Acoustic Waves in Channels with Porous and Permeable Walls

The propagation of acoustic disturbances in a porous medium crossed by numerous cracks (double porosity medium) is a complex problem that we here simplify by investigating the acoustics of a permeable channel. We consider a fluidfilled channel in two possible geometries, a slit or a cylindric pipe. The channel is surrounded by a porous medium (saturated with the same fluid) and is itself surrounded by an external medium. To simulate the average properties of the cracked rock, the external medium is either nonpermeable (few connections between cracks) or highly permeable (numerous connections). We present analytical and numerical results concerning acoustic disturbances of small amplitude generated in the channel, such as harmonic waves, step disturbanses and pulses.     

A new interpretation of an event attributed to a magnetic monopole

An alternate and a new interpretation is given for the event attributed to a magnetic monopole by Price and coworkers found in an emulsion plastic sandwich stack flown from Sioux City, Iowa, USA on 18 September 1973. The electron pick-up and stripping cross-sections of nuclei ofZ∼70–80 andv∼0.6–0.7c in Lexan polycarbonate are calculated using the formulae given by Nikolaev. It is shown that the corresponding mean free paths are of the order of thickness (∼250μ) of Lexan plastic sheets used by them. In such a case asnapshot of these processes is believed to have been observed in plastic sheets. Monte-Carlo simulations of the event have been made for three values of charges at the top of the main Lexan stack, namelyZ=83, 78 and 70 respectively. The event is thus interpreted as a cosmic ray nucleus ofZ=70–83 andv=0.6–0.7c losing and capturing electrons (mainly the latter) as it passes through the stack. The probability of the occurrence of such an event is estimated by several methods.     

Investigation of scattering of elastic waves by cylinders in 1-3 piezocomposites

The scattering behavior of P-waves in piezoelectric composites with 1–3 connectivity is studied. The method of wave function expansion is adopted for the theoretical derivations. Analytical expressions are obtained for the distributions of mechanical displacement in z-direction along the circumferences of piezoelectric cylinders. These solutions are used to study the influence of each element of the stiffness matrix and the piezoelectric matrix on the various resonant modes of vibration. Numerical results obtained indicate that perturbations of the elements c₄₄ and e₁₅ significantly affect resonant frequencies and amplitudes, perturbations of c₁₁ and c₁₂ have pronounced effects on resonant modes of high frequencies also. However, the resonant modes are not so sensitive to the perturbations of c₁₃, e₃₁ and e₃₃. The dynamic characteristics of 1–3 connectivity piezoelectric composites exposed here are meaningful for the design and manufacture of sensor/actuator elements by this kind of composites as well as the on-line health monitoring of the mechanical properties variations of the composites itself.     

Evolution of the Electroluminescence Spectra and the Acoustic Emission of the Epitaxial Structures of GaAsP

The dependence of the spectral position of the electroluminescence bands of epitaxial light-emitting diode n ⁺–n–p structures (GaAs_0.15P_0.85) on the density of a direct heterojunction current at different successive instants of time — before an acoustic emission and after it — has been revealed. The shifts of the electroluminescence bands accompanied by acoustic emission can be divided into three types according to the density of the current: (1) short-term shifts due to relaxation of the defect structure of a sample — at relatively low currents, (2) the magnitude of the reverse shift being determined by the current density — at large currents, and (3) formation of an IR band (1.5–1.1 eV) with irreversible degradation changing in the red (1.75 eV) and green (2.19 eV) bands of the electroluminescence spectrum — at ultrahigh currents (100–200 A/cm²).     

Elastic friction drive of surface acoustic wave motor

Importance of elastic deformation control to obtain large output force with a surface acoustic wave (SAW) motor is discussed in this paper. By adding pre-load to slider, stator and slider surfaces are deformed in a few tens nanometer. Appropriate deformation in normal direction against normal vibration displacement amplitude of SAW existed. By moderate deformation, the output force of the SAW motor was enlarged up to about 10 N and no-load speed was 0.7 m/s. To produce this performance, the transducer weight and slider size were only 4.2 g and 4 x 4 mm(2).By traveling wave propagation, surface particles of the SAW device move in elliptical motion. Due to the amplitude of the elliptical motion is 10 or 20 nm order, the contact condition of the slider is very critical. To control the contact condition, namely, the elastic deformation of the slider and stator surface in nanometer order, a lot of projections were fabricated on the slider surface. The projection diameter was 20 micro m. In static condition, the elastic deformation and stress were evaluated with the FEM analysis. From this calculation and the simulation result, it is consider that the wave crest is distorted, hence the elasticity has influence on the friction drive condition.Elastic deformation of the stator surface beneath the projection from the initial position were evaluated. In 4 x 4 mm(2) square area, the sliders had from 1089 to 23,409 projections. Depression was independent to the contact pressure. However, the output force depended on the depression although the projection density were different. From the view point of the output power of the motor, the proper depression was independent to the projection density. Around 25 nm depression, the output force and output power were maximized. This depression value was almost same as the vibration displacement amplitude of the stator transducer.     

Propagation of Bleustein-Gulyaev waves in a prestressed layered piezoelectric structure

Based on the theories of nonlinear continuum mechanics, piezoelectricity and elastic waves in solids, theoretical analysis of Bleustein-Gulyaev surface acoustic wave propagation in a prestressed layered piezoelectric structure are described. Numerical calculations are performed for the case that the layer and the substrate are identical LiNbO(3) except that they are polarized in opposite directions. It is found that an almost linear behavior of the relative change in phase velocity versus the initial stress is obtained for both surface electrically free and shorted cases. Potential applications in the design of acoustic wave devices are suggested.     

Operator kernel estimates for functions of generalized Schrödinger operators

We study the decay at large distances of operator kernels of functions of generalized Schrödinger operators, a class of semibounded second order partial differential operators of mathematical physics, which includes the Schrödinger operator, the magnetic Schrödinger operator, and the classical wave operators (i.e., acoustic operator, Maxwell operator, and other second order partial differential operators associated with classical wave equations). We derive an improved Combes-Thomas estimate, obtaining an explicit lower bound on the rate of exponential decay of the operator kernel of the resolvent. We prove that for slowly decreasing smooth functions the operator kernels decay faster than any polynomial.

     

声波导中的局部正交变换

In this paper, a local orthogonal transformation is created to transform the Helmholtz waveguide with curved interface to the one with a flat interface within the two-layer medium, and the Helmholtz equation uxx uzz k^2(x,z)u=0 is transformed to Vxx αVzz βVz γV=0. Numerical results demonstrate that the transformation is more feasible. This transformation is particularly useful for the research on wave propagation in acoustic waveguide.     

Noise Stability of SIS Receivers

There is a strong interest in the submillimeter astronomy community to increase the IF bandwidth of SIS receivers in order to better facilitate broad spectral linewidth and continuum observations of extragalactic sources. However, with an increase in receiver IF bandwidth there is a decrease in the mixer stability. This in turn effects the integration efficiency and quality of the measurement. In order to better understand the noise mechanisms responsible for reducing the receiver stability, we employed a technique first described by D.W. Allan and later elaborated upon by Schieder et al. In this paper we address a variety of factors that degrade the noise stability of SIS receivers. The goal of this exercise is to make recommendations aimed at maximizing SIS receiver stability.     

有限温度下二维Heisenberg铁磁系统的声子衰减

在二维正方Heisenberg铁磁系统的基础上建立了磁振子-声子相互作用模型. 利用松原格林函数理论研究了系统的声子衰减，计算了布里渊区的主要对称点线上的声子衰减曲线. 发现在第一布里渊区，在Δ线上，横向声频支声子无衰减，在Z线上，纵向声频支声子无衰减；横向声频支声子衰减比纵向声频支声子衰减至少大一个数量级，并讨论了各项参数的变化对横向声频支声子衰减与纵向声频支声子衰减的影响. 根据声子衰减与声子寿命的关系，声子衰减与声子态密度的关系，可以讨论横向声频支声子与纵向声频支声子的寿命与态密度. 关键词： 磁振子-声子相互作用 横向声频支声子衰减 纵向声频支声子衰减 声子寿命