Chromium(III) Hydroxide Solubility in the Aqueous K+-H+-OH?-CO2-HCO 3? -CO 32? -H2O System: A?Thermodynamic Model

Chromium(III)-carbonate reactions are expected to be important in managing high-level radioactive wastes. Extensive studies on the solubility of amorphous Cr(III) hydroxide solid in a wide range of pH (3–13) at two different fixed partial pressures of CO₂(g) (0.003 or 0.03 atm.), and as functions of K₂CO₃ concentrations (0.01 to 5.8 mol⋅kg⁻¹) in the presence of 0.01 mol⋅dm⁻³ KOH and KHCO₃ concentrations (0.001 to 0.826 mol⋅kg⁻¹) at room temperature (22±2 °C) were carried out to obtain reliable thermodynamic data for important Cr(III)-carbonate reactions. A combination of techniques (XRD, XANES, EXAFS, UV-Vis-NIR spectroscopy, thermodynamic analyses of solubility data, and quantum mechanical calculations) was used to characterize the solid and aqueous species. The Pitzer ion-interaction approach was used to interpret the solubility data. Only two aqueous species [Cr(OH)(CO₃)₂²⁻ and Cr(OH)₄CO₃³⁻] are required to explain Cr(III)-carbonate reactions in a wide range of pH, CO₂(g) partial pressures, and bicarbonate and carbonate concentrations. Calculations based on density functional theory support the existence of these species. The log ₁₀ K° values of reactions involving these species [{Cr(OH)₃(am) + 2CO₂(g)⇌Cr(OH)(CO₃)₂²⁻+2H⁺} and {Cr(OH)₃(am) + OH⁻+CO₃²⁻ ⇌Cr(OH)₄CO₃³⁻}] were found to be −(19.07±0.41) and −(4.19±0.19), respectively. No other data on any Cr(III)-carbonato complexes are available for comparisons.     

取代基物化参数及其在药物定量构效关系中的应用

把取代基电性、立体及疏水性物化参数组合建立一种新取代基描述方法, 对环尿素类和N,N-二甲基-2-溴苯乙胺类衍生物进行结构表征. 对训练样本集通过逐步回归筛选变量, 所建多元线性回归方程R2分别为0.853和0.960, 留一法交互检验Rcv2分别为0.723和0.901；用预测集样本作外部预测, 所得Qext2分别为0.7617和0.7653. 结果显示：环尿素类化合物结构中苯环邻位立体、间位疏水、对位疏水及立体因素对该类药物抗HIV活性产生阻抑作用； N,N-二甲基-2-溴苯乙胺类苯环上取代基立体因素及对位给电子效应有利于提高肾上腺素能阻断活性.     

Improvement of plant parameters of the ROBO gamma irradiation facility due to design modification

Two industrial scale, “ROBO” type ⁶⁰Co gamma irradiation facilities have recently been put into operation in Syria and Peru, and the dosimetry commissioning of both plants have been carried out to determine dose distribution within products and to calculate plant parameters such as efficiency, dose uniformity ratio and throughput. There are some design modifications between the two plants in connection with the location of the carriers with respect to the source plaque and also to each other. The effect of these construction modifications on the plant parameters is discussed in the analysis of the dose distribution data measured in the carriers with depth and height among the four irradiation rows on both sides of the source plaque. The plant parameters were also calculated for different product densities using the technical data of the facilities, and the calculated and measured results were compared to each other.     

Effects of processing parameters on the mechanical properties of polypropylene random copolymer

The mechanical properties of polypropylene random copolymer (PP-R) with different processing parameters were studied. Special attention is devoted to the investigation of the influence of masterbatch addition on the variation in the mechanical properties of injection moulded PP-R. Tensile, instrumented Charpy impact, Shore D hardness, differential scanning calorimeter (DSC) and Vicat softening temperature (VST) tests were conducted on the test samples containing different colour masterbatches varying from 0.5 to 10 wt%. The observed changes in the mechanical behaviour are explained by the type and level of masterbatch content. The natural UV weathering performance of the PP-R material was studied from the masterbatch type point of view. The effect of processing parameters on material performance was studied on samples which were directly obtained from extruded pipes and on injection moulded samples.

Finally, the effects of storage time on the polymer properties were investigated.     

Measurement of rheological properties of corn stover suspensions

Corn stover is currently being evaluated as a feedstock for ethanol production. The corn stover suspensions fed to reactors typically range between 10 and 40% solids. To simulate and design bioreactors for processing highly loaded corn stover suspensions, the rheologic properties of the suspension must be measured. In systems with suspended solids, rheologic measurements are difficult to perform owing to settling in the measurement devices. In this study, viscosities of corn stover suspensions were measured using a helical ribbon impeller viscometer. A calibration procedure is required for the impeller method in order to obtain the shear rate constant, k, which is dependent on the geometry of the measurement system. The corn stover suspensions are described using a power law flow model.     

Hydrolysis of (CH3)3Sn+ in Various Salt Media

The hydrolysis of trimethyltin(IV) has been studied by potentiometry (H⁺ -glass electrode) and calorimetry in various salt media (NaNO₃, NaCl, KCl, Na₂SO₄, and NaNO₃—NaCl mixtures). The effect of ionic strength on the hydrolysis constants is accounted for by a simple Debye–Hückel type equation and by Pitzer equations. The results allow us to obtain H for hydrolysis and the temperature dependence of the Pitzer parameters. The resulting coefficients can be used to examine the speciation of (CH₃)₃Sn⁺ in multicomponent electrolyte solutions, such as natural waters, over a wide range of temperature and ionic strength.     

Analysis of long-term distributions of calibration parameters and calibration intervals for an atomic absorption spectrophotometer

 A combination of "black box" and "calendar-time" methods for the determination of calibration intervals of an analytical measuring instrument is discussed. Since the methods require information on the distributions of the calibration parameters, such information is described for an atomic absorption spectrophotometer, as an example. The hypotheses on the normal distribution of the calibration parameters are tested using the ω²-criterion and accepted at 0.90–0.95 levels of confidence. Corresponding control charts are designed for indication of warning and action limits of the calibration parameters, and diagnoses of outliers in further calibrations. Control charts indicate also when the calibration should be done according to the full program of the equipment manufacturer. Received: 15 April 2000 / Accepted: 24 July 2000     

RATE OF INTRA-MOLECULAR CONTACT FORMATION IN SHORT TWO-DIMENSIONAL COMPACT POLYMERS CHAINS

It is important to know the rate of intra-molecular contact formation in proteins in order to understand how proteins fold clearly. Here we investigate the rate of intra-molecular contact formation in short two-dimensional compact polymer chains by calculating the probability distribution p(r) of end-to-end distance r using the enumeration calculation method and HP model on two-dimensional square lattice. The probability distribution of end-to-end distance p(r) of short two-dimensional compact polymers chains may consist of two parts, i.e. p(r) = p1(r) p2(r), where p1(r) and p2(r) are different for small r. The rate of contact formation decreases monotonically with the number of bonds N, and the rate approximately conforms to the scaling relation of k(N) ∝ N-α. Here the value of α increases with the contact radius a and it also depends on the percentage of H (hydrophobic) residues in the sequences of compact chains and the energy parameters of εHH, εHP and εPP . Some comparisons of theoretical predictions with experimental results are also made. This investigation may help us to understand the protein folding.     

Analysis on absorption spectra of Nd in poly(methyl methacrylate)

The absorption spectrum of neodymium (III) (Nd³⁺ doped in poly(methyl methacrylate) was measured. The Nephlauxetic effect was found in the spectrum compared to other spectra of Nd³⁺ doped in various matrices. The experimental data used, Slater-Condon parameters (F₂,F₄,F₆) and Lander parameter (ζ_4f) were calculated by the Taylor series expansion based on the assumption that the energy separation between J-levels of the 4fⁿ-configuration is a function of F₂,F₄,F₆ and ζ_4f. The Judd-Ofled intensity parameters (Ω₂,Ω₄,Ω₆) were also calculated. Analysis of the Nephlauxetic effect and the parameters variation on the host matrices was carried out.     

反应条件对煤加氢热解产物分布的影响

本文以内蒙古红庙煤为研究对象，在温度４５０－６５０℃和氢氯压力２－５ＭＰＡ的范围内，在加压固定床反应器上考察了各种因素包括传质作用对煤加氢热解产物分布的影响。研究表明，转化率和焦油收率随最终反应温度，氢气压力和流速的升高而升高，随加速速率的增大而降低。