.7×10^?5 and 9.7×10^?8 s for the low‐ and high‐temperature domains, respectively, whilst only a single relaxation process was noted for compound 2 (Δ=197 K, τ₀=3.2×10^?9 s). These significant disparities are most likely due to the versatile coordination of the H₂opch ligands with particular keto–enol tautomerism, which alters the strength of the local crystal field and, hence, the nature or direction of the easy axes of anisotropic dysprosium ions.